2006-2013 Volvo C70 2.5L | 1 PC Front Wheel Bearing | 1336139/513255 - PHILTOP

2006-2013 Volvo C70 2.5L | 1 PC Front Wheel Bearing | 1336139/513255 - PHILTOP

Triple-Lip Seal

Front

AISI 52100

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7329WBK523GUS

Specifications

Brand
PHILTOP
ABS Type
Magnetic Ring
Lug Count
5
Position
Front
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
1x Front Wheel Hub and Bearing Assembly - 513255,Installation Instructions
Bolt Pattern
5 X 4.25
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.1 in
Wheel Stud Size
M12*1.5
Flange Offset
2.42 in/61.5 mm
Flange Diameter
5.17 in/131.4 mm
Brake Pilot Diameter
2.5 in/63.4 mm
Warranty Period
2-Year
OE Number
1336139,1223640,1326487,30714730,30736653,31340604,31212698,30683161,30714492,312629500,312126980,30730828,312629504,306831610,307147300,307147306,313406040,31262950,30666605,30666130
Part Number
513255,HA590323,WE61096,7900004,HA590456,40039009,29825,HA590212,26770,BR930675,VKBA6543,VKBA3660,H513255,WA513255,NT513255,734255,805787E,29513255,C676,CR2339,40039009E,1411246647,FW9255,BR930853,G513255,516226
Quantity
1

Highlights

  • [Compatibility] 513255 Wheel Hub Bearing Assembly fit for 2005-2011 S40, 2006-2013 C70, 2008-2013 C30, 2005-2011 V50
  • [Superior Quality] wheel bearing hub assembly are made of high quality materials and have the same performance as the original equipment. In addition, the wheel hubs is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
  • [Recovery Performance] PHILTOP hub bearings enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. Bearing assembly can provide you with a smooth and quiet driving environment, enhancing your driving experience.
  • [Installation] Wheel hubs excellent assembly performance, precise overall structure, easy and quick installation.
  • [Customer Service] PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2008 - 20132008 - 20132006 - 20132006 - 20102005 - 200920112010 - 201120052006 - 20102005 - 200920112010 - 20112005
MakeVolvoVolvoVolvoVolvoVolvoVolvoVolvoVolvoVolvoVolvoVolvoVolvoVolvo
ModelC30C30C70S40S40S40S40S40V50V50V50V50V50
TrimT5T5 R-DesignT52.4iT5T5T5 R-Designi2.4iT5T5T5 R-Designi
Engine2.5L L52.5L L52.5L L52.4L L52.5L L52.5L L52.5L L52.4L L52.4L L52.5L L52.5L L52.5L L52.4L L5
Note-------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.7/5

Based on 3 reviews

567%
433%
30%
20%
10%

Lisa_CivicDriver_895

10/22/2025

This is a really well-made part. Feels solid and robust. For the price, it's an absolute steal compared to OEM parts. My Volvo is running like new again.

Mike from Texas_422

04/19/2026

Replaced the worn out bearing on my S40 with this and it's like night and day. No more wobbly wheel or weird humming. Car tracks straight and true now, feels much safer.

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

Alignment may be advisable if suspension or steering components are disturbed during the repair. Follow the vehicle service procedure and check alignment if the vehicle pulls or the steering wheel is off-center.

Noise may come from another wheel bearing, the tire, brake, CV joint, or an installation issue. Recheck the installation and inspect nearby components before assuming the new bearing is faulty.

2006-2013 Volvo C70 Wheel Bearing 1 PC Front | 1336139 | PHILTOP