[Exact Replacement] 513325 Front Wheel Bearing and Hub Assembly fit for 2012-2013 2015-2023 Dodge Charger RWD, 2012-2016 2019-2022 Dodge Challenger, 2012-2023 Chrysler 300 RWD, 2017-2023 Dodge Challenger RWD, 2012 2019-2022 Dodge Charger, 2012 Chrysler 300
[Premium Quality Materials] Front wheel bearing hub assembly are manufactured with premium quality materials. The outer ring and flange are made of high quality #55 carbon structural steel for high surface hardness and strength.
[Long lifespan] Brand new wheel hub assemblies and studs with rust and corrosion protected surface finish, making it has longer bearing life. Better seal design and triple oil seal, which lasts and minimizes noise and vibration and vibration also keeping moisture and other contaminants out.
[Specification] ①Position: Front ; ②ABS Included: No; ③Wheel Stud Quantity: 5; ④Flange Bolt Hole Quantity: 3; ⑤Reference Part Number: 513325, HA590465, 5154262AA, 05154262AA, 68302651AA. Please refer to the Vehicle menu at the top of the list, select your vehicle's "Year, Make, Model" and click "Confirm" to make sure the wheel bearing fit your car.
[Customer Service] PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.
Confirm the vehicle, position, drive type and ABS compatibility.
Compare the mounting holes, splines and sensor configuration with the original part.
Prepare a press or puller and the vehicle-specific torque specifications.
Park on level ground, chock the wheels and support the vehicle with jack stands.
Installation Steps
Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.
After Installation
Rotate the wheel and check for noise, resistance or play.
Confirm proper brake operation and make sure the ABS light is off.
Perform a low-speed road test and check for vibration, steering pull or unusual noise.
Retorque after approximately 100 km when required by the vehicle manufacturer.
Critical Installation Notes
Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
Start Bolts by Hand: Thread bolts two or three turns before using power tools.
Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.
Product Video
Product Description
Reviews
4.3/5
Based on 4 reviews
5
50%
4
25%
3
25%
2
0%
1
0%
M
Mike from Texas_870
04/11/2026
My Charger's steering felt all loosey-goosey, and the ABS light was on. Replaced the old hubs with these and it's like a whole new car. Steering is tight again, and that annoying light is gone. Definitely worth the upgrade.
A
Amanda_MomOfThree_150
09/30/2025
My old Charger was making that awful grinding noise, sounded like a jet engine taking off. Popped these babies on and man, what a difference! The ride is so much smoother now, no more worrying about it breaking down on me.
FAQS
Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.
Noise may come from another wheel bearing, the tire, brake, CV joint, or an installation issue. Recheck the installation and inspect nearby components before assuming the new bearing is faulty.
Keep the part clean, avoid impact through the rolling elements, use the correct pressing surface, and tighten fasteners to the specified torque. Professional installation is recommended if special tools are required.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
2012-2023 Dodge Challenger 6.4L/3.6L/5.7L/6.2L | 2 PC Front RWD Wheel Bearing | OE#5154262AA/513325 - PHILTOP
Triple-Lip Seal
Front
RWD
SKU:
7246WBK2319US
4.3
$103.01$10301
Check if this fits your vehicle
Select a vehicle to check this product.
Drive Type
RWD
Lug Count
5
Position
Front
Flange Bolt Hole Count
3
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front Wheel Hub and Bearing Assembly - 513325,Installation Instructions
Bolt Pattern
5 X 4.5
Surface Finish
Polished, Rust Protected
[Exact Replacement] 513325 Front Wheel Bearing and Hub Assembly fit for 2012-2013 2015-2023 Dodge Charger RWD, 2012-2016 2019-2022 Dodge Challenger, 2012-2023 Chrysler 300 RWD, 2017-2023 Dodge Challenger RWD, 2012 2019-2022 Dodge Charger, 2012 Chrysler 300
[Premium Quality Materials] Front wheel bearing hub assembly are manufactured with premium quality materials. The outer ring and flange are made of high quality #55 carbon structural steel for high surface hardness and strength.
[Long lifespan] Brand new wheel hub assemblies and studs with rust and corrosion protected surface finish, making it has longer bearing life. Better seal design and triple oil seal, which lasts and minimizes noise and vibration and vibration also keeping moisture and other contaminants out.
