2004-2008 Chevrolet Colorado 2.8L | 2 PC Front RWD Wheel Bearing | 15176998/515109 - PHILTOP

2004-2008 Chevrolet Colorado 2.8L | 2 PC Front RWD Wheel Bearing | 15176998/515109 - PHILTOP

Triple-Lip Seal

Front

RWD

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7298WBR145WUS

Specifications

Brand
PHILTOP
ABS Type
Speed Sensor
Drive Type
RWD
Lug Count
6
Position
Front
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
2x Front Wheel Hub and Bearing Assembly - 515108/515109,Installation Instructions
Bolt Pattern
6 X 5.5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.35/4.49 in
Wheel Stud Size
M12x1.5
Flange Offset
67.3/55.1 mm
Warranty Period
2-Year
OE Number
15176998,15176997,15170661,15170662
Part Number
515109,515108,HA590061,HA590053,WE61766,WE61767,40766012,40766013,BR930702,715108,NT515108,FW318,715109,NT515109,H515108,FW296,H515109,106108,106109,951918,7300400,102158,102159,40766012E,7300401
Quantity
2

Highlights

  • Compatibility: Wheel Bearing and Hub Assembly for 2004-2008 Chevrolet Colorado RWD, 2004-2008 GMC Canyon RWD, 2007-2008 Isuzu i-370 RWD.
  • Wheel Hub Num: 515108, BR930702, 15176998, 15170661, HA590061, BR930307, NT515108, 715108, FW318, H515108.
  • Superior Quality: Our wheel hubs are made of high quality materials and have the same performance as the original equipment. In addition, the wheel bearing hub assembly is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
  • Recovery Performance: Wheel bearings support the gravity of the entire body and precisely guide the wheel rotation. High-quality wheel hub assemblies allow you to drive your vehicle safely and smoothly.
  • Please Note: If you do not have an installation manual or are not skilled enough to install wheel bearings, it is recommended that you seek assistance from a qualified mechanic.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20042004200420062007 - 200820042007 - 200820062007 - 200820062007 - 20082004 - 20052004 - 20052004 - 20052004 - 200520062007 - 200820062007 - 20082004 - 20052004 - 20052004 - 20052004 - 2005200420062007 - 20082004200420062007 - 2008200420062007 - 2008200820062007 - 200820062007 - 200820062007 - 20082004 - 20052004 - 20052004 - 20052004 - 20052004 - 20052004 - 20052007 - 2008
MakeChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCIsuzu
ModelColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyoni-370
TrimBaseBaseLSLSLSLSLSLTLTLTLTSportSportSport LSSport LSWTWTWTWTZ71Z71Z71 LSZ71 LSSLSLSLSLSLESLESLESLESLESLESLTSLTSLTWTWTWTWTZ71 FleetZ71 FleetZ71 SLZ71 SLZ71 SLEZ71 SLELS
Engine2.8L L43.5L L52.8L L42.8L L42.9L L43.5L L53.7L L52.8L L42.9L L43.5L L53.7L L52.8L L43.5L L52.8L L43.5L L52.8L L42.9L L43.5L L53.7L L52.8L L43.5L L52.8L L43.5L L52.8L L42.8L L42.9L L43.5L L52.8L L42.8L L42.9L L43.5L L53.5L L53.7L L52.9L L43.5L L53.7L L52.8L L42.9L L43.5L L53.7L L52.8L L43.5L L52.8L L43.5L L52.8L L43.5L L53.7L L5
Note----------------------------------------------
Rear-Wheel Drive;with Sport (ZQ8) Suspension

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

PHILTOPPT

Reviews

4.8/5

Based on 8 reviews

575%
425%
30%
20%
10%

Customer photos and videos

Camperman

06/27/2026

Verified buyer

Great replacement part! The hardest step was getting the old wheel hubs off the truck. These made a world of difference with turns and overall stability of steering the truck. Mine is an 07 and definitely needed a new set. I added some paint to hopefully prevent rust but I’m sure salted winter roads will have something to say about that. The sensor wire clips (that hold the wire to the truck) are a little different but they work. The sensor plug itself is the exact same so no issues. Would recommend if you’re looking for some wheel hubs.

Elizabeth Guedry

08/12/2025

Verified buyer

It was exactly what my husband ordered for perfectly

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

Some bearings have a magnetic encoder or sealing side that must face a particular direction. Follow the vehicle service information and any markings supplied with the part.

Some vehicle manufacturers specify a one-time-use axle nut. Check the service procedure for your vehicle and use new hardware when required.