[Wheel Spacers Specification] --- Bolt Pattern: 5x115mm ; | Thickness: 20mm ; | Thread Pitch: M14x1.5 ; | Hub Bore: 71.5mm ; | Recommended torque: 85-90 ft/lbs. !!! Note: If the length of the vehicle bolts exceed the thickness of the wheel adapters, you need to cut the vehicle bolts
[High Quality] ---5x115 Wheel Spacer is truly forged from lightweight anodized 6061-T6 aircraft-grade aluminum alloy, the surface anodized coating can protect the metal surface from environmental erosion under extreme conditions. CNC precisely machined, with pre-installed heat treated 12.9 grade carbon steel studs, 7-10 times the corrosion resistance of similar products. The installation fit more better, so as to prevent wheel vibration and maintain the stock driving
[Aggressive Driving Experience] --- These 5x115 Wheel Spacers can move your wheels further out from the wheel hub, allow for larger tire installation to the vehicle. Installing the wheel spacers can fix brake caliper clearance issues, correct tire friction issues, increase cornering stability, give your vehicle a more aggressive stance
[Professional Services] --- Before placing an order, confirm compatibility by entering the year, make, and model in the PhiltopAuto suitability filter in the upper left corner. --- IMPORTANT SAFETY ADVISORY --- : Torque lug bolts/nuts to manufacturer specifications. Check and re-torque all hardware after 25-50 miles. See Product Description for additional install information
Compatible Vehicles
Check if this fits your vehicle
Vehicle(s) Fit Information
Year
2005 - 2007
2011
2012
2013 - 2014
2013 - 2014
2015 - 2016
2017
2005 - 2008
2009
2010 - 2011
2012
2013 - 2014
2015 - 2016
2017 - 2020
2023
2013 - 2014
2012
2013 - 2014
2015 - 2016
2017
2015 - 2016
2017
2005 - 2008
2009
2010
2008
2009
2005 - 2008
2009
2010
2011
2012
2015 - 2016
2017 - 2020
2010
2012
2013 - 2014
2015 - 2016
2017 - 2022
2023
2010
2012
2013 - 2014
2015 - 2016
2017 - 2022
2023
2012
2013 - 2014
2013
2009
2010
2005 - 2008
2009
2010
2018 - 2022
2023
2018 - 2022
2023
2016
2017
2018
2019
2020
2021 - 2022
2023
2009 - 2010
2011
2012
2013 - 2014
2015 - 2017
2018
2019
2020
2021 - 2022
2023
2017
2018
2019
2012
2015 - 2016
2016
2016 - 2017
2018
2019
2020
2021 - 2022
2023
2021
2019
2020
2021 - 2022
2023
2016
2014
2009 - 2010
2011
2015 - 2017
2018
2018
2023
2015 - 2017
2018
2019
2020
2021 - 2022
2023
2019
2020
2021 - 2022
2023
2019
2020
2021 - 2022
2023
2018
2019
2020
2021 - 2022
2023
2022
2020
2021 - 2022
2023
2008
2009 - 2010
2011
2012
2013 - 2014
2012
2013 - 2014
2015 - 2017
2018
2019
2020
2021 - 2022
2023
2012
2015 - 2017
2018
2015
2017
2018
2017
2018
2021
2006
2007
2006
2007
2017 - 2018
2017 - 2018
2006
2018
2019 - 2022
2023
2018
2006
2007 - 2008
2009
2010
2011
2012 - 2013
2014
2015
2016 - 2018
2019 - 2022
2023
2006
2007 - 2008
2009
2010 - 2011
2012 - 2013
2014
2015
2016 - 2018
2019 - 2022
2023
2006
2007 - 2008
2009
2010 - 2011
2012 - 2013
2014
2015
2016 - 2018
2019 - 2022
2023
