2007-2011 Lexus GS350 3.5L | 1 PC Front Wheel Bearing | 4356030031/513365 - PHILTOP

2007-2011 Lexus GS350 3.5L | 1 PC Front Wheel Bearing | 4356030031/513365 - PHILTOP

Triple-Lip Seal

Front Left

AISI 52100

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6833WBK542FUS

Specifications

Brand
PHILTOP
ABS Type
Magnetic Ring
Lug Count
5
Position
Front Left
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
1x Front Left Wheel Hub and Bearing Assembly - 513365,Installation Instructions
Bolt Pattern
5 X 4.5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.5 in
Wheel Stud Size
M12x1.5
Flange Offset
1.97 in/50.1 mm
Flange Diameter
5.51 in/140.0 mm
Brake Pilot Diameter
2.44 in/62.0 mm
Warranty Period
2-Year
OE Number
4356030031,4356030030
Part Number
513365,HA590140,WE61812,MB86304,29594008,40144000E,7700044,40144000
Quantity
1

Highlights

  • Compatibility: Front Left Wheel Bearing and Hub Assembly for 2006-2015 Lexus IS250 AWD, 2007-2011 2013-2020 Lexus GS350 AWD, 2016-2017 Lexus IS300, 2018-2019 Lexus IS300 AWD, 2015-2022 Lexus RC350 AWD, 2006 Lexus GS300 AWD, 2011-2020 Lexus IS350 AWD, 2016-2017 Lexus RC300, 2018-2022 Lexus RC300 AWD, 2020-2022 Lexus RC300 RWD, 2018-2019 Lexus IS300 RWD.
  • Wheel Hub Num: 513365, 4356030031, HA590140, 4356030030, BR930943, WE61812, MB86304, 7700044, 40144000E, 29594008, 40144000.
  • Superior Quality: Our wheel hubs are made of high quality materials and have the same performance as the original equipment. In addition, the wheel bearing hub assembly is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
  • Recovery Performance: Wheel bearings support the gravity of the entire body and precisely guide the wheel rotation. High-quality wheel hub assemblies allow you to drive your vehicle safely and smoothly.
  • Customer Service: PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20062007 - 20112013 - 20202013 - 20202006 - 20152014 - 20152016 - 20172018 - 20192016 - 20172018 - 20192011 - 201420202014 - 201920202018 - 20192016 - 20172018 - 20222018 - 20192016 - 20172018 - 20222015 - 20222015 - 2022
MakeLexusLexusLexusLexusLexusLexusLexusLexusLexusLexusLexusLexusLexusLexusLexusLexusLexusLexusLexusLexusLexusLexus
ModelGS300GS350GS350GS350IS250IS250IS300IS300IS300IS300IS350IS350IS350IS350RC300RC300RC300RC300RC300RC300RC350RC350
TrimBaseBaseBaseF SportBaseF SportBaseBaseF SportF SportBaseBaseF SportF SportBaseBaseBaseF SportF SportF SportBaseF Sport
Engine3.0L V63.5L V63.5L V63.5L V62.5L V62.5L V63.5L V63.5L V63.5L V63.5L V63.5L V63.5L V63.5L V63.5L V62.0L L43.5L V63.5L V62.0L L43.5L V63.5L V63.5L V63.5L V6
Note
All-Wheel Drive
All-Wheel Drive
--
All-Wheel Drive
All-Wheel Drive
-
All-Wheel Drive
-
All-Wheel Drive
All-Wheel Drive
-
All-Wheel Drive
-
All-Wheel Drive
-
All-Wheel Drive
All-Wheel Drive
-
All-Wheel Drive
All-Wheel Drive
All-Wheel Drive

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

5.0/5

Based on 2 reviews

5100%
40%
30%
20%
10%

Steve_DIYer_675

11/18/2025

This arrived fast and fit my Lexus perfectly. Swapping it out was pretty simple, and it immediately got rid of the wobble I was feeling. Great part!

Tom_Handy_627

03/07/2026

Installation was pretty straightforward on my Lexus, and it arrived quickly. Everything fit perfectly and the new bearing is nice and quiet.

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

A single bearing can often be replaced when only one side is worn. The condition of the bearing on the opposite side should also be checked because wear can vary by vehicle and use.

The design depends on the application. Compare the product type and images with the original part before installation; press-in bearings generally require suitable shop tools.