2007-2015 Mazda CX-9 3.5L V6/3.7L V6 | 1 PC Rear FWD Wheel Bearing | L2062615XA/512452 - PHILTOP

2007-2015 Mazda CX-9 3.5L V6/3.7L V6 | 1 PC Rear FWD Wheel Bearing | L2062615XA/512452 - PHILTOP

Triple-Lip Seal

Rear

FWD

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
9842WBR057DUS

Specifications

Brand
PHILTOP
Drive Type
FWD
Lug Count
5
Position
Rear
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
1x Rear Wheel Hub and Bearing Assembly - 512452,Installation Instructions
Bolt Pattern
5x4.5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.1 in
Flange Offset
2.48 in/63 mm
Flange Diameter
5.51 in/140.0 mm
Brake Pilot Diameter
2.83 in/72.0 mm
Warranty Period
2-Year
OE Number
L2062615XA,L2062615X,L2062615XB,FC4072S03
Part Number
512452,HA590041,WE61870,40745004,WA512452,0516452,H512452,473452,7453020,102367,PT512452,1411289737,3DACF038F3DRAM,3DACF038F3DR,3DACF038F3BR
Quantity
1

Highlights

  • Fitment: Rear Wheel hub assembly compatible with 2007-2015 CX-9 FWD
  • Superior Quality: Our wheel bearing hub assembly are made of high quality materials and have the same performance as the original equipment. In addition, the wheel hubs is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
  • Recovery Performance: PHILTOP hub bearings enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. Wheel hub bearing can provide you with a smooth and quiet driving environment, enhancing your driving experience.
  • Installation: Wheel hubs excellent assembly performance, precise overall structure, easy and quick installation.
  • Customer Service: PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20072008 - 201520072008 - 201520072008 - 2015
MakeMazdaMazdaMazdaMazdaMazdaMazda
ModelCX-9CX-9CX-9CX-9CX-9CX-9
TrimGrand TouringGrand TouringSportSportTouringTouring
Engine3.5L V63.7L V63.5L V63.7L V63.5L V63.7L V6
Note
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.7/5

Based on 7 reviews

571%
429%
30%
20%
10%

Brad_AutoParts_844

04/13/2026

My CX-9 was vibrating badly, and this bearing fixed it completely. Feels much safer to drive now. Great replacement part.

Rob_HomeGarage_448

04/16/2026

Super easy to put on my CX-9. Got it delivered fast and it was installed in less than an hour. Highly recommend for a quick fix.

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

Possible signs include humming or grinding that changes with vehicle speed, wheel looseness, vibration, or an ABS warning. Similar symptoms can have other causes, so an inspection is recommended.

Package contents vary by part number. Please check the product images and specifications to confirm whether the hub, ABS sensor, axle nut, or other hardware is included.

2007-2015 Mazda CX-9 Wheel Bearing 1 PC Rear FWD | L2062615XA | PHILTOP