2017 - 2018
2015
2016
2015
2016 - 2018
2007 - 2008
2009
2010
2006
2007 - 2008
2009
2010
2011
2012 - 2013
2014
2015
2016 - 2017
2008
2009
2010 - 2011
2012 - 2013
2015
2016 - 2018
2015
2016 - 2018
2019 - 2020
2021 - 2022
2023
2023
2020 - 2022
2023
2023
2022
2006
2007 - 2008
2009
2010
2012 - 2013
2014
2006
2007 - 2008
2009
2010
2012 - 2013
2014
2015
2016 - 2018
2019 - 2022
2023
2012
2018
2018
2019 - 2022
2023
2020
2022
2023
2005 - 2008
2005 - 2008
2007 - 2008
2006 - 2008
2005 - 2008
2005
Make
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Dodge
Model
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Challenger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Charger
Magnum
Magnum
Magnum
Magnum
Magnum
Magnum
Trim
Base
Base
Base
Base
C
C
C
C
C
C
C
C
C
C
C
C Luxury
C Luxury
C Luxury
C Platinum
C Platinum
C Platinum
C Platinum
C SRT8
C SRT8
C SRT8
LX
LX
Limited
Limited
Limited
Limited
Limited
Limited
Limited
S
S
S
S
S
S
S
S
S
S
S
S
SRT8
SRT8
SRT8 Core
Signature Series
Touring
Touring
Touring
Touring
Touring
Touring
Touring L
Touring L
392 Hemi Scat Pack Shaker
GT
GT
GT
GT
GT
GT
R/T
R/T
R/T
R/T
R/T
R/T
R/T
R/T
R/T
R/T
R/T 392
R/T 392
R/T 392
R/T Classic
R/T Plus
R/T Plus Shaker
R/T Scat Pack
R/T Scat Pack
R/T Scat Pack
R/T Scat Pack
R/T Scat Pack
R/T Scat Pack
R/T Scat Pack Shaker Widebody
R/T Scat Pack Widebody
R/T Scat Pack Widebody
R/T Scat Pack Widebody
R/T Scat Pack Widebody
R/T Shaker
Rallye Redline
SE
SE
SRT 392
SRT 392
SRT Demon
SRT Demon 170
SRT Hellcat
SRT Hellcat
SRT Hellcat
SRT Hellcat
SRT Hellcat
SRT Hellcat Jailbreak
SRT Hellcat Redeye
SRT Hellcat Redeye
SRT Hellcat Redeye
SRT Hellcat Redeye Jailbreak
SRT Hellcat Redeye Widebody
SRT Hellcat Redeye Widebody
SRT Hellcat Redeye Widebody
SRT Hellcat Redeye Widebody Jailbreak
SRT Hellcat Widebody
SRT Hellcat Widebody
SRT Hellcat Widebody
SRT Hellcat Widebody
SRT Hellcat Widebody Jailbreak
SRT Jailbreak
SRT Super Stock
SRT Super Stock
SRT Super Stock
SRT8
SRT8
SRT8
SRT8
SRT8
SXT
SXT
SXT
SXT
SXT
SXT
SXT
SXT
SXT Plus
SXT Plus
SXT Plus
Scat Pack
T/A
T/A
T/A 392
T/A 392
T/A 392 Widebody
Base
Base
Base
Base
Daytona
Daytona 392
Daytona R/T
GT
GT
GT
GT Plus
Pursuit
Pursuit
Pursuit
Pursuit
Pursuit
Pursuit
Pursuit
Pursuit
Pursuit
Pursuit
Pursuit
Pursuit
Pursuit
Pursuit
Pursuit
Pursuit
Pursuit
Pursuit
Pursuit
Pursuit
Pursuit
R/T
R/T
R/T
R/T
R/T
R/T
R/T
R/T
R/T
R/T
R/T 392
R/T Road & Track
R/T Road & Track
R/T Scat Pack
R/T Scat Pack
SE
SE
SE
SE
SE
SE
SE
SE
SE
SE
SE
SE
SE
SE
SE
SE
SRT 392
SRT 392
SRT Hellcat
SRT Hellcat
SRT Hellcat
SRT Hellcat Redeye Widebody
SRT Hellcat Redeye Widebody
SRT Hellcat Redeye Widebody Jailbreak
SRT Hellcat Widebody
SRT Hellcat Widebody
SRT Hellcat Widebody Jailbreak
SRT Jailbreak
SRT8
SRT8
SRT8
SRT8
SRT8
SRT8
SXT
SXT
SXT
SXT
SXT
SXT
SXT
SXT
SXT
SXT
SXT Plus
SXT Plus
SXT Plus Leather
Scat Pack
Scat Pack
Scat Pack 392 Widebody
Scat Pack Widebody
Scat Pack Widebody
R/T
SE
SE
SRT8
SXT
SXT Special Edition
Engine
2.7L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
