PHILTOP 2Pcs Front Upper Control Arms Fit for YFZ450, YFM700R Raptor, YFM700 Raptor, YFM700R Raptor SE, YXR700F Rhino 700 FI Spe

PHILTOP 2Pcs Front Upper Control Arms Fit for YFZ450, YFM700R Raptor, YFM700 Raptor, YFM700R Raptor SE, YXR700F Rhino 700 FI Spe

Corrosion Resistant

Deformation Resistant

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
4098CAK224AUS

Specifications

Brand
PHILTOP
Items Included
2x Front Upper Control Arms
Quantity
2
Position
Front Upper
Surface Finish
Polished, Rust Protected
Material
Steel
Warranty Period
2-Year
OE Number
5TG-23540-00-00,5TG-23540-02-00,2LS-F3540-00-00

Highlights

  • #64,652 in Automotive (See Top 100 in Automotive)
  • #144 in Automotive Replacement Control Arms
  • Fitment: PHILTOP control arms compatible with YFZ450 2004-2009 2012-2013, YFM700R Raptor 2006-2008 2014-2021, YFM700 Raptor 2013 2015-2023, YFM700R Raptor SE 2015-2021, YXR700F Rhino 700 FI Special Edition 2008-2012, YFM700R Raptor GYTR Edition 2007, YXR66F Rhino 660 Special Edition 2006, YFZ450 Bill Balance Edition 2006. Please check fitment for accurate information before purchasing
  • Kit Includes: 1 x Upper Front Left/Front Right A-arm
  • Strictly Tested: All control arm components undergo a variety of rigorous tests at the factory, including aging, durability, and hardness tests. PHILTOP's control arm kits meet the stringent requirements of most cars, trucks, and SUVs.
  • Easy Installation: Precision tolerances for easy installation on all parts. Control arm has steering alignment that ensure you a perfect work
  • Durable Design: PHILTOP Control Arms are made of high quality material which meets or exceeds OEM standard. They ensure long - lasting performance, reducing the need for frequent replacements. This not only saves you money on maintenance costs but also provides peace of mind, knowing your vehicle's handling and safety are supported by reliable, enduring components

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20132015 - 20232006 - 20082014 - 202120072015 - 20212004 - 20092012 - 2013200620062008 - 2012
MakeYamahaYamahaYamahaYamahaYamahaYamahaYamahaYamahaYamahaYamahaYamaha
ModelYFM700 RaptorYFM700 RaptorYFM700R RaptorYFM700R RaptorYFM700R Raptor GYTR EditionYFM700R Raptor SEYFZ450YFZ450YFZ450 Bill Balance EditionYXR66F Rhino 660 Special EditionYXR700F Rhino 700 FI Special Edition
TrimBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBase
Engine-----------
Note-----------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.4/5

Based on 7 reviews

557%
429%
314%
20%
10%

CarGuy_John_63

10/04/2025

Super speedy delivery! Got these installed on my Rhino 700 in no time. Everything fit like a glove, and it was a pretty straightforward job. Very pleased.

Jason_Trucks_69

03/27/2026

These control arms are awesome for the price. They're built really well and have a nice finish. Totally worth it if you're looking for a good deal on parts for your Raptor.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.