PHILTOP 4PCS Front Lower Control Arm Suspension Kit Fit for 320i 325i 330i 2001-2005, 323Ci 328Ci 2000, 323i 328i 1999-2000, 323

PHILTOP 4PCS Front Lower Control Arm Suspension Kit Fit for 320i 325i 330i 2001-2005, 323Ci 328Ci 2000, 323i 328i 1999-2000, 323

Corrosion Resistant

Deformation Resistant

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7867CAK347SUS

Specifications

Brand
PHILTOP
Items Included
1x Front Left Lower Control Arm - K80527 1x Front Right Lower Control Arm - K80528 2x Bushings K200714
Quantity
4
Position
Front Lower
Surface Finish
Polished
Material
Aluminum
Warranty Period
2-Year
OE Number
31126754899,31126754900,31126756064,31126777850,31124004359,31122341297,31122750222,31126750057,31126783376,31126758519,31126758520,31126752718,31126752717,31126777851,31126751317,31126751318,31126774820,31126757623,31126777852,31126774819,31126770247,31126770248,31121094465,31121094466,31126750223,31126750224,31122282121,31122282122
Part Number
K200714,RK80527,RK80528,TD890W,TC2596,TD407W,CK80527,GK80527,BWH106,GS10405,CAS14294,CAS14293PR,CAS14165PR,BU09083,BU09082,1017018,CB14383PR

Highlights

  • #109,328 in Automotive (See Top 100 in Automotive)
  • #342 in Automotive Replacement Control Arms
  • Fitment: PHILTOP Control Arms Lower Ball Joints Sway Bars Tie Rods for 325i 2001-2005, Z4 2003-2008, 330Ci 2001-2006, 325Ci 2001-2006, 330i 2001-2005, 323i 2.5L 1999-2000, 323Ci 2000, 328i 2.8L 1999, 328i 2000, 328Ci 2000, 323is 1999.
  • OE NUMBER: K80527, K80528, K200714, 31126783376, 31126757623, 905801, MS10405, TC1727, TC1728, 1016092, 45G3793, 523074, 45G3794, TD890W, TD1047W.
  • OE NUMBER: Control Arms Lower Ball Joints Sway Bars Tie Rods K80527, K80528, K200714.
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life. All materials used for the control arm coating are environmentally friendly.
  • Simple Installation: Our control arms meet production standards and are dimensionally accurate. This makes installation simple and requires no additional action.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20001999 - 200019992001 - 20062001 - 200520001999 - 20002001 - 20062001 - 20052003 - 20052003 - 20052006 - 20082006 - 20082006 - 20082006 - 20082006 - 2008
MakeBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMW
Model323Ci323i323is325Ci325i328Ci328i330Ci330iZ4Z4Z4Z4Z4Z4Z4
TrimBaseBaseBaseBaseBaseBaseBaseBaseBase2.5i3.0iCoupe 3.0siM CoupeM RoadsterRoadster 3.0iRoadster 3.0si
Engine2.5L L62.5L L62.5L L62.5L L62.5L L62.8L L62.8L L63.0L L63.0L L62.5L L63.0L L63.0L L63.2L L63.2L L63.0L L63.0L L6
Note----
From 02/2001
-----------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.7/5

Based on 3 reviews

567%
433%
30%
20%
10%

Mike from Texas_450

03/03/2026

Got these installed yesterday and they went on without a hitch. Shipping was super fast, arrived right on time. Very happy with the quick turnaround.

Jennifer_Auto_474

10/05/2025

My 330i was starting to wander and feel loose. After putting these on, the difference is incredible! Steering is tight and the ride is smooth. Worth every penny.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.