6.4L V8
3.6L V6
5.7L V8
5.7L V8
3.6L V6
3.6L V6
5.7L V8
5.7L V8
6.1L V8
6.1L V8
6.1L V8
2.7L V6
2.7L V6
3.5L V6
3.5L V6
3.5L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.5L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
6.4L V8
6.4L V8
6.4L V8
3.5L V6
2.7L V6
3.5L V6
3.5L V6
3.5L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
6.4L V8
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
6.4L V8
6.4L V8
6.4L V8
5.7L V8
5.7L V8
5.7L V8
6.4L V8
6.4L V8
6.4L V8
6.4L V8
6.4L V8
6.4L V8
6.4L V8
6.4L V8
6.4L V8
6.4L V8
6.4L V8
5.7L V8
3.6L V6
3.5L V6
3.6L V6
6.4L V8
6.4L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.1L V8
6.1L V8
6.4L V8
6.4L V8
6.4L V8
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
6.4L V8
5.7L V8
5.7L V8
6.4L V8
6.4L V8
6.4L V8
2.7L V6
2.7L V6
3.5L V6
3.5L V6
5.7L V8
6.4L V8
5.7L V8
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.5L V6
3.5L V6
3.5L V6
3.5L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
5.7L V8
6.4L V8
5.7L V8
5.7L V8
6.4L V8
6.4L V8
2.7L V6
2.7L V6
2.7L V6
3.5L V6
3.5L V6
3.5L V6
3.5L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
5.7L V8
5.7L V8
5.7L V8
5.7L V8
6.4L V8
6.4L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.2L V8
6.1L V8
6.1L V8
6.1L V8
6.1L V8
6.4L V8
6.4L V8
3.5L V6
3.5L V6
3.5L V6
3.5L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
3.6L V6
6.4L V8
6.4L V8
6.4L V8
6.4L V8
6.4L V8
5.7L V8
2.7L V6
3.5L V6
6.1L V8
3.5L V6
3.5L V6
Note
(2) 5115-5115H-AA 6061 Billet 2 and 4 Pack Front;AWD;Rear
Measure and confirm the bolt pattern, center bore, thread size and spacer thickness before purchasing.
Check the stock stud length. Extended studs may be required if the original studs are too short.
Confirm adequate wheel-to-fender clearance.
Test-fit the spacer. It must sit completely flush against the hub or brake rotor with no gap.
Installation Steps
Step-1: Clean the Mounting Surfaces:Remove all rust, dirt, oil and grease from the hub, studs and mounting surfaces.
Step-2: Install the Inner Plate:Position the inner plate flush against the hub. Install the open-end lug nuts with the tapered ends facing the spacer.
Step-3: Check Stud Clearance:Make sure the nuts sit flush inside the inner plate. If the stock studs interfere with the adapter or wheel, shorten or replace them as required.
Step-4: Install the Outer Plate:Apply thread locker to the first 5–6 threads of the connecting bolts. Install the outer plate and torque the bolts to 50–55 ft-lb (68–75 N·m).
Step-5: Install the Wheel:Start all lug nuts by hand and tighten them evenly in a crisscross pattern with a torque wrench. Do not use an impact wrench.
After Installation
Confirm that the spacer, adapter and wheel sit completely flush with no gaps or interference.
Check that all fasteners are secure and the wheel rotates freely.
Recheck the adapter nuts and bolts after the first 50–100 miles.
Recheck and retorque every 3,000–5,000 miles.
