PHILTOP 2pcs Control Arms Replacement for Honda CR-V 2002-2006, Element 2003-2011,2 Rear Driver and Passenger Upper Control Arm

PHILTOP 2pcs Control Arms Replacement for Honda CR-V 2002-2006, Element 2003-2011,2 Rear Driver and Passenger Upper Control Arm

Corrosion Resistant

Deformation Resistant

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8327CAK059ZUS

Specifications

Brand
PHILTOP
Items Included
2x Rear Upper Control Arm - Driver and Passenger Side - K90489
Quantity
2
Position
Rear Upper
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
Part Number
RK90489

Highlights

  • #63,784 in Automotive (See Top 100 in Automotive)
  • #138 in Automotive Replacement Control Arms
  • Fitment: PHILTOP Control Arms Lower Ball Joints Sway Bars Tie Rods for CR-V 2002-2006, Element 2003-2011
  • Kit Includes: 2 x K90489 Rear Upper Control Arm - Driver and Passenger Side
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • Easy Installation: Precision tolerances for easy installation on all parts. Control arm has steering alignment that ensure you a perfect work
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2002 - 20062002 - 20062005 - 20062003 - 20042003 - 20112004 - 20112007 - 2010
MakeHondaHondaHondaHondaHondaHondaHonda
ModelCR-VCR-VCR-VElementElementElementElement
TrimEXLXSEDXEXLXSC
Engine2.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L4
Note
Minus 2 Degree To Plus 4 Degree Camber
Minus 2 Degree To Plus 4 Degree Camber
Minus 2 Degree To Plus 4 Degree Camber
Minus 2 Degree To Plus 4 Degree Camber
Minus 2 Degree To Plus 4 Degree Camber
Minus 2 Degree To Plus 4 Degree Camber
Minus 2 Degree To Plus 4 Degree Camber

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.7/5

Based on 7 reviews

571%
429%
30%
20%
10%

Steve_DIYer_269

04/20/2026

My Element was feeling really loose in the front end, especially on turns. These control arms totally transformed the handling. It feels stable and secure now. Big difference.

Kelly_SUV_Life_929

02/16/2026

These control arms are beefy and look like they're built to last. For the price, you're getting some seriously good quality here. A smart buy if you need replacements.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.