2005-2009 Subaru Outback 3.0L H6 | Power Steering Pump | 21188 - PHILTOP

2005-2009 Subaru Outback 3.0L H6 | Power Steering Pump | 21188 - PHILTOP

Complete Parts Range

Leak-Tested

Durable

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
2670PSP250KUS

Specifications

Brand
PHILTOP
Pulley Included
Yes
Reservoir Included
No
Pulley Attachment Type
Press-on
Outlet Connection Type
Threaded
Outlet Thread Size
14x1.5 in
Inlet Connection Type
Hose Barb
Drive Type
Engine
Material
Aluminium/Iron
Items Included
1x Power Steering Pump - 21188, 1x Manual
Warranty Period
2-Year
Part Number
21188

Highlights

  • Fitment: 2005 2006 2007 2008 2009 Outback 3.0L,2008-2009 Legacy 3.0L
  • Improve Steering: 21-188、34430AG011、34430AG0119L, Condition: Brand New (Not Remanufactured); Pulley Included: Yes, Reservoir Included: No, Inlet Attachement Type:Hose Barb, Outlet Attachment Type: Threaded, Pulley attachment types: Press-on, Outlet inner diameter size: 14x1.5
  • Quiet Operation: Our power steering pump is designed to operate quietly, providing a smooth and comfortable driving experience.
  • Durable Design: Our power steering pump is built to last, with high-quality Reliable and Durables and expert craftsmanship.
  • Comfortable Experiences: Makes it easier and more stable for drivers to maneuver when they are more at ease. This significantly lessens tired driving

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20092008 - 200920092005 - 20062005 - 200820062005
MakeSubaruSubaruSubaruSubaruSubaruSubaruSubaru
ModelLegacyLegacyOutbackOutbackOutbackOutbackOutback
Trim3.0 R3.0 R Limited3.0 R LimitedRR L.L. Bean EditionR VDC LimitedVDC Limited
Engine3.0L H63.0L H63.0L H63.0L H63.0L H63.0L H63.0L H6
Note
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0550-Power steering pressure sensor circuit — inspect the sensor connector and wiring.
  • P0551–P0553-Pressure sensor circuit range/performance or low/high input — check pressure, sensor signals, and wiring.
  • P0620-Generator control circuit — check the charging system and related wiring.
  • P0562-Low system voltage — check the battery, charging output, and power connections.

Codes alone do not confirm power steering pump failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Confirm fitment: Compare mounting points, pulley specifications, fluid ports, and any sensor connectors.
  • Inspect the system: Check fluid condition, hoses, seals, and the drive belt for leaks or damage.
  • Check the new pump: Inspect for shipping damage and confirm smooth pulley rotation where applicable.

Installation Steps

  • STEP 1 — Let the engine cool, disconnect the negative battery cable, and drain the power steering fluid.
  • STEP 2 — Photograph the belt routing and hose connections. Release belt tension and remove the belt from the pump.
  • STEP 3 — Disconnect hoses and any wiring. Cap open lines to keep out dirt, then remove the old pump.
  • STEP 4 — Clean or flush contaminated lines. Install the new pump with new specified seals and tighten fasteners to vehicle specifications.
  • STEP 5 — Reconnect hoses and wiring. Reinstall the belt with correct alignment and tension.
  • STEP 6 — Fill with the specified fluid and bleed the system using the vehicle-specific procedure. Never run the pump dry or hold the steering at full lock.

After Installation

  • Verify correct belt seating and secure hose connections.
  • With the engine idling, check for smooth steering assist without unusual noise or vibration.
  • Inspect the pump and lines for leaks.
  • Switch off the engine, allow the fluid to settle, and recheck the level.

Product Video

Product Description

1steering4PSP2500

Reviews

4.6/5

Based on 8 reviews

575%
413%
313%
20%
10%

Silvio londoño

03/24/2026

Verified buyer

Funcionó perfectamente en una outback 2007 3,0 spec b

Cortney Honeyman

08/21/2024

Verified buyer

Fit and worked perfectly, not much more you can say

FAQS

Please take the time to carefully verify if your vehicle is compatible with our offering.Please under the guidance of professionals, ensure a smooth and expert installation process. (Instructions not included)

Mismatched high-pressure interface size, aging of sealing ring or gasket. The low-pressure pipe is damaged or loosened: Check whether the oil pipe is loose after tightening the bolts, and whether the gasket or seal is deformed.

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.