2004-2013 Mazda 3 2.0L/2.3L/2.5L | 1 PC Rear Wheel Bearing | BBM22615XA/512347 - PHILTOP

2004-2013 Mazda 3 2.0L/2.3L/2.5L | 1 PC Rear Wheel Bearing | BBM22615XA/512347 - PHILTOP

Triple-Lip Seal

Rear

AISI 52100

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6129WBK1002US

Specifications

Brand
PHILTOP
Lug Count
5
Position
Rear
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
1x Rear Wheel Hub and Bearing Assembly - 512347,Installation Instructions
Bolt Pattern
5 X 4.5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
2.9 in
Wheel Stud Size
M12*1.5
Flange Offset
2.48 in/63.1 mm
Flange Diameter
5.59 in/142.0 mm
Brake Pilot Diameter
2.83 in/72.0 mm
Warranty Period
2-Year
OE Number
BBM22615XA,BP4K2615XA,BBM22615X,3N612C299A,BP4K2615XD,B35N2615XA,BFF42615X,BP4K2615XF,BBM22615XB,BP4K2615XB,BP4K2615XC,BP4K2615XE
Part Number
512347,HA590099,WE60617,7450002,40745000,BR930681,BR930603,712347,WA512347,29512347,H512347,NT512347,40745000E,473347,WH512347,VKBA6801,HUB454T1,HUB040T35,P512347,101830,PT512347,141109817,516296,40745,G512347
Quantity
1

Highlights

  • Fitment: Philtop wheel hub bearing assembly for 5 2012-2015, 5 2006-2010, 3 2004-2013.
  • Wheel Hubs Parameter: Anti Lock Brake Sensor Included: Yes; Bolt Circle Diameter: 114.300 mm; Brake Pilot Diameter: 72.000 mm; Flange Bolt Hole Quantity: 4; Flange Diameter: 142.000 mm; Flange Offset: 63.100 mm; Flange Shape: MODIFIED; Hub Pilot Diameter: 73.400 mm; Wheel Pilot Diameter: 67.000 mm; Wheel Stud Quantity: 5.
  • OE NUMBER: Wheel bearing hub for 512347, 051-6296, 3N61-2C299-A, 3N612C299A, 407.45000E, 712347, 7450002, BBM2-26-15X, BBM2-26-15XA, BBM2-26-15XB, BBM22615X, BBM22615XA, BBM22615XB, BP4K-26-15XA, BP4K-26-15XB, BP4K-26-15XC, BP4K-26-15XD, BP4K-26-15XE, BP4K-26-15XF, BP4K2615XA, BP4K2615XB, BP4K2615XC, BP4K2615XD, BP4K2615XE, BP4K2615XF, BR930603, BR930681, H512347, HA590099, NT512347, QHUB-168.
  • Long Service Life: Wheel bearing and hub assembly is made of high-quality bearing steel, the parts have the greatest anti-corrosion capacity with fine workmanship and strong bearing capacity.
  • Tips: For more details, please confirm the adaptation of your vehicle with "Suncentautoconfirmedfit". This is very necessary for a better experience.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2007 - 20082009 - 20132004 - 200820092010 - 201320052004 - 20082009 - 20132007 - 20102012 - 20152006 - 20102012 - 20152006 - 20102012 - 2015
MakeMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazda
Model33333333555555
TrimMazdaspeedMazdaspeedSSSSP23iiGrand TouringGrand TouringSportSportTouringTouring
Engine2.3L L42.3L L42.3L L42.3L L42.5L L42.3L L42.0L L42.0L L42.3L L42.5L L42.3L L42.5L L42.3L L42.5L L4
Note
4-Wheel ABS
-
4-Wheel ABS
--
4-Wheel ABS
4-Wheel ABS
-------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

PHILTOPPT

Reviews

4.5/5

Based on 6 reviews

567%
417%
317%
20%
10%

Elainemcallister1945@gmail Customer

01/26/2025

Verified buyer

Good product at reasanable price

Rob_HomeGarage_688

04/06/2026

This bearing feels really beefy and well-made. For the price, I'm really impressed with the quality. Should hold up well.

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

The design depends on the application. Compare the product type and images with the original part before installation; press-in bearings generally require suitable shop tools.

Some bearings have a magnetic encoder or sealing side that must face a particular direction. Follow the vehicle service information and any markings supplied with the part.

2004-2013 Mazda 3 Wheel Bearing 1 PC Rear | BBM22615XA | PHILTOP