1999-2006 Jeep Wrangler 4.0L | 2 PC Front Wheel Bearing | 5016458/513158 - PHILTOP

1999-2006 Jeep Wrangler 4.0L | 2 PC Front Wheel Bearing | 5016458/513158 - PHILTOP

Triple-Lip Seal

Front

AISI 52100

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1407WBK206QUS

Specifications

Brand
PHILTOP
ABS Type
No
Lug Count
5
Position
Front
Flange Bolt Hole Count
3
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front Wheel Hub and Bearing Assembly - 513158,Installation Instructions
Bolt Pattern
5 X 4.5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.9 in
Wheel Stud Size
1/2"x20 Unf
Flange Offset
1.91 in/48.4 mm
Flange Diameter
6.04 in/153.5 mm
Brake Pilot Diameter
2.83 in/71.9 mm
Warranty Period
2-Year
OE Number
5016458,05016458AA,53007449AC,5016458AA
Part Number
513158,HA597449,7200080,40058002E,40058002,BR930219,713158,WE60823,H513158,NT513158,WH513158,V2507449AA,V2506458AA,559450,951047,DL513158,FW9158,G513158,49151,53036019,559450A1,PT513158,7200225,HA513158,HZF062B3B
Quantity
2

Highlights

  • [Exact Replacement] 513158 Front Wheel Bearing and Hub Assembly fit for 1999-2006 Jeep Wrangler, 1999-2001 Jeep Cherokee
  • [Premium Quality Materials] Front wheel bearing hub assembly are manufactured with premium quality materials. The outer ring and flange are made of high quality #55 carbon structural steel for high surface hardness and strength.
  • [Long lifespan] Brand new wheel hub assemblies and studs with rust and corrosion protected surface finish, making it has longer bearing life. Better seal design and triple oil seal, which lasts and minimizes noise and vibration and vibration also keeping moisture and other contaminants out.
  • [Specification] ①Position: Front ; ②ABS Included: No; ③Wheel Stud Quantity: 5; ④Flange Bolt Hole Quantity: 3; ⑤Reference Part Number: 513158, HA597449, BR930219, 53007449AC, 5016458AA, WE60823. Please refer to the Vehicle menu at the top of the list, select your vehicle's "Year, Make, Model" and click "Confirm" to make sure the wheel bearing fit your car.
  • [Customer Service] PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year19992000 - 200119992000 - 20011999200019992000 - 200119992000 - 200120062003 - 20062003 - 200619992000 - 20022005 - 200619992000 - 200419992000 - 20062004 - 20062005 - 20062002 - 2006
MakeJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeep
ModelCherokeeCherokeeCherokeeCherokeeCherokeeCherokeeCherokeeCherokeeCherokeeCherokeeWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWrangler
TrimClassicClassicLimitedLimitedSESESESESportSport65th Anniversary EditionRubiconSESESESESaharaSaharaSportSportUnlimitedUnlimited RubiconX
Engine4.0L L64.0L L64.0L L64.0L L62.5L L42.5L L44.0L L64.0L L64.0L L64.0L L64.0L L64.0L L62.4L L42.5L L42.5L L44.0L L64.0L L64.0L L64.0L L64.0L L64.0L L64.0L L64.0L L6
Note
2nd Design;Full Cast Rotor
Cast Rotor
2nd Design;Full Cast Rotor
Cast Rotor
2nd Design;Full Cast Rotor
Cast Rotor
2nd Design;Full Cast Rotor
Cast Rotor
2nd Design;Full Cast Rotor
Cast Rotor
---
Full Cast Rotor
--
Full Cast Rotor
-
Full Cast Rotor
----

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.7/5

Based on 7 reviews

571%
429%
30%
20%
10%

ROBERTO

01/26/2025

Verified buyer

Came in 2 days, perfect fit. No issues at all.

Lisa_CivicDriver_817

11/21/2025

Feel super solid and well-made. You can tell these are built to last. For the cost, you're getting an amazing deal on these Jeep bearings.

FAQS

Warranty coverage and duration may vary by product. For specific warranty period details by product category, please refer to our Warranty & Returns Policy page. Damage related to incorrect fitment, installation or other vehicle problems may require further review.

Keep the part clean, avoid impact through the rolling elements, use the correct pressing surface, and tighten fasteners to the specified torque. Professional installation is recommended if special tools are required.

Possible signs include humming or grinding that changes with vehicle speed, wheel looseness, vibration, or an ABS warning. Similar symptoms can have other causes, so an inspection is recommended.