2003-2019 Toyota Corolla 1.8L L4/2.0L L4/2.4L L4 | 2 PC Front Wheel Bearing | 9036340066/510070 - PHILTOP

2003-2019 Toyota Corolla 1.8L L4/2.0L L4/2.4L L4 | 2 PC Front Wheel Bearing | 9036340066/510070 - PHILTOP

Triple-Lip Seal

Front

AISI 52100

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1632WBK168ZUS

Specifications

Brand
PHILTOP
Position
Front
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front Wheel Bearing - 510070,Installation Instructions
Surface Finish
Polished, Rust Protected
Warranty Period
2-Year
OE Number
9036340066,88971027,9036340069
Part Number
510070,41244009,WE60696,FW188,H510070,DAC4074W3CS80,SA0070,710070,PT510070
Quantity
2

Highlights

  • Exact Replacement: 510070 Front Wheel hub assembly compatible with Toyota Corolla 2003-2019, Toyota Matrix 2003-2013, Pontiac Vibe 2003-2010, Scion tC 2005-2010, Toyota Celica 2000-2005, Toyota Corolla iM 2017-2018, Toyota Prius 2001-2003, Toyota MR2 Spyder 2000-2005
  • Premium Quality Materials: The wheel bearing hub assembly is crafted from high-grade materials. The outer ring and flange are constructed using premium #55 carbon structural steel, ensuring exceptional surface hardness and strength.
  • Long Lifespan: The brand-new wheel hub assemblies and studs feature a corrosion-resistant surface finish, ensuring extended bearing life. With an advanced seal design and triple oil seals, they deliver lasting performance while reducing noise and vibration. The enhanced sealing also effectively blocks moisture and contaminants.
  • Installation: Wheel hubs excellent assembly performance, precise overall structure, easy and quick installation.
  • Customer Service: PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2003 - 20102003 - 20062005 - 20102007 - 20082000 - 20052000 - 200520172009 - 20112003 - 20082012 - 201820192003 - 201820192014 - 2018201920142003 - 20162017 - 20182019201920162009 - 20102017 - 201820192005 - 20062009 - 20102017 - 2018201920192017 - 20182000 - 20052003 - 20132003 - 20082003 - 20062001 - 2003
MakePontiacPontiacScionScionToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelVibeVibetCtCCelicaCelicaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorolla iMMR2 SpyderMatrixMatrixMatrixPrius
TrimBaseGTBaseSpecGTGTS50th Anniversary Special EditionBaseCELLLELELE EcoLE EcoLe Eco PlusSSESESESpecial EditionXLEXLEXLEXRSXRSXSEXSEXSEBaseBaseBaseXRXRSBase
Engine1.8L L41.8L L42.4L L42.4L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L42.0L L41.8L L41.8L L41.8L L41.8L L41.8L L42.4L L41.8L L41.8L L42.0L L41.8L L41.8L L41.8L L41.8L L41.8L L41.5L L4
Note----------
Japan built
-
Japan built
-
Japan built
---
Japan built
Japan built
---
Japan built
---
Japan built
Japan built
------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.6/5

Based on 8 reviews

575%
413%
313%
20%
10%

Lamont L.

11/09/2025

Verified buyer

Works the same as when I first put it on.

Shane Craig

10/19/2025

Verified buyer

Every batch maintains the same high quality standards.

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

A single bearing can often be replaced when only one side is worn. The condition of the bearing on the opposite side should also be checked because wear can vary by vehicle and use.

The design depends on the application. Compare the product type and images with the original part before installation; press-in bearings generally require suitable shop tools.