PHILTOP 2Pcs Suspension Kit Rear Upper Rearward Control Arm Fit for 2007-2012 Elantra 2.0L 2006-2010 Optima/Magentis

PHILTOP 2Pcs Suspension Kit Rear Upper Rearward Control Arm Fit for 2007-2012 Elantra 2.0L 2006-2010 Optima/Magentis

Corrosion Resistant

Deformation Resistant

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3974OCA257CUS

Specifications

Brand
PHILTOP
Items Included
2x Rear Upper Rearward Control Arm - MS90165/RK641862
Quantity
2
Position
Rear Upper
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
551002G000
Part Number
RK641862,TC6109,CA60606PR,1026115

Highlights

  • #47,815 in Automotive (See Top 100 in Automotive)
  • #92 in Automotive Replacement Control Arms
  • Fitment: PHILTOP control arms suspension kit fit for Kia Magentis/Optima(Except Coil Spring Over Shock;Non-Adjustable Type) 2006, Magentis/Optima(Non-Adjustable Type) 2007-2010, Hyundai Elantra 2.0L(Non-Adjustable Type) 2007-2012. Please check fitment for accurate information before purchasing
  • Kit Includes: 2x Rear Upper Rearward Control Arms
  • OE Number: Control Arms for MS90165/RK641862
  • Easy Installation: Precision tolerances for easy installation on all parts. Control arm has steering alignment that ensure you a perfect work
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20102007 - 201020072007 - 201020092010 - 20122010 - 201220062007 - 201020062007 - 201020062007 - 201020062007 - 20102009 - 20102009 - 2010
MakeHyundaiHyundaiHyundaiHyundaiHyundaiHyundaiHyundaiKiaKiaKiaKiaKiaKiaKiaKiaKiaKia
ModelElantraElantraElantraElantraElantraElantraElantraOptimaOptimaOptimaOptimaOptimaOptimaOptimaOptimaOptimaOptima
TrimBlueGLSLimitedSETouringTouring GLSTouring SEEXEXEXEXLXLXLXLXSXSX
Engine2.0L L42.0L L42.0L L42.0L L42.0L L42.0L L42.0L L42.4L L42.4L L42.7L V62.7L V62.4L L42.4L L42.7L V62.7L V62.4L L42.7L V6
Note
Non-Adjustable Type
Non-Adjustable Type
Non-Adjustable Type
Non-Adjustable Type
Non-Adjustable Type
Non-Adjustable Type
Non-Adjustable Type
Exc. Coil Spring Over Shock;Non‑Adjustable Type
Non-Adjustable Type
Exc. Coil Spring Over Shock;Non‑Adjustable Type
Non-Adjustable Type
Exc. Coil Spring Over Shock;Non‑Adjustable Type
Non-Adjustable Type
Exc. Coil Spring Over Shock;Non‑Adjustable Type
Non-Adjustable Type
Non-Adjustable Type
Non-Adjustable Type

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

4.7/5

Based on 3 reviews

567%
433%
30%
20%
10%

Emma_DailyCommute_597

04/27/2026

Swapping these out was easier than I thought it would be. They fit perfectly and the hardware included was good quality. Plus, they got here really fast!

Lisa_CivicDriver_104

11/03/2025

These control arms are built tough. The metal feels solid and the finish is nice. For the price, you're getting some really good quality parts here. Highly recommend.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.