PHILTOP 12pcs Suspension Kit Fit for Ford Explorer Mercury Mountaineer 1998-2001,4 Rear Sway Bar End Links+2 Front Lower Ball Jo

PHILTOP 12pcs Suspension Kit Fit for Ford Explorer Mercury Mountaineer 1998-2001,4 Rear Sway Bar End Links+2 Front Lower Ball Jo

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6082CAK5383US

Specifications

Brand
PHILTOP
Items Included
2x Rear Stabilizer / Sway Bar End Links- RK80139 2x Front Stabilizer / Sway Bar End Links - K7275 2x Front Lower Ball Joints - K8695T 1x Front Upper Control Arm + Ball Joint (Passenger) - K80068 1x Front Upper Control Arm + Ball Joint (Driver) - K8708 2x Front Outer Tie Rod Ends - ES3461 2x Front Inner Tie Rod Ends - EV317
Quantity
12
Position
Front Upper
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
MEOE33,AU2Z3280A,F57Z3050BB,5L5Z3A130AA,1F703224X,F87Z3A130BA,9L5Z3280A,F5TZ3083A,F57Z3280AA,6L5Z3085AA,3L5Z3083AA,2L5Z3083AA,ZZP03224X,6L5Z3084AA,1F2034211A,1F7035211,F5TZ3082A,8L5Z3085L,8L5Z3084R,1F6035211A,F77Z3082CA,2L5Z3082AA,F77C3082CA,2L5Z3084BA,3L5Z3084AA,1FAA34211,1F6034211,F87Z3084CA,1FAA35211,ZZP034211,1FAA3224X,ZZP035211,1F803224X,YL2Z5K484AA,F57Z5K484A
Part Number
K7275,K8695,K8695T,ES3461,EV317,MK8695T,RK8708,RK80068,K80139,MES3461,MEV317,TA2211,MK80139,GEV317,IS317XL,TI85250XL

Highlights

  • Fitment: 1998-2001 Ford Explorer ,1998-2001 Mercury Mountaineer
  • Kit Includes: 2x Rear Stabilizer / Sway Bar End Links- RK80139;2x Front Stabilizer / Sway Bar End Links - K7275;2x Front Lower Ball Joints - K8695T;1x Front Upper Control Arm + Ball Joint (Passenger) - K80068;1x Front Upper Control Arm + Ball Joint (Driver) - K8708;2x Front Outer Tie Rod Ends - ES3461;2x Front Inner Tie Rod Ends - EV317
  • OE NUMBER: K80139, K7275, K80068, ES3461, EV317, K8695
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1998 - 20011998 - 20011998 - 20011998 - 20012000 - 20011998 - 20001998 - 19992000 - 20011999 - 200119991998 - 20011998 - 20011998 - 20011998 - 2001
MakeFordFordFordFordFordFordFordFordFordFordFordFordMercuryMercury
ModelExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerMountaineerMountaineer
TrimEddie BauerEddie BauerLimitedLimitedPostalSportXLXL FleetXLSXLSXLTXLTBaseBase
Engine4.0L V65.0L V84.0L V65.0L V84.0L V64.0L V64.0L V64.0L V64.0L V65.0L V84.0L V65.0L V84.0L V65.0L V8
Note
w/ One-Piece Design
w/ One-Piece Design
w/ One-Piece Design
w/ One-Piece Design
w/ One-Piece Design
w/ One-Piece Design
w/ One-Piece Design
w/ One-Piece Design
w/ One-Piece Design
w/ One-Piece Design
w/ One-Piece Design
w/ One-Piece Design
w/ One-Piece Design
w/ One-Piece Design

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.7/5

Based on 3 reviews

567%
433%
30%
20%
10%

Mike from Texas_60

01/07/2026

Seriously impressed with the build quality of these components. For a 20-year-old SUV, it now handles like it just rolled off the assembly line. Great value.

Jennifer_Auto_567

04/20/2026

Got this kit delivered in just a couple of days. Installation was pretty straightforward, all the parts were there and easy to identify. Great service.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.