2016-2022 Lexus RX350 3.5L | 1 PC Front Wheel Bearing 435500E010/513397 - PHILTOP

2016-2022 Lexus RX350 3.5L | 1 PC Front Wheel Bearing 435500E010/513397 - PHILTOP

Triple-Lip Seal

Front

AISI 52100

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
5936WBR031KUS

Specifications

Brand
PHILTOP
ABS Type
Magnetic Ring
Lug Count
5
Position
Front
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
1x Front Wheel Hub and Bearing Assembly - 513397,Installation Instructions
Bolt Pattern
5x4.5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.7 in
Flange Offset
1.87 in/47.4 mm
Flange Diameter
5.98 in/151.9 mm
Brake Pilot Diameter
2.44 in/61.9 mm
Warranty Period
2-Year
OE Number
435500E010,4355006050,4355033020,435500E011,4355048011,436E17
Part Number
513397,HA590758,WE61873
Quantity
1

Highlights

  • Fitment: Front Wheel bearing hub assebly compatible with 2016-2022 Lexus RX350, 2019-2023 Lexus ES350, 2018-2024 Toyota Camry, 2016-2022 Lexus RX450h, 2019-2022 Toyota Avalon, 2018-2022 Lexus RX350L, 2019-2023 Lexus ES300h, 2018-2022 Lexus RX450hL, 2021 Toyota Avalon FWD, 2021 Toyota Avalon AWD
  • Superior Quality: Our wheel hubs are made of high quality materials and have the same performance as the original equipment. In addition, the wheel bearing hub assembly is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
  • Recovery Performance: PHILTOP Wheel hub bearing enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. Bearing can provide you with a smooth and quiet driving environment, enhancing your driving experience.
  • Installation: Wheel hubs excellent assembly performance, precise overall structure, easy and quick installation.
  • Customer Service: PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2016 - 20222016 - 20222018 - 20222016 - 20222016 - 20222018 - 2022
MakeLexusLexusLexusLexusLexusLexus
ModelRX350RX350RX350LRX450hRX450hRX450hL
TrimBaseF SportBaseBaseF SportBase
Engine3.5L V63.5L V63.5L V63.5L V63.5L V63.5L V6
Note
Built In USA
Built In USA
-
Built In USA
Built In USA
-

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.6/5

Based on 8 reviews

575%
413%
313%
20%
10%

Ali

09/07/2025

Verified buyer

Unbelievably quiet! Gone are the grinding noises. These bearings deliver buttery-smooth operation. Worth every penny.

Ricardo Dias

05/11/2025

Verified buyer

The rugged design inspires confidence. No flexing or stress marks after months of heavy use. These are made to endure!

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.