2004-2008 Acura TL 3.2L V6/3.5L V6 | 2 PC Rear Wheel Bearing | 42200SDAA51/512188 - PHILTOP

2004-2008 Acura TL 3.2L V6/3.5L V6 | 2 PC Rear Wheel Bearing | 42200SDAA51/512188 - PHILTOP

Triple-Lip Seal

Rear

AISI 52100

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8494WBK173VUS

Specifications

Brand
PHILTOP
ABS Type
Tone Ring
Lug Count
5
Position
Rear
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Rear Wheel Hub and Bearing Assembly - 512188,Installation Instructions
Bolt Pattern
5 X 4.5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.17 in
Wheel Stud Size
M12x1.5
Flange Offset
2.2 in/56 mm
Flange Diameter
5.49 in/139.5 mm
Brake Pilot Diameter
2.52 in/64.0 mm
Warranty Period
2-Year
OE Number
42200SDAA51,42200SED952
Part Number
512188,40640009,BR930383,712188,H512188,0516178,VKBA3962,WE60580,7350312,NT512188,102093,40640009E,G512188,RW8188,HUB2836
Quantity
2

Highlights

Product highlights are being verified.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2004 - 20082007 - 20082003 - 20052003 - 20072003 - 2007200720072003 - 20072003 - 2007200620052005200720072006 - 2007
MakeAcuraAcuraHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHonda
ModelTLTLAccordAccordAccordAccordAccordAccordAccordAccordAccordAccordAccordAccordAccord
TrimBaseType-SDXEXEXEX-LEX-LLXLXLX Special EditionSESESpecial EditionSpecial EditionValue Package
Engine3.2L V63.5L V62.4L L42.4L L43.0L V62.4L L43.0L V62.4L L43.0L V62.4L L42.4L L43.0L V62.4L L43.0L V62.4L L4
Note---------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.8/5

Based on 6 reviews

583%
417%
30%
20%
10%

Kelly_SUV_Life_870

04/28/2026

Took care of the wobble I was feeling in my TL's rear wheel. These hubs fit perfectly and now it drives smooth and quiet. Glad I went with these.

RickFixIt_35

11/08/2025

Arrived super fast, got the job done ahead of schedule. The parts fit like a glove on my TL, and the install was straightforward. Highly recommend!

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

Package contents vary by part number. Please check the product images and specifications to confirm whether the hub, ABS sensor, axle nut, or other hardware is included.

A single bearing can often be replaced when only one side is worn. The condition of the bearing on the opposite side should also be checked because wear can vary by vehicle and use.