Product Video
Product Description
Reviews
4.8/5
Based on 108 reviews
5
82%
4
18%
3
0%
2
0%
1
0%
Customer photos and videos
S
Shopaholic
04/18/2026
Verified buyer
I’ll be honest—these are definitely more of a “muscle car” vibe. If I had a Charger or Mustang, I’d probably already have them on my front fenders. Since I don’t, I mocked them up on my RAV4 just to see how they’d look (and for fun), and they actually give off a pretty cool effect. Each claw mark is a nice size—mine measured roughly 12.5" to 16.25" long and just over an inch at the widest point. They’re big enough to be noticeable without looking over-the-top. The vinyl itself looks and feels like standard automotive decal material. I checked the tip of one of the claws and it’s thin and flexible without feeling cheap, which is a good sign for conforming to curved surfaces. I didn’t permanently apply them, but based on handling and the adhesive backing, installation looks straightforward: clean surface, peel, stick, and smooth out. I could see someone taking their time to line these up and get a really clean result, especially on a curved panel. These would work well for: Adding an aggressive/custom look Covering small scratches or imperfections Accent placement on fenders, doors, or quarter panels Overall, if this style fits your vehicle, these seem like a solid option. Just know the look is pretty bold—on the right car, it’ll look great.
G
Gene Santos II
03/06/2026
Verified buyer
My wife and I opted to get new engine splash shields for a few of our older vehicles as we live in the Northeast with alot snow and salt in the winters. It can wreak havoc on your cars underbody. This was for our 2004 Audi a4 1.8T I expected a fairly large piece as it is a shield, but the box was ginormous, yep theres no missing that one! But as always with PHILTOP, quality is always top knotch and the box is heavy duty to protect its valuable contents. I must say I was thoroughly impressed with the build quality of the splash shield, thick and durable, made to withstand the elements and keep all of the crud out of your engine and under carriage. This turned out to be a fairly quick install. My buddy has a garage with some lifts, so took this and 1 other car down there to have him assist with locking and securing everything down, which he did a phenomenal job at. Now with both vehicles, we can have peace mind driving these long distances facing the elements, all thanks to PHILTOP, Highly recommend!
FAQS
This depends on spacer type and thickness. Slip-on spacers may require sufficient additional thread engagement, while bolt-on designs may include separate hardware. Follow the product and vehicle requirements.
Stacking spacers is generally not recommended because it may affect seating and fastener engagement. Select a single spacer of the appropriate specification instead.
Warranty coverage and duration may vary by product. For specific warranty period details by product category, please refer to our Warranty & Returns Policy page. Damage related to incorrect fitment, installation or other vehicle problems may require further review.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
2006-2023 Dodge Charger 2.7L | 5x4.53 inch 71.5mm Center Bore M14x1.5 Thread Wheel Hub Accessory - PHILTOP
Durable
6061T6
12.9-Grade Bolts
SKU:
51ISWSA5567US
4.8
$51.99$5199
Check if this fits your vehicle
Select a vehicle to check this product.
Bolt Pattern
5x115mm
Wheel Bolt Pattern
5x115mm
Vehicle Bolt Pattern
5x115mm
Thread Size
M14x1.5
Center Bore
71.5
Hub-Centric Lip
Yes
Thickness
20mm
Outside Diameter
150
[Wheel Spacers Specification] --- Bolt Pattern: 5x115mm ; | Thickness: 20mm ; | Thread Pitch: M14x1.5 ; | Hub Bore: 71.5mm ; | Recommended torque: 85-90 ft/lbs. !!! Note: If the length of the vehicle bolts exceed the thickness of the wheel adapters, you need to cut the vehicle bolts
[High Quality] ---5x115 Wheel Spacer is truly forged from lightweight anodized 6061-T6 aircraft-grade aluminum alloy, the surface anodized coating can protect the metal surface from environmental erosion under extreme conditions. CNC precisely machined, with pre-installed heat treated 12.9 grade carbon steel studs, 7-10 times the corrosion resistance of similar products. The installation fit more better, so as to prevent wheel vibration and maintain the stock driving
[Aggressive Driving Experience] --- These 5x115 Wheel Spacers can move your wheels further out from the wheel hub, allow for larger tire installation to the vehicle. Installing the wheel spacers can fix brake caliper clearance issues, correct tire friction issues, increase cornering stability, give your vehicle a more aggressive stance
[Professional Services] --- Before placing an order, confirm compatibility by entering the year, make, and model in the PhiltopAuto suitability filter in the upper left corner. --- IMPORTANT SAFETY ADVISORY --- : Torque lug bolts/nuts to manufacturer specifications. Check and re-torque all hardware after 25-50 miles. See Product Description for additional install information
4.8
108 reviews
5 star: 89
4 star: 19
Compatible Vehicles
Check if this fits your vehicle
Year
Make
Model
Trim
Engine
Notes
2005 - 2007
Chrysler
300
Base
2.7L V6
(2) 5115-5115H-AA 6061 Billet 2 and 4 Pack Front;AWD;Rear
Measure and confirm the bolt pattern, center bore, thread size and spacer thickness before purchasing.
