2007-2021 Toyota Tundra 5.7L V8/4.0L V6/4.6L V8/4.7L V8 | 2 PC Front Wheel Bearing | 435020C021/515202 - PHILTOP

2007-2021 Toyota Tundra 5.7L V8/4.0L V6/4.6L V8/4.7L V8 | 2 PC Front Wheel Bearing | 435020C021/515202 - PHILTOP

Triple-Lip Seal

Front

AISI 52100

4.9

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8120WBR1115US

Specifications

Brand
PHILTOP
ABS Type
Magnetic Ring
Lug Count
5
Position
Front
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front Wheel Hub and Bearing Assembly - 515202,Installation Instructions
Bolt Pattern
5 X
Surface Finish
Polished, Rust Protected
Wheel Stud Size
M14*1.5
Warranty Period
2-Year
OE Number
435020C021,435020C031,435700C010
Part Number
515202,H515103,WE60786,40644002,515103,BM500017,FW211,101979,P515103,0514194,696103,WH515103,WABM515103,FW7103,PT515103,7700012,29515103,40644002E,1411258933
Quantity
2

Highlights

  • Fitment: Front Wheel bearing hub assembly compatible with 2007-2018 Toyota Tundra 4WD, 2008-2018 Toyota Sequoia 4WD
  • Superior Quality: Our wheel hubs are made of high quality materials and have the same performance as the original equipment. In addition, the wheel bearing hub assembly is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
  • Recovery Performance: PHILTOP Wheel hub bearing enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. Bearing can provide you with a smooth and quiet driving environment, enhancing your driving experience.
  • Installation: Wheel hubs excellent assembly performance, precise overall structure, easy and quick installation.
  • Customer Service: PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2008 - 20222021 - 20222008 - 20222010 - 20122008 - 20092008 - 20222020 - 20222018 - 20222014 - 20212007 - 20132010 - 20132007 - 20092007 - 201320102007 - 20092007 - 2021202120102010 - 202120142014 - 20192014 - 20212007 - 20112010 - 20112014 - 20192007 - 20092007 - 20112014 - 20212015 - 20172019 - 20212021
MakeToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelSequoiaSequoiaSequoiaSequoiaSequoiaSequoiaSequoiaSequoiaTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundra
TrimLimitedNightshadePlatinumSR5SR5SR5TRD ProTRD Sport1794 EditionBaseBaseBaseBaseLimitedLimitedLimitedNightshadePlatinumPlatinumSRSRSRSR5SR5SR5SR5SR5SR5TRD ProTRD ProTrail
Engine5.7L V85.7L V85.7L V84.6L V84.7L V85.7L V85.7L V85.7L V85.7L V84.0L V64.6L V84.7L V85.7L V84.6L V84.7L V85.7L V85.7L V84.6L V85.7L V84.0L V64.6L V85.7L V84.0L V64.6L V84.6L V84.7L V85.7L V85.7L V85.7L V85.7L V85.7L V8
Note
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.9/5

Based on 8 reviews

588%
413%
30%
20%
10%

Customer photos and videos

Andrew SamuelAndrew Samuel

03/02/2026

Verified buyer

So far so good. Fairly easy to replace. I’ll update in a couple thousand miles.

Customer

03/02/2026

Verified buyer

Work perfect on my 2014 tundra easy to install working great

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

Alignment may be advisable if suspension or steering components are disturbed during the repair. Follow the vehicle service procedure and check alignment if the vehicle pulls or the steering wheel is off-center.

Noise may come from another wheel bearing, the tire, brake, CV joint, or an installation issue. Recheck the installation and inspect nearby components before assuming the new bearing is faulty.