2006-2012 Kia Sedona 3.8L V6 | Power Steering Pump | 215180 - PHILTOP

2006-2012 Kia Sedona 3.8L V6 | Power Steering Pump | 215180 - PHILTOP

Complete Parts Range

Leak-Tested

Durable

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3002PSP2376US

Specifications

Brand
PHILTOP
Pulley Included
Yes
Reservoir Included
No
Pulley Attachment Type
Bolt-on
Outlet Connection Type
Threaded
Outlet Thread Size
16X1.5 in
Inlet Connection Type
Hose Barb
Drive Type
Engine
Material
Aluminium/Iron
Items Included
1x Power Steering Pump - 215180, 1x Manual
Warranty Period
2-Year
Part Number
215180

Highlights

  • (FITMENT)2006 2007 2008 2009 2010 2011 2012 2013 2014 Sedona,2007-2009 Entourage
  • (OEM FIT)21-5180、571104D200, Condition: Brand New (Not Remanufactured); Pulley Included: Yes, Reservoir Included: No, Inlet Attachement Type:Hose Barb, Outlet Attachment Type: Threaded, Pulley attachment types: Bolt-on, Outlet inner diameter size: 16X1.5
  • (IMPROVE STEERING)2006 2007 2008 sedona power steering pump can assist drivers in adjusting the direction of their vehicle, lowering the amount of power required to move the steering wheel and making drivers safer on the road. When you notice that your vehicle's wheels are not running smoothly, the steering wheel spins slowly or even stiffly, or the steering system makes a loud noise.
  • (QUIET OPERATION)Removes operating-related steering noise and improves the body's steering performance. provides more comfortable steering for drivers while they are on the road.
  • (COMFORTABLE EXPERIENCES)Makes entourage power steering pump easier and more stable for drivers to maneuver when they are more at ease. This significantly lessens tired driving.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2007 - 20082007 - 200820072007 - 20102011 - 201220142006 - 20102011 - 201220142006 - 2010
MakeHyundaiHyundaiHyundaiKiaKiaKiaKiaKiaKiaKia
ModelEntourageEntourageEntourageSedonaSedonaSedonaSedonaSedonaSedonaSedona
TrimGLSLimitedSEBaseEXEXEXLXLXLX
Engine3.8L V63.8L V63.8L V63.8L V63.5L V63.5L V63.8L V63.5L V63.5L V63.8L V6
Note
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
-
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
-
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0550-Power steering pressure sensor circuit — inspect the sensor connector and wiring.
  • P0551–P0553-Pressure sensor circuit range/performance or low/high input — check pressure, sensor signals, and wiring.
  • P0620-Generator control circuit — check the charging system and related wiring.
  • P0562-Low system voltage — check the battery, charging output, and power connections.

Codes alone do not confirm power steering pump failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Confirm fitment: Compare mounting points, pulley specifications, fluid ports, and any sensor connectors.
  • Inspect the system: Check fluid condition, hoses, seals, and the drive belt for leaks or damage.
  • Check the new pump: Inspect for shipping damage and confirm smooth pulley rotation where applicable.

Installation Steps

  • STEP 1 — Let the engine cool, disconnect the negative battery cable, and drain the power steering fluid.
  • STEP 2 — Photograph the belt routing and hose connections. Release belt tension and remove the belt from the pump.
  • STEP 3 — Disconnect hoses and any wiring. Cap open lines to keep out dirt, then remove the old pump.
  • STEP 4 — Clean or flush contaminated lines. Install the new pump with new specified seals and tighten fasteners to vehicle specifications.
  • STEP 5 — Reconnect hoses and wiring. Reinstall the belt with correct alignment and tension.
  • STEP 6 — Fill with the specified fluid and bleed the system using the vehicle-specific procedure. Never run the pump dry or hold the steering at full lock.

After Installation

  • Verify correct belt seating and secure hose connections.
  • With the engine idling, check for smooth steering assist without unusual noise or vibration.
  • Inspect the pump and lines for leaks.
  • Switch off the engine, allow the fluid to settle, and recheck the level.

Product Video

Product Description

1steering4PSP2370

Reviews

4.7/5

Based on 7 reviews

571%
429%
30%
20%
10%

Joshua

05/06/2025

Verified buyer

I was surprised at the quality of this pump. Looks like oem. It was easy to install, for me;) a ratchet wrench on that upper bolt, that goes from inside out, will save you a bunch of time.Pump works great. No leaks, no noise.

Francisco J. Mojica Sotomayor

02/22/2025

Verified buyer

Muy buena 👌

FAQS

Please take the time to carefully verify if your vehicle is compatible with our offering.Please under the guidance of professionals, ensure a smooth and expert installation process. (Instructions not included)

Mismatched high-pressure interface size, aging of sealing ring or gasket. The low-pressure pipe is damaged or loosened: Check whether the oil pipe is loose after tightening the bolts, and whether the gasket or seal is deformed.

Check the package contents listed on the product page. If an included item is missing, contact us with your order number and photos of everything received.