[Specification] ①Position: Front ; ②ABS Included: No; ③Wheel Stud Quantity: 5; ④Flange Bolt Hole Quantity: 3; ⑤Reference Part Number: 513325, HA590465, 5154262AA, 05154262AA, 68302651AA. Please refer to the Vehicle menu at the top of the list, select your vehicle's "Year, Make, Model" and click "Confirm" to make sure the wheel bearing fit your car.
[Customer Service] PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.
4.3
4 reviews
5 star: 2
4 star: 1
3 star: 1
Compatible Vehicles
Check if this fits your vehicle
Year
Make
Model
Trim
Engine
Notes
2012
Chrysler
300
Base
3.6L V6
RWD;with 4 Piston Caliper
2013 - 2014
Chrysler
300
Base
3.6L V6
RWD
2013 - 2014
Chrysler
300
C
3.6L V6
RWD
2017
Chrysler
300
C
3.6L V6
RWD
2012
Chrysler
300
C
5.7L V8
RWD;with 4 Piston Caliper
2013 - 2020
Chrysler
300
C
5.7L V8
RWD
2023
Chrysler
300
C
6.4L V8
RWD
2013 - 2014
Chrysler
300
C Luxury
3.6L V6
RWD
2012
Chrysler
300
C Luxury
5.7L V8
RWD;with 4 Piston Caliper
2013 - 2014
Chrysler
300
C Luxury
5.7L V8
RWD
2017
Chrysler
300
C Platinum
3.6L V6
RWD
2015 - 2017
Chrysler
300
C Platinum
5.7L V8
RWD
2012
Chrysler
300
Limited
3.6L V6
RWD;with 4 Piston Caliper
2017 - 2020
Chrysler
300
Limited
3.6L V6
RWD
2012
Chrysler
300
S
3.6L V6
RWD;with 4 Piston Caliper
2013 - 2014
Chrysler
300
S
3.6L V6
RWD
2017 - 2023
Chrysler
300
S
3.6L V6
RWD
2012
Chrysler
300
S
5.7L V8
RWD;with 4 Piston Caliper
2013 - 2023
Chrysler
300
S
5.7L V8
RWD
2018 - 2023
Chrysler
300
Touring
3.6L V6
RWD
2018 - 2023
Chrysler
300
Touring L
3.6L V6
RWD
2016
Dodge
Challenger
392 Hemi Scat Pack Shaker
6.4L V8
-
2019 - 2023
Dodge
Challenger
GT
3.6L V6
RWD;with 4 Piston Caliper
2012 - 2016
Dodge
Challenger
R/T
5.7L V8
-
2017 - 2023
Dodge
Challenger
R/T
5.7L V8
RWD;with 4 Piston Caliper
2017 - 2019
Dodge
Challenger
R/T 392
6.4L V8
RWD;with 4 Piston Caliper
2012
Dodge
Challenger
R/T Classic
5.7L V8
-
2015 - 2016
Dodge
Challenger
R/T Plus
5.7L V8
-
2016
Dodge
Challenger
R/T Plus Shaker
5.7L V8
-
2016
Dodge
Challenger
R/T Scat Pack
6.4L V8
-
2017 - 2023
Dodge
Challenger
R/T Scat Pack
6.4L V8
RWD;with 4 Piston Caliper
2021
Dodge
Challenger
R/T Scat Pack Shaker Widebody
6.4L V8
RWD;with 4 Piston Caliper
2019 - 2023
Dodge
Challenger
R/T Scat Pack Widebody
6.4L V8
RWD;with 4 Piston Caliper
2016
Dodge
Challenger
R/T Shaker
5.7L V8
-
2014
Dodge
Challenger
Rallye Redline
3.6L V6
-
2015 - 2016
Dodge
Challenger
SRT 392
6.4L V8
-
2017 - 2018
Dodge
Challenger
SRT 392
6.4L V8
RWD;with 4 Piston Caliper
2018
Dodge
Challenger
SRT Demon
6.2L V8
RWD;with 4 Piston Caliper
2023
Dodge
Challenger
SRT Demon 170
6.2L V8
RWD;with 4 Piston Caliper
2015 - 2016
Dodge
Challenger
SRT Hellcat
6.2L V8
-
2017 - 2022
Dodge
Challenger
SRT Hellcat
6.2L V8
RWD;with 4 Piston Caliper
2023
Dodge
Challenger
SRT Hellcat Jailbreak
6.2L V8
RWD;with 4 Piston Caliper
2019 - 2022
Dodge
Challenger
SRT Hellcat Redeye
6.2L V8
RWD;with 4 Piston Caliper
2023
Dodge
