[Compatibility] 515032 Pair Wheel Hub Bearing Assembly fit for 1997-2004 Dakota, 1999-2003 Durango
[Superior Quality] Front wheel bearing hub assembly are made of high quality materials and have the same performance as the original equipment. In addition, the wheel hubs is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
[Recovery Performance] PHILTOP hub bearings enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. Bearing assembly can provide you with a smooth and quiet driving environment, enhancing your driving experience.
[Installation] Front Wheel hubs excellent assembly performance, precise overall structure, easy and quick installation.
[Customer Service] PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.
Confirm the vehicle, position, drive type and ABS compatibility.
Compare the mounting holes, splines and sensor configuration with the original part.
Prepare a press or puller and the vehicle-specific torque specifications.
Park on level ground, chock the wheels and support the vehicle with jack stands.
Installation Steps
Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.
After Installation
Rotate the wheel and check for noise, resistance or play.
Confirm proper brake operation and make sure the ABS light is off.
Perform a low-speed road test and check for vibration, steering pull or unusual noise.
Retorque after approximately 100 km when required by the vehicle manufacturer.
Critical Installation Notes
Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
Start Bolts by Hand: Thread bolts two or three turns before using power tools.
Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.
Product Video
Product Description
Reviews
4.7/5
Based on 3 reviews
5
67%
4
33%
3
0%
2
0%
1
0%
M
Mike KellyMike Kelly
12/23/2023
Verified buyer
High quality machining. Studs, hub, bearings true to size.Amazingly low priced assembly. Cost of two cheaper than most parts stores price for one.This is the way to go when replacing front hub bearings for the DIY mechanic. Simple remove and replace of assembly rather than fighting with removing and replacing the bearing alone.Great product. Excellent value.
M
Mike from Texas_122
10/28/2025
The machining on these is top-notch. Feels like a really quality part, especially for what I paid. My Durango handles like it's brand new again. Excellent value.
FAQS
Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.
Torque values differ by vehicle and fastener. Use the vehicle manufacturer’s specification rather than a general value, as incorrect torque may affect bearing operation.
Alignment may be advisable if suspension or steering components are disturbed during the repair. Follow the vehicle service procedure and check alignment if the vehicle pulls or the steering wheel is off-center.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
1999-2003 Dodge Durango 3.9L/4.7L | 2 PC Front RWD Wheel Bearing 515032 - PHILTOP
Triple-Lip Seal
Front
RWD
SKU:
4189WBK304ZUS
4.7
$86.84$8684
Check if this fits your vehicle
Select a vehicle to check this product.
Drive Type
RWD
Lug Count
6
Position
Front
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front Wheel Hub and Bearing Assembly - 515032,Installation Instructions
Bolt Pattern
6 X 4.5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.3 in
[Compatibility] 515032 Pair Wheel Hub Bearing Assembly fit for 1997-2004 Dakota, 1999-2003 Durango
[Superior Quality] Front wheel bearing hub assembly are made of high quality materials and have the same performance as the original equipment. In addition, the wheel hubs is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
[Recovery Performance] PHILTOP hub bearings enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. Bearing assembly can provide you with a smooth and quiet driving environment, enhancing your driving experience.
[Installation] Front Wheel hubs excellent assembly performance, precise overall structure, easy and quick installation.
[Customer Service] PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.
4.7
3 reviews
5 star: 2
4 star: 1
Compatible Vehicles
Check if this fits your vehicle
Year
Make
Model
Trim
Engine
Notes
1997 - 2002
Dodge
Dakota
Base
2.5L L4
2-Wheel ABS;Rear-Wheel Drive
2004
Dodge
Dakota
Base
3.7L V6
2-Wheel ABS;Rear-Wheel Drive
1997 - 2003
Dodge
Dakota
Base
3.9L V6
2-Wheel ABS;Rear-Wheel Drive
2000 - 2003
Dodge
Dakota
Base
4.7L V8
2-Wheel ABS;Rear-Wheel Drive
1997 - 1999
Dodge
Dakota
Base
5.2L V8
2-Wheel ABS;Rear-Wheel Drive
1998 - 2003
Dodge
Dakota
R/T
5.9L V8
2-Wheel ABS;Rear-Wheel Drive
1997 - 2001
Dodge
Dakota
SLT
2.5L L4
2-Wheel ABS;Rear-Wheel Drive
2004
Dodge
Dakota
SLT
3.7L V6
2-Wheel ABS;Rear-Wheel Drive
