2018-2023 Audi Q5 2.0L | 1 PC Front Rear Wheel Bearing | 8W0407625G/513433 - PHILTOP

2018-2023 Audi Q5 2.0L | 1 PC Front Rear Wheel Bearing | 8W0407625G/513433 - PHILTOP

Triple-Lip Seal

Front、Rear

AISI 52100

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
2600WBK5561US

Specifications

Brand
PHILTOP
ABS Type
Magnetic Ring
Position
Front、Rear
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
1x Front、Rear Wheel Bearing - 513433,Installation Instructions
Surface Finish
Polished, Rust Protected
Warranty Period
2-Year
OE Number
8W0407625G
Part Number
513433,MB70307
Quantity
1

Highlights

  • Fitment: Front Wheel hub assembly compatible with 2018-2023 Q5, 2020-2023 Q7, 2018-2023 SQ5, 2019-2023 A6 Quattro, 2020-2023 Q5 PHEV, 2021-2023 Q5 Sportback, 2019-2023 A7 Sportback, 2019-2023 A8 Quattro, 2020-2023 SQ7, 2021-2023 SQ5 Sportback, 2020-2023 A6 allroad, 2021-2023 RS6 Avant, 2021-2023 RS7 Sportback, 2020-2023 S6, 2020-2023 S7 Sportback, 2020-2023 S8
  • Superior Quality: Our wheel bearing hub assembly are made of high quality materials and have the same performance as the original equipment. In addition, the wheel hubs is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
  • Recovery Performance: PHILTOP hub bearings enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. Wheel hub bearing can provide you with a smooth and quiet driving environment, enhancing your driving experience.
  • Installation: Wheel hubs excellent assembly performance, precise overall structure, easy and quick installation.
  • Customer Service: PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2019 - 20232019 - 20232019 - 20232019 - 20232019 - 20232020 - 20232020 - 20232019 - 20232021 - 20222019 - 20232021 - 20222019 - 20232019 - 20232019 - 20212020 - 20212018 - 20232018 - 20232018 - 20232020202020202020 - 20232020 - 20232020 - 20232021 - 20232021 - 20232021 - 20232020 - 20232020 - 20232020 - 20232020 - 202320222020 - 20232021 - 20232021 - 202320232020 - 20232020 - 202320232020 - 20232020 - 20232020 - 20232019 - 20232018 - 20232018 - 20232021 - 20232021 - 20232021 - 20232020 - 20232020 - 2023
MakeAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudiAudi
ModelA6 QuattroA6 QuattroA6 QuattroA6 QuattroA6 QuattroA6 allroadA6 allroadA7 SportbackA7 SportbackA7 SportbackA7 SportbackA7 SportbackA8 QuattroA8 QuattroA8 QuattroQ5Q5Q5Q5Q5Q5Q5 PHEVQ5 PHEVQ5 PHEVQ5 SportbackQ5 SportbackQ5 SportbackQ7Q7Q7Q7Q7Q7RS6 AvantRS7 SportbackS6S6S6S7 SportbackS7 SportbackS7 SportbackS8SQ5SQ5SQ5SQ5 SportbackSQ5 SportbackSQ5 SportbackSQ7SQ7
TrimPremiumPremiumPremium PlusPremium PlusPrestigePremium PlusPrestigePremiumPremium PlusPremium PlusPrestigePrestigeLLL Plug-In HybridPremiumPremium PlusPrestigeTitanium PremiumTitanium Premium PlusTitanium PrestigePremiumPremium PlusPrestigePremiumPremium PlusPrestigePremiumPremiumPremium PlusPremium PlusPrestigePrestigeBaseBasePremiumPremium PlusPrestigePremiumPremium PlusPrestigeBasePremiumPremium PlusPrestigePremiumPremium PlusPrestigePremium PlusPrestige
Engine2.0L L43.0L V62.0L L43.0L V63.0L V63.0L V63.0L V63.0L V62.0L L43.0L V62.0L L43.0L V63.0L V64.0L V83.0L V62.0L L42.0L L42.0L L42.0L L42.0L L42.0L L42.0L L42.0L L42.0L L42.0L L42.0L L42.0L L42.0L L43.0L V62.0L L43.0L V62.0L L43.0L V64.0L V84.0L V82.9L V62.9L V62.9L V62.9L V62.9L V62.9L V64.0L V83.0L V63.0L V63.0L V63.0L V63.0L V63.0L V64.0L V84.0L V8
Note---------------------------
with 102 mm Outside Diameter Bearing(s)
with 102 mm Outside Diameter Bearing(s)
with 102 mm Outside Diameter Bearing(s)
with 102 mm Outside Diameter Bearing(s)
with 102 mm Outside Diameter Bearing(s)
with 102 mm Outside Diameter Bearing(s)
---------------
with 102 mm Outside Diameter Bearing(s)
with 102 mm Outside Diameter Bearing(s)

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.6/5

Based on 5 reviews

560%
440%
30%
20%
10%

AutoMom_2019_72

11/25/2025

My ABS light was on, and replacing this hub assembly cleared the code and fixed the issue. The steering feels more responsive too. Big improvement over the old one.

Steve_DIYer_486

02/03/2026

Got here in two days, which was great. The install went smoothly, no issues at all with fitment on my SQ5. Solid part, fast shipping, couldn't be happier.

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

Torque values differ by vehicle and fastener. Use the vehicle manufacturer’s specification rather than a general value, as incorrect torque may affect bearing operation.

Alignment may be advisable if suspension or steering components are disturbed during the repair. Follow the vehicle service procedure and check alignment if the vehicle pulls or the steering wheel is off-center.