2000-2002 Dodge Ram 2500 5.9L/8.0L | 2 PC Front 4WD Wheel Bearing | 05015282AA/515063 - PHILTOP

2000-2002 Dodge Ram 2500 5.9L/8.0L | 2 PC Front 4WD Wheel Bearing | 05015282AA/515063 - PHILTOP

Triple-Lip Seal

Front

4WD

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
4394WBR165WUS

Specifications

Brand
PHILTOP
ABS Type
Speed Sensor
Drive Type
4WD
Lug Count
8
Position
Front
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front Wheel Hub and Bearing Assembly - 515063,Installation Instructions
Bolt Pattern
8x6.5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
4.5 in
Flange Offset
2.14 in/54.3 mm
Flange Diameter
8.08 in/205.2 mm
Brake Pilot Diameter
4.81 in/122.2 mm
Warranty Period
2-Year
OE Number
05015282AA,5015282AA,5015119AA,5015118AA
Part Number
515063,HA590203,7990170,40267011E,40267011,WE60989,BR930203,715063,WH515063,H515063,NT515063,V2505282AA,G515063,BTF1086B1,BTD5105,BTF1086B,BTF1086A,200795,PT515063,FW763,HZF441BS3T
Quantity
2

Highlights

  • [Exact Replacement] 515063 Front Wheel Bearing and Hub Assembly fit for 2000-2002 Dodge Ram 2500 4WD, 2000-2002 Dodge Ram 3500 4WD, 2001-2002 Dodge Ram 3500 RWD
  • [Superior Quality] Our wheel bearing hub assembly are made of high quality materials and have the same performance as the original equipment. In addition, the wheel hubs is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
  • [Long lifespan] Brand new wheel hub assemblies and studs with rust and corrosion protected surface finish, making it has longer bearing life. Better seal design and triple oil seal, which lasts and minimizes noise and vibration and vibration also keeping moisture and other contaminants out.
  • [OE Number] 515063, HA590203, BR930203, 05015282AA, WE60989, 5015282AA, WH515063, 7990170, 40267011E, 200795, PT515063, 5015119AA, 5015118AA, 40267011, FW763, HZF441BS3T, 715063, NT515063, V2505282AA, G515063, BTF1086B1, BTF1086B, BTF1086A, BTD5105, H515063
  • [Customer Service] PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2000 - 200120022000 - 200120022000 - 200120022000 - 20022000 - 20022000 - 2002
MakeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodge
ModelRam 2500Ram 2500Ram 2500Ram 2500Ram 2500Ram 2500Ram 3500Ram 3500Ram 3500
TrimBaseBaseBaseBaseBaseBaseBaseBaseBase
Engine5.9L L65.9L L65.9L V85.9L V88.0L V108.0L V105.9L L65.9L V88.0L V10
Note
4-Wheel ABS;Four-Wheel Drive
Four-Wheel Drive
4-Wheel ABS;Four-Wheel Drive
Four-Wheel Drive
4-Wheel ABS;Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

5.0/5

Based on 2 reviews

5100%
40%
30%
20%
10%

CarGuy_John_722

02/05/2026

That annoying squeal from my front wheel is finally gone thanks to these. It's so nice to have a quiet ride again. Fixed the issue perfectly on my Ram 3500.

DIY_Karen_208

02/23/2026

Super impressed with how fast these got here. I needed them for my 3500 and they showed up the next day! Installation was smooth sailing too, fit like a glove.

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

Torque values differ by vehicle and fastener. Use the vehicle manufacturer’s specification rather than a general value, as incorrect torque may affect bearing operation.

Alignment may be advisable if suspension or steering components are disturbed during the repair. Follow the vehicle service procedure and check alignment if the vehicle pulls or the steering wheel is off-center.