1997 - 2003
Dodge
Dakota
SLT
3.9L V6
2-Wheel ABS;Rear-Wheel Drive
2000 - 2004
Dodge
Dakota
SLT
4.7L V8
2-Wheel ABS;Rear-Wheel Drive
1997 - 1999
Dodge
Dakota
SLT
5.2L V8
2-Wheel ABS;Rear-Wheel Drive
2000 - 2003
Dodge
Dakota
SLT
5.9L V8
2-Wheel ABS;Rear-Wheel Drive
2004
Dodge
Dakota
SLT Plus
3.7L V6
2-Wheel ABS;Rear-Wheel Drive
2004
Dodge
Dakota
SLT Plus
4.7L V8
2-Wheel ABS;Rear-Wheel Drive
2004
Dodge
Dakota
SXT
3.7L V6
2-Wheel ABS;Rear-Wheel Drive
2002
Dodge
Dakota
SXT
3.9L V6
2-Wheel ABS;Rear-Wheel Drive
1997 - 2002
Dodge
Dakota
Sport
2.5L L4
2-Wheel ABS;Rear-Wheel Drive
2004
Dodge
Dakota
Sport
3.7L V6
2-Wheel ABS;Rear-Wheel Drive
1997 - 2003
Dodge
Dakota
Sport
3.9L V6
2-Wheel ABS;Rear-Wheel Drive
2000 - 2004
Dodge
Dakota
Sport
4.7L V8
2-Wheel ABS;Rear-Wheel Drive
1997 - 1999
Dodge
Dakota
Sport
5.2L V8
2-Wheel ABS;Rear-Wheel Drive
2000 - 2003
Dodge
Dakota
Sport
5.9L V8
2-Wheel ABS;Rear-Wheel Drive
2004
Dodge
Dakota
Sport Plus
3.7L V6
2-Wheel ABS;Rear-Wheel Drive
2004
Dodge
Dakota
Sport Plus
4.7L V8
2-Wheel ABS;Rear-Wheel Drive
1999
Dodge
Durango
Base
3.9L V6
2-Wheel ABS;Rear-Wheel Drive
2000 - 2001
Dodge
Durango
Base
4.7L V8
2-Wheel ABS;Rear-Wheel Drive
1999 - 2000
Dodge
Durango
Base
5.2L V8
2-Wheel ABS;Rear-Wheel Drive
1999 - 2001
Dodge
Durango
Base
5.9L V8
2-Wheel ABS;Rear-Wheel Drive
1999
Dodge
Durango
SLT
3.9L V6
2-Wheel ABS;Rear-Wheel Drive
2000 - 2003
Dodge
Durango
SLT
4.7L V8
2-Wheel ABS;Rear-Wheel Drive
1999 - 2000
Dodge
Durango
SLT
5.2L V8
2-Wheel ABS;Rear-Wheel Drive
1999 - 2003
Dodge
Durango
SLT
5.9L V8
2-Wheel ABS;Rear-Wheel Drive
1999
Dodge
Durango
SLT Plus
3.9L V6
2-Wheel ABS;Rear-Wheel Drive
2000
Dodge
Durango
SLT Plus
4.7L V8
2-Wheel ABS;Rear-Wheel Drive
2002 - 2003
Dodge
Durango
SLT Plus
4.7L V8
2-Wheel ABS;Rear-Wheel Drive
1999 - 2000
Dodge
Durango
SLT Plus
5.2L V8
2-Wheel ABS;Rear-Wheel Drive
1999 - 2000
Dodge
Durango
SLT Plus
5.9L V8
2-Wheel ABS;Rear-Wheel Drive
2002 - 2003
Dodge
Durango
SLT Plus
5.9L V8
2-Wheel ABS;Rear-Wheel Drive
2003
Dodge
Durango
SXT
4.7L V8
2-Wheel ABS;Rear-Wheel Drive
2003
Dodge
Durango
SXT
5.9L V8
2-Wheel ABS;Rear-Wheel Drive
2000
Dodge
Durango
Sport
4.7L V8
2-Wheel ABS;Rear-Wheel Drive
2002 - 2003
Dodge
Durango
Sport
4.7L V8
2-Wheel ABS;Rear-Wheel Drive
2000
Dodge
Durango
Sport
5.2L V8
2-Wheel ABS;Rear-Wheel Drive
2000
Dodge
Durango
Sport
5.9L V8
2-Wheel ABS;Rear-Wheel Drive
2002 - 2003
Dodge
Durango
Sport
5.9L V8
2-Wheel ABS;Rear-Wheel Drive
Product Specifications
Brand
PHILTOP
Drive Type
RWD
Lug Count
6
Position
Front
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front Wheel Hub and Bearing Assembly - 515032,Installation Instructions
Confirm the vehicle, position, drive type and ABS compatibility.
Compare the mounting holes, splines and sensor configuration with the original part.
Prepare a press or puller and the vehicle-specific torque specifications.
Park on level ground, chock the wheels and support the vehicle with jack stands.
Installation Steps
Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.
After Installation
Rotate the wheel and check for noise, resistance or play.
Confirm proper brake operation and make sure the ABS light is off.
Perform a low-speed road test and check for vibration, steering pull or unusual noise.
Retorque after approximately 100 km when required by the vehicle manufacturer.
Critical Installation Notes
Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
Start Bolts by Hand: Thread bolts two or three turns before using power tools.
Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.
Product Video
Product Description
Reviews
4.7/5
Based on 3 reviews
5
67%
4
33%
3
0%
2
0%
1
0%
M
Mike KellyMike Kelly
Dec 23,2023
Verified buyer
High quality machining. Studs, hub, bearings true to size.Amazingly low priced assembly. Cost of two cheaper than most parts stores price for one.This is the way to go when replacing front hub bearings for the DIY mechanic. Simple remove and replace of assembly rather than fighting with removing and replacing the bearing alone.Great product. Excellent value.
M
Mike from Texas_122
Oct 28,2025
The machining on these is top-notch. Feels like a really quality part, especially for what I paid. My Durango handles like it's brand new again. Excellent value.
FAQS
Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.
Torque values differ by vehicle and fastener. Use the vehicle manufacturer’s specification rather than a general value, as incorrect torque may affect bearing operation.
Alignment may be advisable if suspension or steering components are disturbed during the repair. Follow the vehicle service procedure and check alignment if the vehicle pulls or the steering wheel is off-center.