2011-2019 Ford Explorer 3.5L | 2 PC Front Rear Wheel Bearing | BB5Z1104A/512460 - PHILTOP

2011-2019 Ford Explorer 3.5L | 2 PC Front Rear Wheel Bearing | BB5Z1104A/512460 - PHILTOP

Triple-Lip Seal

Front、Rear

AISI 52100

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
2069WBK194WUS

Specifications

Brand
PHILTOP
ABS Type
Magnetic Ring
Lug Count
5
Position
Front、Rear
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front、Rear Wheel Hub and Bearing Assembly - 512460,Installation Instructions
Bolt Pattern
5 X 4.5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.6 in
Wheel Stud Size
1/2"x20 Unf
Flange Offset
1.69 in/42.8 mm
Flange Diameter
5.73 in/145.6 mm
Brake Pilot Diameter
2.67 in/67.9 mm
Warranty Period
2-Year
OE Number
BB5Z1104A,BB532C300AC,HB5Z1104C,HB5Z1104B,HB5Z1104A,BB532C300AE,083286234741
Part Number
512460,HA590446,WE60589,40161001,BR930809,HUB87,H512460,WA512460,NT512460,PT512460,HUB376,712460,91480977,G512460,HA590721,WH1162,WH590446,29594027,40161001E,1411480977,530879,FWF166
Quantity
2

Highlights

  • Fitment: PHILTOP Wheel Hub Bearing Assembly for Ford Explorer 2011-2019, Ford Police Interceptor Utility 2013-2019.
  • Wheel Hubs Parameter: Anti Lock Brake Sensor Included : Yes; Bolt Circle Diameter : 114.300 mm; Brake Pilot Diameter : 67.900 mm; Flange Bolt Hole Quantity : 4; Flange Diameter : 145.600 mm; Flange Offset : 42.800 mm; Hub Pilot Diameter : 92.000 mm; Spline Quantity : 38; Wheel Pilot Diameter : 63.200 mm; Wheel Stud Quantity : 5.
  • Simple Installation: Hub bearings are manufactured to OE standards to ensure consistency in shape and function with the original factory.
  • Long Service Life: Made of high-quality bearing steel, the parts have the greatest anti-corrosion capacity with fine workmanship and strong bearing capacity.
  • Excellent Performance: Application-specific advanced raceway design reduces stress, rotation and heat on components.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2012 - 20152016 - 20192011 - 20192012 - 20152016 - 20192011 - 20192016 - 20192013 - 20192012 - 20152016 - 20192011 - 20192014 - 20192013 - 2019
MakeFordFordFordFordFordFordFordFordFordFordFordFordFord
ModelExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerPolice Interceptor UtilityPolice Interceptor Utility
TrimBaseBaseBaseLimitedLimitedLimitedPlatinumSportXLTXLTXLTBaseBase
Engine2.0L L42.3L L43.5L V62.0L L42.3L L43.5L V63.5L V63.5L V62.0L L42.3L L43.5L V63.5L V63.7L V6
Note-------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

PHILTOPPT

Reviews

4.7/5

Based on 11 reviews

582%
49%
39%
20%
10%

dwight long

05/28/2026

Verified buyer

Good product. stop the rumble in the rear of my 2012 Explorer

Alejandra

12/09/2025

Verified buyer

Buenos

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

Noise may come from another wheel bearing, the tire, brake, CV joint, or an installation issue. Recheck the installation and inspect nearby components before assuming the new bearing is faulty.

Keep the part clean, avoid impact through the rolling elements, use the correct pressing surface, and tighten fasteners to the specified torque. Professional installation is recommended if special tools are required.