Challenger
SRT Hellcat Redeye Jailbreak
6.2L V8
RWD;with 4 Piston Caliper
2019 - 2022
Dodge
Challenger
SRT Hellcat Redeye Widebody
6.2L V8
RWD;with 4 Piston Caliper
2023
Dodge
Challenger
SRT Hellcat Redeye Widebody Jailbreak
6.2L V8
RWD;with 4 Piston Caliper
2018 - 2022
Dodge
Challenger
SRT Hellcat Widebody
6.2L V8
RWD;with 4 Piston Caliper
2023
Dodge
Challenger
SRT Hellcat Widebody Jailbreak
6.2L V8
RWD;with 4 Piston Caliper
2022
Dodge
Challenger
SRT Jailbreak
6.2L V8
RWD;with 4 Piston Caliper
2020 - 2023
Dodge
Challenger
SRT Super Stock
6.2L V8
RWD;with 4 Piston Caliper
2012 - 2016
Dodge
Challenger
SXT
3.6L V6
-
2017 - 2023
Dodge
Challenger
SXT
3.6L V6
RWD;with 4 Piston Caliper
2012
Dodge
Challenger
SXT Plus
3.6L V6
-
2015 - 2016
Dodge
Challenger
SXT Plus
3.6L V6
-
2017 - 2018
Dodge
Challenger
SXT Plus
3.6L V6
RWD;with 4 Piston Caliper
2015
Dodge
Challenger
Scat Pack
6.4L V8
-
2017 - 2018
Dodge
Challenger
T/A
5.7L V8
RWD;with 4 Piston Caliper
2017 - 2018
Dodge
Challenger
T/A 392
6.4L V8
RWD;with 4 Piston Caliper
2021
Dodge
Challenger
T/A 392 Widebody
6.4L V8
RWD;with 4 Piston Caliper
2017 - 2018
Dodge
Charger
Daytona
5.7L V8
RWD
2017 - 2018
Dodge
Charger
Daytona 392
6.4L V8
RWD
2019 - 2023
Dodge
Charger
GT
3.6L V6
RWD;with 4 Piston Caliper
2015
Dodge
Charger
Pursuit
3.6L V6
RWD;with 3 Bolt Flange
2016 - 2018
Dodge
Charger
Pursuit
3.6L V6
RWD
2019 - 2023
Dodge
Charger
Pursuit
3.6L V6
RWD;with 4 Piston Caliper
2015
Dodge
Charger
Pursuit
5.7L V8
RWD;with 3 Bolt Flange
2016 - 2018
Dodge
Charger
Pursuit
5.7L V8
RWD
2019 - 2023
Dodge
Charger
Pursuit
5.7L V8
RWD;with 4 Piston Caliper
2012 - 2013
Dodge
Charger
R/T
5.7L V8
-
2015
Dodge
Charger
R/T
5.7L V8
RWD;with 3 Bolt Flange
2016 - 2018
Dodge
Charger
R/T
5.7L V8
RWD
2019 - 2023
Dodge
Charger
R/T
5.7L V8
RWD;with 4 Piston Caliper
2017 - 2018
Dodge
Charger
R/T 392
6.4L V8
RWD
2015
Dodge
Charger
R/T Road & Track
5.7L V8
RWD;with 3 Bolt Flange
2016
Dodge
Charger
R/T Road & Track
5.7L V8
RWD
2015
Dodge
Charger
R/T Scat Pack
6.4L V8
RWD;with 3 Bolt Flange
2016 - 2018
Dodge
Charger
R/T Scat Pack
6.4L V8
RWD
2012 - 2013
Dodge
Charger
SE
3.6L V6
RWD;with 3 Bolt Flange
2015
Dodge
Charger
SE
3.6L V6
RWD;with 3 Bolt Flange
2016 - 2017
Dodge
Charger
SE
3.6L V6
RWD
2012 - 2013
Dodge
Charger
SE
5.7L V8
RWD;with 3 Bolt Flange
2015
Dodge
Charger
SRT 392
6.4L V8
RWD;with 3 Bolt Flange
2016 - 2018
Dodge
Charger
SRT 392
6.4L V8
RWD
2015
Dodge
Charger
SRT Hellcat
6.2L V8
RWD;with 3 Bolt Flange
2016 - 2018
Dodge
Charger
SRT Hellcat
6.2L V8
RWD
2019 - 2020
Dodge
Charger
SRT Hellcat
6.2L V8
RWD;with 4 Piston Caliper
2021 - 2023
Dodge
Charger
SRT Hellcat Redeye Widebody
6.2L V8
RWD;with 4 Piston Caliper
2023
Dodge
Charger
SRT Hellcat Redeye Widebody Jailbreak
6.2L V8
RWD;with 4 Piston Caliper
2020 - 2023
Dodge
Charger
SRT Hellcat Widebody
6.2L V8
RWD;with 4 Piston Caliper
2023
Dodge
Charger
SRT Hellcat Widebody Jailbreak