Check the stock stud length. Extended studs may be required if the original studs are too short.
Confirm adequate wheel-to-fender clearance.
Test-fit the spacer. It must sit completely flush against the hub or brake rotor with no gap.
Installation Steps
Step-1: Clean the Mounting Surfaces:Remove all rust, dirt, oil and grease from the hub, studs and mounting surfaces.
Step-2: Install the Inner Plate:Position the inner plate flush against the hub. Install the open-end lug nuts with the tapered ends facing the spacer.
Step-3: Check Stud Clearance:Make sure the nuts sit flush inside the inner plate. If the stock studs interfere with the adapter or wheel, shorten or replace them as required.
Step-4: Install the Outer Plate:Apply thread locker to the first 5–6 threads of the connecting bolts. Install the outer plate and torque the bolts to 50–55 ft-lb (68–75 N·m).
Step-5: Install the Wheel:Start all lug nuts by hand and tighten them evenly in a crisscross pattern with a torque wrench. Do not use an impact wrench.
After Installation
Confirm that the spacer, adapter and wheel sit completely flush with no gaps or interference.
Check that all fasteners are secure and the wheel rotates freely.
Recheck the adapter nuts and bolts after the first 50–100 miles.
Recheck and retorque every 3,000–5,000 miles.
Product Video
Product Description
Reviews
4.8/5
Based on 108 reviews
5
82%
4
18%
3
0%
2
0%
1
0%
Customer photos and videos
S
Shopaholic
Apr 18,2026
Verified buyer
I’ll be honest—these are definitely more of a “muscle car” vibe. If I had a Charger or Mustang, I’d probably already have them on my front fenders. Since I don’t, I mocked them up on my RAV4 just to see how they’d look (and for fun), and they actually give off a pretty cool effect. Each claw mark is a nice size—mine measured roughly 12.5" to 16.25" long and just over an inch at the widest point. They’re big enough to be noticeable without looking over-the-top. The vinyl itself looks and feels like standard automotive decal material. I checked the tip of one of the claws and it’s thin and flexible without feeling cheap, which is a good sign for conforming to curved surfaces. I didn’t permanently apply them, but based on handling and the adhesive backing, installation looks straightforward: clean surface, peel, stick, and smooth out. I could see someone taking their time to line these up and get a really clean result, especially on a curved panel. These would work well for: Adding an aggressive/custom look Covering small scratches or imperfections Accent placement on fenders, doors, or quarter panels Overall, if this style fits your vehicle, these seem like a solid option. Just know the look is pretty bold—on the right car, it’ll look great.
G
Gene Santos II
Mar 06,2026
Verified buyer
My wife and I opted to get new engine splash shields for a few of our older vehicles as we live in the Northeast with alot snow and salt in the winters. It can wreak havoc on your cars underbody. This was for our 2004 Audi a4 1.8T I expected a fairly large piece as it is a shield, but the box was ginormous, yep theres no missing that one! But as always with PHILTOP, quality is always top knotch and the box is heavy duty to protect its valuable contents. I must say I was thoroughly impressed with the build quality of the splash shield, thick and durable, made to withstand the elements and keep all of the crud out of your engine and under carriage. This turned out to be a fairly quick install. My buddy has a garage with some lifts, so took this and 1 other car down there to have him assist with locking and securing everything down, which he did a phenomenal job at. Now with both vehicles, we can have peace mind driving these long distances facing the elements, all thanks to PHILTOP, Highly recommend!
FAQS
This depends on spacer type and thickness. Slip-on spacers may require sufficient additional thread engagement, while bolt-on designs may include separate hardware. Follow the product and vehicle requirements.
Stacking spacers is generally not recommended because it may affect seating and fastener engagement. Select a single spacer of the appropriate specification instead.
Warranty coverage and duration may vary by product. For specific warranty period details by product category, please refer to our Warranty & Returns Policy page. Damage related to incorrect fitment, installation or other vehicle problems may require further review.