2003-2005 Dodge Ram 2500 5.7L V8 | 2 PC Front 4WD Wheel Bearing | 5103507AB/515061 - PHILTOP

2003-2005 Dodge Ram 2500 5.7L V8 | 2 PC Front 4WD Wheel Bearing | 5103507AB/515061 - PHILTOP

Triple-Lip Seal

Front

4WD

4.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1259WBR1660US

Specifications

Brand
PHILTOP
ABS Type
Speed Sensor
Drive Type
4WD
Lug Count
8
Position
Front
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front Wheel Hub and Bearing Assembly - 515061,Installation Instructions
Bolt Pattern
8 X 6.5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
4.5 in
Wheel Stud Size
9/16"x18 Unf
Flange Offset
2.15 in/54.6 mm
Flange Diameter
8.08 in/205.2 mm
Brake Pilot Diameter
4.81 in/122.3 mm
Warranty Period
2-Year
OE Number
5103507AB,5103507AA
Part Number
515061,HA590032,7990168,40267010E,40267010,715061,BR930502,WE60976,H515061,NT515061,BTF1086C,102005,BTD5106,930636,DL515061,94232009,4026701,G515061,FW761,HZF444BS3T
Quantity
2

Highlights

  • [Compatibility] 515061 Pair Wheel Hub Bearing Assembly fit for 2003-2005 Ram 2500, 2003-2005 Ram 3500
  • [Superior Quality] Front wheel bearing hub assembly are made of high quality materials and have the same performance as the original equipment. In addition, the wheel hubs is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
  • [Recovery Performance] PHILTOP hub bearings enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. Bearing assembly can provide you with a smooth and quiet driving environment, enhancing your driving experience.
  • [Installation] Front Wheel hubs excellent assembly performance, precise overall structure, easy and quick installation.
  • [Customer Service] PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year200320052003200520032003 - 20052003 - 200520032003 - 20052003 - 200520032003 - 20052003 - 200520032003 - 20052003 - 200520032003 - 20052003 - 20052003
MakeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodge
ModelRam 2500Ram 2500Ram 2500Ram 2500Ram 2500Ram 2500Ram 2500Ram 2500Ram 2500Ram 2500Ram 2500Ram 3500Ram 3500Ram 3500Ram 3500Ram 3500Ram 3500Ram 3500Ram 3500Ram 3500
TrimLaramieLaramieLaramieLaramieLaramieSLTSLTSLTSTSTSTLaramieLaramieLaramieSLTSLTSLTSTSTST
Engine5.7L V85.7L V85.9L L65.9L L68.0L V105.7L V85.9L L68.0L V105.7L V85.9L L68.0L V105.7L V85.9L L68.0L V105.7L V85.9L L68.0L V105.7L V85.9L L68.0L V10
Note
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.0/5

Based on 1 review

50%
4100%
30%
20%
10%

Eugene M.

08/05/2026

Verified buyer

All seems fine at a reasonable cost. Will see how long they perform at an acceptable level

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

A single bearing can often be replaced when only one side is worn. The condition of the bearing on the opposite side should also be checked because wear can vary by vehicle and use.

The design depends on the application. Compare the product type and images with the original part before installation; press-in bearings generally require suitable shop tools.

2003-2005 Dodge Ram 2500 Wheel Bearing 2 PC Front 4WD | 5103507AB | PHILTOP