6.2L V8
RWD;with 4 Piston Caliper
2022
Dodge
Charger
SRT Jailbreak
6.2L V8
RWD;with 4 Piston Caliper
2012 - 2013
Dodge
Charger
SXT
3.6L V6
-
2015
Dodge
Charger
SXT
3.6L V6
RWD;with 3 Bolt Flange
2016 - 2018
Dodge
Charger
SXT
3.6L V6
RWD
2019 - 2023
Dodge
Charger
SXT
3.6L V6
RWD;with 4 Piston Caliper
2012
Dodge
Charger
SXT Plus
3.6L V6
RWD;with 3 Bolt Flange
2018
Dodge
Charger
SXT Plus
3.6L V6
RWD
2018
Dodge
Charger
SXT Plus Leather
3.6L V6
RWD
2019 - 2023
Dodge
Charger
Scat Pack
6.4L V8
RWD;with 4 Piston Caliper
2020
Dodge
Charger
Scat Pack 392 Widebody
6.4L V8
RWD;with 4 Piston Caliper
2022 - 2023
Dodge
Charger
Scat Pack Widebody
6.4L V8
RWD;with 4 Piston Caliper
Product Specifications
Brand
PHILTOP
Drive Type
RWD
Lug Count
5
Position
Front
Flange Bolt Hole Count
3
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front Wheel Hub and Bearing Assembly - 513325,Installation Instructions
Confirm the vehicle, position, drive type and ABS compatibility.
Compare the mounting holes, splines and sensor configuration with the original part.
Prepare a press or puller and the vehicle-specific torque specifications.
Park on level ground, chock the wheels and support the vehicle with jack stands.
Installation Steps
Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.
After Installation
Rotate the wheel and check for noise, resistance or play.
Confirm proper brake operation and make sure the ABS light is off.
Perform a low-speed road test and check for vibration, steering pull or unusual noise.
Retorque after approximately 100 km when required by the vehicle manufacturer.
Critical Installation Notes
Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
Start Bolts by Hand: Thread bolts two or three turns before using power tools.
Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.
Product Video
Product Description
Reviews
4.3/5
Based on 4 reviews
5
50%
4
25%
3
25%
2
0%
1
0%
M
Mike from Texas_870
Apr 11,2026
My Charger's steering felt all loosey-goosey, and the ABS light was on. Replaced the old hubs with these and it's like a whole new car. Steering is tight again, and that annoying light is gone. Definitely worth the upgrade.
A
Amanda_MomOfThree_150
Sep 30,2025
My old Charger was making that awful grinding noise, sounded like a jet engine taking off. Popped these babies on and man, what a difference! The ride is so much smoother now, no more worrying about it breaking down on me.
FAQS
Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.
Noise may come from another wheel bearing, the tire, brake, CV joint, or an installation issue. Recheck the installation and inspect nearby components before assuming the new bearing is faulty.
Keep the part clean, avoid impact through the rolling elements, use the correct pressing surface, and tighten fasteners to the specified torque. Professional installation is recommended if special tools are required.