2015-2021 Ford Mustang 5.0L V8/2.3L L4/3.7L V6 | 2 PC Front Wheel Bearing | OE#FR3Z1104A/513346 - PHILTOP

2015-2021 Ford Mustang 5.0L V8/2.3L L4/3.7L V6 | 2 PC Front Wheel Bearing | OE#FR3Z1104A/513346 - PHILTOP

Triple-Lip Seal

Front

AISI 52100

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7991WBR2080US

Specifications

Brand
PHILTOP
ABS Type
Tone Ring
Lug Count
5
Position
Front
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front Wheel Hub and Bearing Assembly - 513346,Installation Instructions
Bolt Pattern
5 X 4.5
Surface Finish
Polished, Rust Protected
Wheel Stud Size
M14*1.5
Flange Offset
2.17 in/55 mm
Flange Diameter
5.81 in/147.7 mm
Brake Pilot Diameter
2.79 in/70.9 mm
Warranty Period
2-Year
OE Number
FR3Z1104A
Part Number
513346,HA590598,MB40318
Quantity
2

Highlights

  • Compatibility: 513346 x2 Wheel Hub Bearing Assembly fit for 2015-2021 Ford Mustang.
  • Superior Quality: Front wheel bearing hub assembly are made of high quality materials and have the same performance as the original equipment. In addition, the wheel hubs is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
  • Recovery Performance: PHILTOP hub bearings enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. Bearing assembly can provide you with a smooth and quiet driving environment, enhancing your driving experience.
  • Installation: Front Wheel hubs excellent assembly performance, precise overall structure, easy and quick installation.
  • Customer Service: PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2019 - 20202015 - 20212015 - 20212015 - 202020152015 - 20212015 - 2017
MakeFordFordFordFordFordFordFord
ModelMustangMustangMustangMustangMustangMustangMustang
TrimBullittEcoBoostEcoBoost PremiumGTGT 50 Years Limited EditionGT PremiumV6
Engine5.0L V82.3L L42.3L L45.0L V85.0L V85.0L V83.7L V6
Note-------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

PHILTOPPT

Reviews

5.0/5

Based on 4 reviews

5100%
40%
30%
20%
10%

Chris_GearHead_611

12/05/2025

My Mustang was pulling to one side, and I suspected the wheel hub. Replacing it with this part solved the issue completely. The steering feels centered and stable now, a huge improvement.

SarahDrives_100

01/16/2026

Installation was surprisingly straightforward on my Mustang. Shipping was fast too, arrived ahead of schedule. All in all, a smooth and easy process from ordering to having them on the car.

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

Torque values differ by vehicle and fastener. Use the vehicle manufacturer’s specification rather than a general value, as incorrect torque may affect bearing operation.

Alignment may be advisable if suspension or steering components are disturbed during the repair. Follow the vehicle service procedure and check alignment if the vehicle pulls or the steering wheel is off-center.