2001-2007 Toyota Highlander 2.4L L4 | Power Steering Pump | 215364 - PHILTOP

2001-2007 Toyota Highlander 2.4L L4 | Power Steering Pump | 215364 - PHILTOP

Complete Parts Range

Leak-Tested

Durable

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
2221PSP258EUS

Specifications

Brand
PHILTOP
Pulley Included
Yes
Reservoir Included
No
Pulley Attachment Type
Press-on
Outlet Connection Type
Threaded
Outlet Thread Size
16X1.5 in
Inlet Connection Type
Hose Barb
Drive Type
Engine
Material
Aluminium/Iron
Items Included
1x Power Steering Pump - 215364, 1x Manual
Warranty Period
2-Year
Part Number
215364

Highlights

  • (Vehicle Fitment)2001 2002 2003 2004 2005 2006 2007 Highlander 2.4L
  • (OE Replacement)21-5364、4431048050、4431048030, Condition: Brand New (Not Remanufactured); Pulley Included: Yes, Reservoir Included: No, Inlet Attachement Type:Hose Barb, Outlet Attachment Type: Threaded, Pulley attachment types: Press-on, Outlet inner diameter size: 16X1.5
  • (Reliable and Durable)The Power Steering Pump adopts advanced CNC machining technology, with strict tolerance control of each component and high assembly accuracy. It also adopts high-quality seals and lubrication system design to effectively prevent oil leakage and wear. Product performance indicators meet or exceed industry standards
  • (Excellent Quality)The Power Steering Pump is mainly made of high-strength aluminum alloy or iron and other high-quality metal materials, with excellent corrosion resistance and service life; the internal key components are made of high-quality engineering plastics, and undergo strict material selection and processing technology to ensure a higher reliability
  • (Professional After-sales)Before placing the order,please check your car model in the Suncentauto Fitment Filter System in the top left corner,Do not count on year make and model only,view compatability tab including the notes.Any problem please free to contact us and you will get a satisfactory solution

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2001 - 2007
MakeToyota
ModelHighlander
TrimBase
Engine2.4L L4
Note
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0550-Power steering pressure sensor circuit — inspect the sensor connector and wiring.
  • P0551–P0553-Pressure sensor circuit range/performance or low/high input — check pressure, sensor signals, and wiring.
  • P0620-Generator control circuit — check the charging system and related wiring.
  • P0562-Low system voltage — check the battery, charging output, and power connections.

Codes alone do not confirm power steering pump failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Confirm fitment: Compare mounting points, pulley specifications, fluid ports, and any sensor connectors.
  • Inspect the system: Check fluid condition, hoses, seals, and the drive belt for leaks or damage.
  • Check the new pump: Inspect for shipping damage and confirm smooth pulley rotation where applicable.

Installation Steps

  • STEP 1 — Let the engine cool, disconnect the negative battery cable, and drain the power steering fluid.
  • STEP 2 — Photograph the belt routing and hose connections. Release belt tension and remove the belt from the pump.
  • STEP 3 — Disconnect hoses and any wiring. Cap open lines to keep out dirt, then remove the old pump.
  • STEP 4 — Clean or flush contaminated lines. Install the new pump with new specified seals and tighten fasteners to vehicle specifications.
  • STEP 5 — Reconnect hoses and wiring. Reinstall the belt with correct alignment and tension.
  • STEP 6 — Fill with the specified fluid and bleed the system using the vehicle-specific procedure. Never run the pump dry or hold the steering at full lock.

After Installation

  • Verify correct belt seating and secure hose connections.
  • With the engine idling, check for smooth steering assist without unusual noise or vibration.
  • Inspect the pump and lines for leaks.
  • Switch off the engine, allow the fluid to settle, and recheck the level.

Product Video

Product Description

1steering4PSP2580

Reviews

4.7/5

Based on 6 reviews

567%
433%
30%
20%
10%

kprice

05/15/2024

Verified buyer

Works great and a perfect fit

Bernard J. Kuprionas

06/18/2023

Verified buyer

Changed the power steering pump on an 05 Toyota Highlander 2.4 liter.Did notice that this pump was markedly lighter than the factory original I replaced with this pump, but overall fit was perfect.The job itself was no picnic but I was very happy that any troubles I had during the change out were not due to this part in any way or form.Very pleased on this part and that it was manufactured to fit the application it was built for.

FAQS

Mismatched high-pressure interface size, aging of sealing ring or gasket. The low-pressure pipe is damaged or loosened: Check whether the oil pipe is loose after tightening the bolts, and whether the gasket or seal is deformed.

1. The long storage time causes the vanes to be stuck by oil: Check for oil fluctuations in oil tank. 2. Faults of tie rods, ball cages, tires, steering gear: Check the relevant parts

Check the package contents listed on the product page. If an included item is missing, contact us with your order number and photos of everything received.