2008-2015 Scion xB 2.4L L4 | 2 PC Front Wheel Bearing | 4355042010/513257 - PHILTOP

2008-2015 Scion xB 2.4L L4 | 2 PC Front Wheel Bearing | 4355042010/513257 - PHILTOP

Triple-Lip Seal

Front

AISI 52100

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6935WBK219XUS

Specifications

Brand
PHILTOP
ABS Type
Magnetic Ring
Lug Count
5
Position
Front
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front Wheel Hub and Bearing Assembly - 513257,Installation Instructions
Bolt Pattern
5 X 4.5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.5 in
Wheel Stud Size
M12*1.5
Flange Offset
1.87 in/47.5 mm
Flange Diameter
5.47 in/139.0 mm
Brake Pilot Diameter
2.44 in/62.0 mm
Warranty Period
2-Year
OE Number
4355042010,435500R010
Part Number
513257,HA590165,WE60803,7700353,40044003,BR930615,694257,101850,1411246649,WH513257,29513257,3DACF041D3DR,PM513257,P513257,ZA62BWKH10,PT513257,FW9257
Quantity
2

Highlights

  • [Exact Replacement] 513257 Front Wheel Bearing and Hub Assembly fit for 2006-2012 Toyota RAV4, 2008-2015 Scion xB, 2012-2017 Toyota Prius V, 2011-2016 Scion tC, 2017-2018 Toyota Corolla iM, 2016 Scion iM, 2010-2012 Lexus HS250h
  • [Premium Quality Materials] Front wheel bearing hub assembly are manufactured with premium quality materials. The outer ring and flange are made of high quality #55 carbon structural steel for high surface hardness and strength.
  • [Long lifespan] Brand new wheel hub assemblies and studs with rust and corrosion protected surface finish, making it has longer bearing life. Better seal design and triple oil seal, which lasts and minimizes noise and vibration and vibration also keeping moisture and other contaminants out.
  • [Specification] ①Position: Front ; ②ABS Included: No; ③Wheel Stud Quantity: 5; ④Flange Bolt Hole Quantity: 4; ⑤Reference Part Number: 513257, HA590165, 4355042010, BR930615, 435500R010. Please refer to the Vehicle menu at the top of the list, select your vehicle's "Year, Make, Model" and click "Confirm" to make sure the wheel bearing fit your car.
  • [Customer Service] PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010 - 20122010 - 201220162011 - 20162008 - 20152017 - 20182012 - 20172015 - 20172012 - 20172012 - 20172006 - 20082009 - 20122006 - 20082009 - 20122006 - 20082009 - 2012
MakeLexusLexusScionScionScionToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelHS250hHS250hiMtCxBCorolla iMPrius VPrius VPrius VPrius VRAV4RAV4RAV4RAV4RAV4RAV4
TrimBasePremiumBaseBaseBaseBaseFiveFourThreeTwoBaseBaseLimitedLimitedSportSport
Engine2.4L L42.4L L41.8L L42.5L L42.4L L41.8L L41.8L L41.8L L41.8L L41.8L L42.4L L42.5L L42.4L L42.5L L42.4L L42.5L L4
Note----------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.5/5

Based on 6 reviews

567%
417%
317%
20%
10%

James Trotta

01/04/2024

Verified buyer

installed good fit

SarahDrives_610

10/13/2025

Seriously good quality for how much they cost. My Scion xB feels so much more stable and the steering is tighter. Fantastic value, couldn't be happier.

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

Alignment may be advisable if suspension or steering components are disturbed during the repair. Follow the vehicle service procedure and check alignment if the vehicle pulls or the steering wheel is off-center.

Noise may come from another wheel bearing, the tire, brake, CV joint, or an installation issue. Recheck the installation and inspect nearby components before assuming the new bearing is faulty.