2019-2023 Toyota RAV4 2.5L L4 | 2 PC Front Wheel Bearing | 435500R060/513448 - PHILTOP

2019-2023 Toyota RAV4 2.5L L4 | 2 PC Front Wheel Bearing | 435500R060/513448 - PHILTOP

Triple-Lip Seal

Front

AISI 52100

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6955WBR189FUS

Specifications

Brand
PHILTOP
ABS Type
Magnetic Ring
Lug Count
5
Position
Front
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front Wheel Hub and Bearing Assembly - 513448,Installation Instructions
Bolt Pattern
5 X 4.5
Surface Finish
Polished, Rust Protected
Wheel Stud Size
M12*1.5
Flange Offset
2.07 in/52.5 mm
Warranty Period
2-Year
OE Number
435500R060,4355033070
Part Number
513448,HA590759,WE61875,91668839
Quantity
2

Highlights

  • Compatibility: Front Wheel Bearing and Hub Assembly for 2019-2023 Toyota RAV4 AWD/FWD, 2020-2023 Toyota Camry FWD, 2018-2019 2024 Toyota Camry, 2021-2023 Toyota Venza, 2020-2023 Toyota Camry AWD, 2021-2024 Lexus ES250, 2021 Toyota Avalon AWD/FWD.
  • Wheel Hub Num: 4355006010, 513448, WE61875, 435500R060, HA590759, 4355033070, BR931105, HA590757.
  • Superior Quality: Our wheel hubs are made of high quality materials and have the same performance as the original equipment. In addition, the front wheel bearing hub assembly is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
  • Recovery Performance: Wheel bearings support the gravity of the entire body and precisely guide the wheel rotation. High-quality wheel hub assemblies allow you to drive your vehicle safely and smoothly.
  • Please Note: If you do not have an installation manual or are not skilled enough to install wheel bearings, it is recommended that you seek assistance from a qualified mechanic.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2021 - 20242021 - 20232023 - 202420242021 - 20242021 - 2024202120212018 - 20202018 - 20242018 - 20242020 - 20242018 - 20242018 - 20242019 - 20232019202120192021201920212021201920212019 - 20232019 - 20232021 - 20232019 - 20232019 - 20232021 - 20232021 - 202320232021 - 2023
MakeLexusLexusLexusLexusLexusLexusToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelES250ES250ES250ES250ES250ES250AvalonAvalonCamryCamryCamryCamryCamryCamryRAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4RAV4VenzaVenzaVenzaVenza
TrimBaseF SportF Sport DesignF Sport HandlingLuxuryUltra LuxuryLimitedXLELLESESE NightshadeXLEXSEAdventureHybrid LEHybrid LEHybrid LimitedHybrid LimitedHybrid XLEHybrid XLEHybrid XLE PremiumHybrid XSEHybrid XSELELimitedTRD Off-RoadXLEXLE PremiumLELimitedNightshadeXLE
Engine2.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L4
Note---------------------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

PHILTOPPT

Reviews

4.4/5

Based on 5 reviews

560%
420%
320%
20%
10%

Jason_Trucks_82

12/19/2025

Super easy to bolt on, and the delivery was incredibly fast. Fit my Camry perfectly. No complaints here, just smooth sailing.

DIY_Karen_979

01/06/2026

The annoying wheel noise is gone, and my Lexus handles so much better now. It's quiet and smooth. Definitely worth the purchase.

FAQS

Warranty coverage and duration may vary by product. For specific warranty period details by product category, please refer to our Warranty & Returns Policy page. Damage related to incorrect fitment, installation or other vehicle problems may require further review.

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

Possible signs include humming or grinding that changes with vehicle speed, wheel looseness, vibration, or an ABS warning. Similar symptoms can have other causes, so an inspection is recommended.