2006-2009 Dodge Durango 4.7L/5.7L/3.7L | 2 PC Front Wheel Bearing | 52104499AD/513271 - PHILTOP

2006-2009 Dodge Durango 4.7L/5.7L/3.7L | 2 PC Front Wheel Bearing | 52104499AD/513271 - PHILTOP

Triple-Lip Seal

Front

AISI 52100

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8827WBK525VUS

Specifications

Brand
PHILTOP
ABS Type
Speed Sensor
Lug Count
5
Position
Front
Flange Bolt Hole Count
3
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front Wheel Hub and Bearing Assembly - 513271,Installation Instructions
Bolt Pattern
5 X 5.5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
4.1 in
Wheel Stud Size
9/16"x18 Unf
Flange Offset
1.92 in/48.7 mm
Flange Diameter
7.2 in/183.0 mm
Brake Pilot Diameter
3.09 in/78.4 mm
Warranty Period
2-Year
OE Number
52104499AD,52104499AE,52104499AI,52104499AG,52104499AH
Part Number
513271,HA590244,7200017,BR930523,H513271,713271,NT513271,BAR5013BB,BAR5013BC,40267021
Quantity
2

Highlights

  • Fitment: PHILTOP Wheel Hub and Bearing Assembly for 2007-2013 Chevrolet Silverado 1500 RWD, 2007-2013 GMC Sierra 1500 RWD, 2007-2014 Chevrolet Tahoe RWD, 2007-2014 Chevrolet Suburban 1500 RWD, 2007-2014 GMC Yukon/Yukon XL 1500 RWD, 2007-2013 Chevrolet Avalanche RWD, 2007-2014 Cadillac Escalade RWD, 2008-2014 Cadillac Escalade ESV RWD.
  • Wheel Hubs Parameter: Anti Lock Brake Sensor Included : Yes, Wheel Stud Quantity : 6.
  • Long Service Life: Wheel bearing assembly is made of high-quality bearing steel, the parts have the greatest anti-corrosion capacity with fine workmanship and strong bearing capacity.
  • Excellent Performance: Application-specific advanced raceway design reduces stress, rotation and heat on components.The new wheel hub and bearing assembly restores the vehicle's performance well.
  • Simple Installation: Hub bearings are manufactured to OE standards to ensure consistency in shape and function with the original factory.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2007 - 20092007 - 200920092006 - 20082006 - 20082006 - 20092006 - 200920092009200920092006 - 20092006 - 20092006 - 20092006 - 20082006 - 20082007
MakeChryslerChryslerChryslerDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodge
ModelAspenAspenAspenDurangoDurangoDurangoDurangoDurangoDurangoDurangoDurangoDurangoDurangoDurangoDurangoDurangoDurango
TrimLimitedLimitedLimited HybridAdventurerAdventurerLimitedLimitedLimited HybridSESESESLTSLTSLTSXTSXTSXT
Engine4.7L V85.7L V85.7L V84.7L V85.7L V84.7L V85.7L V85.7L V83.7L V64.7L V85.7L V83.7L V64.7L V85.7L V83.7L V64.7L V85.7L V8
Note-----------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

PHILTOPPT

Reviews

4.5/5

Based on 6 reviews

567%
417%
317%
20%
10%

Steve_DIYer_11

03/30/2026

Solid construction and a great price point. My truck feels much more stable now, and I saved a good chunk of change compared to the dealership price.

CarGuy_John_735

11/18/2025

These went on without any issues and got here super quick. I was impressed with how fast they shipped out. Great value and service.

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

Possible signs include humming or grinding that changes with vehicle speed, wheel looseness, vibration, or an ABS warning. Similar symptoms can have other causes, so an inspection is recommended.

Package contents vary by part number. Please check the product images and specifications to confirm whether the hub, ABS sensor, axle nut, or other hardware is included.