2010-2017 Chevrolet Equinox 2.4L/3.0L/3.6L | 2 PC Rear Wheel Bearing | 25979186/512440 - PHILTOP

2010-2017 Chevrolet Equinox 2.4L/3.0L/3.6L | 2 PC Rear Wheel Bearing | 25979186/512440 - PHILTOP

Triple-Lip Seal

Rear

AISI 52100

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
9585WSA320HUS

Specifications

Brand
PHILTOP
ABS Type
Speed Sensor
Lug Count
5
Position
Rear
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Rear Wheel Hub and Bearing Assembly - 512440,Installation Instructions
Bolt Pattern
5 X 4.72
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.3 in
Wheel Stud Size
M14*1.5
Flange Offset
2.52 in/64 mm
Flange Diameter
6.18 in/157.0 mm
Brake Pilot Diameter
2.65 in/67.4 mm
Warranty Period
2-Year
OE Number
25979186
Part Number
512440,HA590470,WE60837,40262022,BR930838,RW20132,H512440,7303210,102758,40262022E,G512440,WH590470,GRA112RRB,1411481311,91481311
Quantity
2

Highlights

  • Exact Replacement: 512440 Rear Wheel hub assembly compatible with Chevrolet Equinox 2010-2017, GMC Terrain 2010-2017
  • Premium Quality Materials: The wheel bearing hub assembly is crafted from high-grade materials. The outer ring and flange are constructed using premium #55 carbon structural steel, ensuring exceptional surface hardness and strength.
  • Long Lifespan: The brand-new wheel hub assemblies and studs feature a corrosion-resistant surface finish, ensuring extended bearing life. With an advanced seal design and triple oil seals, they deliver lasting performance while reducing noise and vibration. The enhanced sealing also effectively blocks moisture and contaminants.
  • Installation: Wheel hubs excellent assembly performance, precise overall structure, easy and quick installation.
  • Customer Service: PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2015 - 20172010 - 20172010 - 20172010 - 20122013 - 20172010 - 20162010 - 20122013 - 2016201720172013 - 20172013 - 20172015 - 20172010 - 20172010 - 20122013 - 20172010 - 20172010 - 20122013 - 2017
MakeChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletGMCGMCGMCGMCGMCGMCGMCGMCGMC
ModelEquinoxEquinoxEquinoxEquinoxEquinoxEquinoxEquinoxEquinoxEquinoxEquinoxTerrainTerrainTerrainTerrainTerrainTerrainTerrainTerrainTerrain
TrimLLSLTLTLTLTZLTZLTZPremierPremierDenaliDenaliSLSLESLESLESLTSLTSLT
Engine2.4L L42.4L L42.4L L43.0L V63.6L V62.4L L43.0L V63.6L V62.4L L43.6L V62.4L L43.6L V62.4L L42.4L L43.0L V63.6L V62.4L L43.0L V63.6L V6
Note-------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.6/5

Based on 7 reviews

571%
414%
314%
20%
10%

Zachary Tworek

08/17/2026

Verified buyer

Fitment was great! Put 5000 miles on them before I sold the car.

DIY_Karen_171

03/19/2026

This completely solved the wheel noise problem I was having. My car feels stable and safe again. Super happy with how these turned out. A definite improvement.

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

The design depends on the application. Compare the product type and images with the original part before installation; press-in bearings generally require suitable shop tools.

Some bearings have a magnetic encoder or sealing side that must face a particular direction. Follow the vehicle service information and any markings supplied with the part.