2016-2021 Chevrolet Malibu 1.8L/1.5L/2.0L | 2 PC Front Rear Wheel Bearing | 513398 - PHILTOP

2016-2021 Chevrolet Malibu 1.8L/1.5L/2.0L | 2 PC Front Rear Wheel Bearing | 513398 - PHILTOP

Triple-Lip Seal

Front、Rear

AISI 52100

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
2592WBR2001US

Specifications

Brand
PHILTOP
ABS Type
Magnetic Ring
Lug Count
5
Position
Front、Rear
Flange Bolt Hole Count
3
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front、Rear Wheel Hub and Bearing Assembly - 513398,Installation Instructions
Bolt Pattern
5 X 4.53
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.6 in
Wheel Stud Size
M12x1.5
Flange Offset
1.63 in/41.5 mm
Flange Diameter
5.74 in/145.9 mm
Brake Pilot Diameter
2.78 in/70.5 mm
Warranty Period
2-Year
Part Number
513398,H513316
Quantity
2

Highlights

  • Fitment: Front Wheel bearing hub assembly compatible with 2016-2019 Chevrolet Malibu, 2016-2017 Buick Envision, 2017-2019 Buick LaCrosse FWD, 2018-2019 Buick Regal Sportback FWD, 2018-2019 Buick Regal TourX, 2018 Buick Envision AWD, 2017-2019 Buick LaCrosse AWD, 2018 Buick Envision FWD, 2018-2019 Buick Cascada, 2018-2019 Buick Regal Sportback AWD
  • Superior Quality: Our wheel hubs are made of high quality materials and have the same performance as the original equipment. In addition, the wheel bearing hub assembly is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
  • Recovery Performance: PHILTOP Wheel hub bearing enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. Bearing can provide you with a smooth and quiet driving environment, enhancing your driving experience.
  • Installation: Wheel hubs excellent assembly performance, precise overall structure, easy and quick installation.
  • Customer Service: PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2018 - 20192018 - 20192018 - 20192017 - 20182017 - 20182017 - 20182016 - 20182018 - 20192018 - 201920172018 - 20192017 - 20192018 - 20192017 - 20192018 - 20192017 - 201920192019 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20192018 - 20202018 - 20202018 - 20202016 - 20192016 - 20202016 - 20202016 - 202020162016 - 20202019 - 2020
MakeBuickBuickBuickBuickBuickBuickBuickBuickBuickBuickBuickBuickBuickBuickBuickBuickBuickBuickBuickBuickBuickBuickBuickBuickBuickBuickChevroletChevroletChevroletChevroletChevroletChevroletChevrolet
ModelCascadaCascadaCascadaEnvisionEnvisionEnvisionEnvisionLaCrosseLaCrosseLaCrosseLaCrosseLaCrosseLaCrosseLaCrosseLaCrosseLaCrosseLaCrosseRegal SportbackRegal SportbackRegal SportbackRegal SportbackRegal SportbackRegal SportbackRegal TourXRegal TourXRegal TourXMalibuMalibuMalibuMalibuMalibuMalibuMalibu
TrimBasePremiumSport TouringBaseEssencePreferredPremiumAvenirBaseBaseEssenceEssencePreferredPreferredPremiumPremiumSport TouringAvenirBaseEssenceGSPreferredPreferred IIBaseEssencePreferredHybridLLSLTLTPremierRS
Engine1.6L L41.6L L41.6L L42.5L L42.5L L42.5L L42.0L L43.6L V62.5L L43.6L V62.5L L43.6L V62.5L L43.6L V62.5L L43.6L V63.6L V62.0L L42.0L L42.0L L43.6L V62.0L L42.0L L42.0L L42.0L L42.0L L41.8L L41.5L L41.5L L41.5L L42.0L L42.0L L41.5L L4
Note---------------------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.8/5

Based on 5 reviews

580%
420%
30%
20%
10%

Margaret Barstow

11/10/2024

Verified buyer

The quality of the product is very good. Read more

DaveTheMechanic_364

12/20/2025

My car was making a grinding noise, and these new hubs totally eliminated it. The ride is so much smoother now, and I feel a lot safer driving. Big improvement from the old ones.

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

Noise may come from another wheel bearing, the tire, brake, CV joint, or an installation issue. Recheck the installation and inspect nearby components before assuming the new bearing is faulty.

Keep the part clean, avoid impact through the rolling elements, use the correct pressing surface, and tighten fasteners to the specified torque. Professional installation is recommended if special tools are required.