2005-2010 Volvo S40 2.5L L5 | 2 PC Rear AWD Wheel Bearing | 312770456/512412 - PHILTOP

2005-2010 Volvo S40 2.5L L5 | 2 PC Rear AWD Wheel Bearing | 312770456/512412 - PHILTOP

Triple-Lip Seal

Rear

AWD

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
9956WBK417RUS

Specifications

Brand
PHILTOP
Drive Type
AWD
Lug Count
5
Position
Rear
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Rear Wheel Hub and Bearing Assembly - 512412,Installation Instructions
Bolt Pattern
5x4.4
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.3 in
Flange Offset
2.48 in/63 mm
Flange Diameter
5.35 in/136.0 mm
Brake Pilot Diameter
2.5 in/63.5 mm
Warranty Period
2-Year
OE Number
312770456,31212699,307145580,30714558,30683178,307145581,312770450,312126998,312126990,31277045,4N512C299NAD
Part Number
512412,HA590321,WE61490,7900001,40039010E,40039010,H512412,WA512412,BR930705,0516400,712412,WH512412,733412,4003901,805653C,1411255770,0516335,NT512412,PT512412
Quantity
2

Highlights

  • [Fitment] Wheel Bearing and Hub Assemblies compatible with 2005-2010 Volvo S40 AWD, 2005-2010 Volvo V50 AWD
  • [OE Number] 512412, HA590321, 312770456, WA512412, BR930705, 31212699, 30714558, 307145580, 30683178, 307145581, 31277045, 312126998, 312770450
  • [Premium Materials] The outer ring and flange are made of high-quality #55 carbon structural steel for superior hardness and strength; the inner ring is crafted from GCr15 bearing steel, which achieves uniform hardness after quenching and tempering for excellent wear resistance and fatigue strength.
  • [Long Life, Stable Drive] Our brand-new hub assemblies and studs are finished with rust-proof coating for longer service life. Featuring a triple oil seal structure, they effectively block moisture and dust, while minimizing noise and vibration to deliver a smoother, more comfortable drive.
  • [Pro Installation for Safety] If you lack installation instructions or professional experience, have a qualified mechanic install the bearing to guarantee optimal performance and safe driving.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2005 - 200920102005 - 20092010
MakeVolvoVolvoVolvoVolvo
ModelS40S40V50V50
TrimT5T5 R-DesignT5T5 R-Design
Engine2.5L L52.5L L52.5L L52.5L L5
Note
All-Wheel Drive
All-Wheel Drive
All-Wheel Drive
All-Wheel Drive

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.5/5

Based on 2 reviews

550%
450%
30%
20%
10%

Lisa_CivicDriver_975

02/13/2026

Super easy to get these on, they fit perfectly. Plus, they arrived way faster than I expected, which was awesome because I needed them ASAP. Great service all around.

Josh Anderson

09/11/2026

Verified buyer

Works great. Half the price of the local auto parts store.

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

Possible signs include humming or grinding that changes with vehicle speed, wheel looseness, vibration, or an ABS warning. Similar symptoms can have other causes, so an inspection is recommended.

Package contents vary by part number. Please check the product images and specifications to confirm whether the hub, ABS sensor, axle nut, or other hardware is included.

2005-2010 Volvo S40 Wheel Bearing 2 PC Rear AWD | 312770456 | PHILTOP