PHILTOP 2pcs 2-4" Lift Front Upper Control Arm for Tacoma 2005-2021 Suspension Kit

PHILTOP 2pcs 2-4" Lift Front Upper Control Arm for Tacoma 2005-2021 Suspension Kit

Corrosion Resistant

Deformation Resistant

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7026CAK200XUS

Specifications

Brand
PHILTOP
Items Included
2x 2-4" Lift Upper Control Arms
Quantity
2
Position
Front Upper
Surface Finish
Polished, Rust Protected
Material
Steel
Warranty Period
2-Year

Highlights

  • #65,321 in Automotive (See Top 100 in Automotive)
  • #145 in Automotive Replacement Control Arms
  • Fitment: PHILTOP Control Arms Lower Ball Joints Sway Bars Tie Rods for Tacoma 2005-2021.
  • Package Contents: 2X Front Control Arms. FZ0651106 suspension kit.
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life. All materials used for the control arm coating are environmentally friendly.
  • Simple Installation: Our control arms meet production standards and are dimensionally accurate. This makes installation simple and requires no additional action.
  • Fit Verification: Before purchasing, confirm that the control arm is appropriate for your vehicle. If you have any problems with the suspension kit, please feel free to contact us.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20042004 - 201520042005 - 20152016 - 20222004 - 201520042005 - 201520042016 - 20232016 - 20222016 - 20222016 - 20222016 - 20222017 - 202220152016 - 202220212005 - 201320042005 - 2013
MakeToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTundraTundra
TrimBaseBaseBaseBaseLimitedPre RunnerPre RunnerPre RunnerS-RunnerSRSRSR5SR5TRD Off-RoadTRD ProTRD ProTRD SportTrailX-RunnerBaseBase
Engine2.4L L42.7L L43.4L V64.0L V63.5L V62.7L L43.4L V64.0L V63.4L V62.7L L43.5L V62.7L L43.5L V63.5L V63.5L V64.0L V63.5L V63.5L V64.0L V63.4L V64.0L V6
Note---------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.7/5

Based on 3 reviews

567%
433%
30%
20%
10%

Ashley_RoadTrip_112

10/18/2025

My Tacoma was riding a bit rough, but these control arms smoothed out the ride considerably. Feels much more planted on the highway now.

Mike from Texas_599

03/22/2026

These control arms are built tough! They look really well-made with solid welds. Definitely a great upgrade for the price.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.