2006-2018 Toyota RAV4 2.5L/2.4L/3.5L | 2 PC Rear Wheel Bearing | OE#424100R010/512374 - PHILTOP

2006-2018 Toyota RAV4 2.5L/2.4L/3.5L | 2 PC Rear Wheel Bearing | OE#424100R010/512374 - PHILTOP

Triple-Lip Seal

Rear

AISI 52100

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3501WBR3124US

Specifications

Brand
PHILTOP
ABS Type
Magnetic Ring
Lug Count
5
Position
Rear
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Rear Wheel Hub and Bearing Assembly - 512374,Installation Instructions
Bolt Pattern
5 X 4.5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3 in
Wheel Stud Size
M12*1.5
Flange Offset
2.36 in/60 mm
Flange Diameter
5.96 in/151.5 mm
Brake Pilot Diameter
2.44 in/61.9 mm
Warranty Period
2-Year
OE Number
424100R010,4241042040
Part Number
512374,HA590201,WE61617,7700047,40044009,BR930765,712374,H512374,WA512374,WH512374,PT512374,NT512374,102340,29512374,BR930295,40044009E,PBR930636,1411258930,516261,G512374,58BWKH19Y5CP01
Quantity
2

Highlights

  • Compatibility: Wheel Bearing and Hub Assembly for 2013-2018 RAV4 AWD, 2006-2012 RAV4 4WD, 2018-2021 NX300 AWD, 2015-2017 NX200t AWD, 2017-2021 NX300h, 2015-2016 NX300h AWD
  • Wheel Hub Num: 512374, 424100R010, BR930765, HA590201, WE61617, 4241042040, 712374, 0516261, PBR930636, WA512374, H512374, PT512374, 40044009, 7700047, 29512374, NT512374, WH512374
  • Superior Quality: Our wheel hubs are made of high quality materials and have the same performance as the original equipment. In addition, the wheel bearing hub assembly is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
  • Recovery Performance: Wheel bearings support the gravity of the entire body and precisely guide the wheel rotation. High-quality wheel hub assemblies allow you to drive your vehicle safely and smoothly.
  • Please Note: If you do not have an installation manual or are not skilled enough to install wheel bearings, it is recommended that you seek assistance from a qualified mechanic.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2015 - 20172015 - 20172018 - 20212018 - 20212020 - 20212015 - 20162017 - 202120212020 - 202120182006 - 20082009 - 20122006 - 20122016 - 20182017 - 20182016 - 20182013 - 20182006 - 20082009 - 20122013 - 20182006 - 20122017 - 20182016 - 20182006 - 20082009 - 20122006 - 20122013 - 2018
MakeLexusLexusLexusLexusLexusLexusLexusLexusLexusToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelNX200tNX200tNX300NX300NX300NX300hNX300hNX300hNX300hRAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4
TrimBaseF SportBaseF SportLuxuryBaseBaseF Sport Black LineLuxuryAdventureBaseBaseBaseHybrid LimitedHybrid SEHybrid XLELELimitedLimitedLimitedLimitedPlatinumSESportSportSportXLE
Engine2.0L L42.0L L42.0L L42.0L L42.0L L42.5L L42.5L L42.5L L42.5L L42.5L L42.4L L42.5L L43.5L V62.5L L42.5L L42.5L L42.5L L42.4L L42.5L L42.5L L43.5L V62.5L L42.5L L42.4L L42.5L L43.5L V62.5L L4
Note
All-Wheel Drive
All-Wheel Drive
All-Wheel Drive
All-Wheel Drive
All-Wheel Drive
All-Wheel Drive
---
All-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
All-Wheel Drive
All-Wheel Drive
All-Wheel Drive
All-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
All-Wheel Drive
Four-Wheel Drive
All-Wheel Drive
All-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
All-Wheel Drive

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.5/5

Based on 2 reviews

550%
450%
30%
20%
10%

jonathan

07/18/2026

Verified buyer

Excelente producto funciona perfectamente

Kelly_SUV_Life_902

01/30/2026

This hub assembly was pretty straightforward to install, even though I needed an extra tool. Luckily, I had it in my toolbox already. The shipping was super fast too, got here quicker than I expected!

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

Torque values differ by vehicle and fastener. Use the vehicle manufacturer’s specification rather than a general value, as incorrect torque may affect bearing operation.

Alignment may be advisable if suspension or steering components are disturbed during the repair. Follow the vehicle service procedure and check alignment if the vehicle pulls or the steering wheel is off-center.

2006-2018 Toyota RAV4 Wheel Bearing 2 PC Rear | 424100R010 | PHILTOP