2005-2010 Chevrolet Cobalt 2.2L | 2 PC Front Wheel Bearing | 12413077/513205 - PHILTOP

2005-2010 Chevrolet Cobalt 2.2L | 2 PC Front Wheel Bearing | 12413077/513205 - PHILTOP

Triple-Lip Seal

Front

AISI 52100

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3207WSA374HUS

Specifications

Brand
PHILTOP
ABS Type
No
Lug Count
4
Position
Front
Flange Bolt Hole Count
3
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front Wheel Hub and Bearing Assembly - 513205,Installation Instructions
Bolt Pattern
4 X 3.94
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.3 in
Wheel Stud Size
M12*1.5
Flange Offset
1.54 in/39 mm
Flange Diameter
5.22 in/132.5 mm
Brake Pilot Diameter
2.34 in/59.5 mm
Warranty Period
2-Year
OE Number
12413077,12413078,12413165,7467576,22667147,22701520
Part Number
513205,HA590069,WE60796,7990156,40062003,BR930315,930614,H513205,713205,40062003E,FW9205,NT513205,WA513205,29513205,WH513205,0514154,104205,DL513205,G513205,TXF513205,P513205,102212,7467576UR,9149099,141149099,1AMH513205,PM513205,PT513205
Quantity
2

Highlights

  • [Exact Replacement] 513205 Front Wheel Bearing and Hub Assembly fit for 2005-2010 Chevrolet Cobalt, 2003-2007 Saturn Ion, 2007-2009 Pontiac G5
  • [Premium Quality Materials] Front wheel bearing hub assembly are manufactured with premium quality materials. The outer ring and flange are made of high quality #55 carbon structural steel for high surface hardness and strength.
  • [Long lifespan] Brand new wheel hub assemblies and studs with rust and corrosion protected surface finish, making it has longer bearing life. Better seal design and triple oil seal, which lasts and minimizes noise and vibration and vibration also keeping moisture and other contaminants out.
  • [Specification] â‘ Position: Front ; ②ABS Included: No; ③Wheel Stud Quantity: 4; ④Flange Bolt Hole Quantity: 3; ⑤Reference Part Number: 513205, BR930315, HA590069, 12413077, 22701520, 12413078. Please refer to the Vehicle menu at the top of the list, select your vehicle's "Year, Make, Model" and click "Confirm" to make sure the wheel bearing fit your car.
  • [Customer Service] PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year200520102006 - 20102007 - 20102007 - 20092003 - 20052003 - 20072003 - 20072006 - 2007
MakeChevroletChevroletChevroletChevroletPontiacSaturnSaturnSaturnSaturn
ModelCobaltCobaltCobaltCobaltG5IonIonIonIon
TrimBaseBaseLSLTBase1233
Engine2.2L L42.2L L42.2L L42.2L L42.2L L42.2L L42.2L L42.2L L42.4L L4
Note
4 Lug;Non-ABS
4 Lug;Non-ABS
4 Lug;Non-ABS
4 Lug;Non-ABS
4 Lug;Non-ABS
4 Lug;Non-ABS
4 Lug;Non-ABS
4 Lug;Non-ABS
4 Lug;Non-ABS

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.4/5

Based on 5 reviews

560%
420%
320%
20%
10%

Mountain man

11/16/2023

Verified buyer

Good product, and arrived quickly. Works excellent 👍

Nancy_FirstCar_722

04/12/2026

The wobble and noise I was experiencing are completely gone. My Cobalt drives straight and quiet again. It's a huge relief and makes driving so much more enjoyable.

FAQS

Noise may come from another wheel bearing, the tire, brake, CV joint, or an installation issue. Recheck the installation and inspect nearby components before assuming the new bearing is faulty.

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.