PHILTOP 12pcs Front End Suspension Kit for Ford Expedition Lincoln Navigator 2004-2006, 2 Upper Control Arms 2 Lower Ball Joints

PHILTOP 12pcs Front End Suspension Kit for Ford Expedition Lincoln Navigator 2004-2006, 2 Upper Control Arms 2 Lower Ball Joints

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7783CAK539SUS

Specifications

Brand
PHILTOP
Items Included
1x Front Upper Passenger Side Control Arm - K80718 1x Front Upper Driver Side Control Arm - K80719 2x Front Lower Ball Joints - K80039 2x Front Sway Bar End Link - K80239 2x Front Outer Tie Rod Ends - ES3695 2x Front Inner Tie Rod Ends - EV456 2x Front Rack & Pinion Boots - Bt
Quantity
12
Position
Front Upper
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
2L1Z3280GA,2L1Z3A130CA,6L1Z3A130A,4L1Z3085AA,4L1Z3084AA,2L1Z5K483AA,2L1Z5K483AD,2L1Z3280FA,6L1Z3084AA,6L1Z3085AA
Part Number
K80039,ES3695,K80239,EV456,RK80718,MK80239,RK80719,MES3695,TC7692,MEV456,TA5219,521015,GK80718,CB85007PR,CB85007,CB85008PR,CB85008,GEV456

Highlights

  • #41,550 in Automotive (See Top 100 in Automotive)
  • #77 in Automotive Replacement Control Arms
  • Fitment: Compatible with Ford Expedition 2004-2006 Standard Suspension ONLY, Lincoln Navigator 2004-2006 Standard Suspension ONLY
  • Kit Includes: 1x Front Upper Passenger Side Control Arm - K80718; 1x Front Upper Driver Side Control Arm - K80719; 2x Front Lower Ball Joints - K80039; 2x Front Sway Bar End Link - K80239; 2x Front Outer Tie Rod Ends - ES3695; 2x Front Inner Tie Rod Ends - EV456; 2x Front Rack & Pinion Boots - BT
  • High Quality: Polishing and rust prevention; the anti-corrosion coating on the control arm can prolong the service life. All materials used for the control arm coating are environmentally friendly
  • Easy Installation: Precision tolerances for easy installation on all parts. Control arm has steering alignment that ensure you a perfect work
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20042004 - 200620062005 - 20062004200420042005 - 200620042004 - 20062004200420062004 - 200520062006
MakeFordFordFordFordFordFordFordFordFordFordFordFordFordLincolnLincolnLincoln
ModelExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionNavigatorNavigatorNavigator
TrimEddie BauerEddie BauerKing RanchLimitedNBXNBXXLSXLSXLTXLTXLT SportXLT SportXLT SportBaseLuxuryUltimate
Engine4.6L V85.4L V85.4L V85.4L V84.6L V85.4L V84.6L V85.4L V84.6L V85.4L V84.6L V85.4L V85.4L V85.4L V85.4L V85.4L V8
Note----------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

4.6/5

Based on 5 reviews

560%
440%
30%
20%
10%

Brad_AutoParts_241

02/27/2026

My Expedition was feeling very unstable. After installing this kit, it drives like it's on rails. So much more confidence on the highway now.

Jennifer_Auto_308

02/16/2026

The quality of these parts is outstanding, especially considering the price. My Navigator feels solid and handles bumps like a champ now.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.