2007-2015 Mazda CX-9 3.5L V6/3.7L V6 | 2 PC Rear AWD Wheel Bearing | OE#L2142615XA/512449 - PHILTOP

2007-2015 Mazda CX-9 3.5L V6/3.7L V6 | 2 PC Rear AWD Wheel Bearing | OE#L2142615XA/512449 - PHILTOP

Triple-Lip Seal

Rear

AWD

4.9

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8258WBR297JUS

Specifications

Brand
PHILTOP
ABS Type
No
Drive Type
AWD
Lug Count
5
Position
Rear
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Rear Wheel Hub and Bearing Assembly - 512449,Installation Instructions
Bolt Pattern
5 X 4.5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.1 in
Wheel Stud Size
M12x1.5
Flange Offset
2.48 in/63 mm
Flange Diameter
5.51 in/140.0 mm
Brake Pilot Diameter
2.83 in/72.0 mm
Warranty Period
2-Year
OE Number
L2142615XA,L2142615XB,L2142615X
Part Number
512449,HA590056,WE61649,40045003,BR930770,0516413,H512449,712449,G512449,102368,WH590056,40045003E,7453010,1411289738,3DACF038D5B
Quantity
2

Highlights

  • Exact Replacement: 512449 Rear Wheel hub assembly compatible with Mazda CX-9 2007-2015 AWD
  • Premium Quality Materials: The wheel bearing hub assembly is crafted from high-grade materials. The outer ring and flange are constructed using premium #55 carbon structural steel, ensuring exceptional surface hardness and strength.
  • Long Lifespan: The brand-new wheel hub assemblies and studs feature a corrosion-resistant surface finish, ensuring extended bearing life. With an advanced seal design and triple oil seals, they deliver lasting performance while reducing noise and vibration. The enhanced sealing also effectively blocks moisture and contaminants.
  • Installation: Wheel hubs excellent assembly performance, precise overall structure, easy and quick installation.
  • Customer Service: PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20072008 - 201520072008 - 201520072008 - 2015
MakeMazdaMazdaMazdaMazdaMazdaMazda
ModelCX-9CX-9CX-9CX-9CX-9CX-9
TrimGrand TouringGrand TouringSportSportTouringTouring
Engine3.5L V63.7L V63.5L V63.7L V63.5L V63.7L V6
Note
All-Wheel Drive
All-Wheel Drive
All-Wheel Drive
All-Wheel Drive
All-Wheel Drive
All-Wheel Drive

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.9/5

Based on 10 reviews

590%
410%
30%
20%
10%

Ang R

02/08/2026

Verified buyer

The installation process was straightforward with common tools.

Araceli Santana

02/08/2026

Verified buyer

The wheel vibration issue has been resolved after replacement.

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

Package contents vary by part number. Please check the product images and specifications to confirm whether the hub, ABS sensor, axle nut, or other hardware is included.

A single bearing can often be replaced when only one side is worn. The condition of the bearing on the opposite side should also be checked because wear can vary by vehicle and use.