PHILTOP 2 Piece Rear Upper 2-4" Lift Control Arm Kit Compatible with 03-07 LX470 03-09 GX470 10-23 GX460 03-09 Sequoia 4.7L 03-2

PHILTOP 2 Piece Rear Upper 2-4" Lift Control Arm Kit Compatible with 03-07 LX470 03-09 GX470 10-23 GX460 03-09 Sequoia 4.7L 03-2

Corrosion Resistant

Deformation Resistant

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3159CAK222XUS

Specifications

Brand
PHILTOP
Items Included
2x Rear Upper 2-4" Diameter Control Arms
Quantity
2
Position
Rear Upper
Surface Finish
Polished, Rust Protected
Material
Steel
Warranty Period
2-Year

Highlights

  • #65,321 in Automotive (See Top 100 in Automotive)
  • #145 in Automotive Replacement Control Arms
  • Kit Includes: 2x Rear Upper 2-4" Diameter Control Arms
  • Fitment: Compatible with 4Runner 2003-2024, GX460 2010-2023, FJ Cruiser 2007-2014, Sequoia 2003-2007, GX470 2003-2009, LX470 2003-2007, Sequoia 4.7L 2008-2009
  • 2-4" Lift Kit: The 2-4 inch upper control arms lift the vehicle rear 2-4 inches, to even out the overall body of the vehicle and give you extra room for larger tires. Enhance steering and suspension performance, and ensure smooth driving and stable operation of the car
  • Easy Installation: Precision tolerances for easy installation on all parts. Control arm has steering alignment that ensure you a perfect work
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010 - 202320232014 - 20232010 - 20232003 - 20092003 - 200720232003 - 20242003 - 20092020 - 202120102003 - 20242003 - 20092018 - 20242003 - 20092003 - 20092017 - 20242018 - 20242015 - 20242022 - 20242010 - 20162021 - 20222020 - 20212007 - 2014200720082003 - 20072003 - 2009
MakeLexusLexusLexusLexusLexusLexusToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelGX460GX460GX460GX460GX470LX4704Runner4Runner4Runner4Runner4Runner4Runner4Runner4Runner4Runner4Runner4Runner4Runner4Runner4Runner4Runner4Runner4RunnerFJ CruiserFJ CruiserFJ CruiserSequoiaSequoia
TrimBaseBlack Line EditionLuxuryPremiumBaseBase40th Anniversary EditionLimitedLimitedNightshadeSR5SR5SR5SR5 PremiumSportSportTRD Off-RoadTRD Off-Road PremiumTRD ProTRD SportTrailTrailVentureBaseTRD Special EditionTrail Teams Special EditionLimitedSR5
Engine4.6L V84.6L V84.6L V84.6L V84.7L V84.7L V84.0L V64.0L V64.7L V84.0L V62.7L L44.0L V64.7L V84.0L V64.0L V64.7L V84.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.7L V84.7L V8
Note----------------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

4.8/5

Based on 6 reviews

583%
417%
30%
20%
10%

eugene price

11/26/2024

Verified buyer

I've been thrilled with the PHILTOP Rear Upper Control Arms I installed on my 4Runner. The vehicle-specific design ensured a perfect fit, and the increased stability has made my drives smoother and more responsive. The quality is top-notch, and the ease of installation saved me time and hassle. Highly recommend for anyone looking to enhance their suspension system. Read more

Stephan W

04/22/2024

Verified buyer

Works as expected.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.