2009-2010 Ford F-150 4.6L V8/5.4L V8 | 1 PC Front RWD Wheel Bearing | 9L342B6963BB/515117 - PHILTOP

2009-2010 Ford F-150 4.6L V8/5.4L V8 | 1 PC Front RWD Wheel Bearing | 9L342B6963BB/515117 - PHILTOP

Triple-Lip Seal

Front

RWD

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7725WBK1596US

Specifications

Brand
PHILTOP
ABS Type
Speed Sensor
Drive Type
RWD
Lug Count
6
Position
Front
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
1x Front Wheel Hub and Bearing Assembly - 515117,Installation Instructions
Bolt Pattern
6 X 5.31
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.9 in
Wheel Stud Size
M14*2.0
Flange Offset
1.8 in/45.6 mm
Flange Diameter
7.2 in/183.0 mm
Brake Pilot Diameter
3.54 in/90.0 mm
Warranty Period
2-Year
OE Number
9L342B6963BB,9L3Z1104E,9L3Z1104B
Part Number
515117,SP550216,H515117,BR930761,NT515117,HUB147,G515117
Quantity
1

Highlights

  • Compatibility: 515117 x1 Front Wheel hub assembly compatible with 2009-2010 Ford F-150 RWD
  • Superior Quality: Our wheel bearing hub assembly are made of high quality materials and have the same performance as the original equipment. In addition, the wheel hubs is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
  • Recovery Performance: PHILTOP hub bearings enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. Wheel hub bearing can provide you with a smooth and quiet driving environment, enhancing your driving experience.
  • Installation: Wheel hubs excellent assembly performance, precise overall structure, easy and quick installation.
  • Customer Service: PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010201020102009 - 20102009 - 20102009 - 20102009 - 20102009 - 20102009 - 20102009 - 20102009 - 2010
MakeFordFordFordFordFordFordFordFordFordFordFord
ModelF-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150
TrimFX2FX2Harley-Davidson EditionKing RanchLariatPlatinumSTXXLXLXLTXLT
Engine4.6L V85.4L V85.4L V85.4L V85.4L V85.4L V84.6L V84.6L V85.4L V84.6L V85.4L V8
Note
6 Stud Hub;From 7/23/2008;Rear-Wheel Drive;w/o Heavy Duty Package
6 Stud Hub;From 7/23/2008;Rear-Wheel Drive;w/o Heavy Duty Package
6 Stud Hub;From 7/23/2008;Rear-Wheel Drive;w/o Heavy Duty Package
6 Stud Hub;From 7/23/2008;Rear-Wheel Drive;w/o Heavy Duty Package
6 Stud Hub;From 7/23/2008;Rear-Wheel Drive;w/o Heavy Duty Package
6 Stud Hub;From 7/23/2008;Rear-Wheel Drive;w/o Heavy Duty Package
6 Stud Hub;From 7/23/2008;Rear-Wheel Drive;w/o Heavy Duty Package
6 Stud Hub;From 7/23/2008;Rear-Wheel Drive;w/o Heavy Duty Package
6 Stud Hub;From 7/23/2008;Rear-Wheel Drive;w/o Heavy Duty Package
6 Stud Hub;From 7/23/2008;Rear-Wheel Drive;w/o Heavy Duty Package
6 Stud Hub;From 7/23/2008;Rear-Wheel Drive;w/o Heavy Duty Package

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.7/5

Based on 3 reviews

567%
433%
30%
20%
10%

Kenny

07/23/2023

Verified buyer

Good

CarGuy_John_795

12/13/2025

Wow, this hub assembly was a breeze to install. Everything lined up perfectly, and it bolted right on. Plus, it got here way faster than I expected, which was a huge relief.

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

Package contents vary by part number. Please check the product images and specifications to confirm whether the hub, ABS sensor, axle nut, or other hardware is included.

A single bearing can often be replaced when only one side is worn. The condition of the bearing on the opposite side should also be checked because wear can vary by vehicle and use.