2012-2015 Nissan Armada 5.6L V8 | 1 PC Front 4WD Wheel Bearing 402029FG0A/515155 - PHILTOP

2012-2015 Nissan Armada 5.6L V8 | 1 PC Front 4WD Wheel Bearing 402029FG0A/515155 - PHILTOP

Triple-Lip Seal

Front

4WD

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8990WBK6260US

Specifications

Brand
PHILTOP
ABS Type
Speed Sensor
Drive Type
4WD
Lug Count
6
Position
Front
Flange Bolt Hole Count
3
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
1x Front Wheel Hub and Bearing Assembly - 515155,Installation Instructions
Bolt Pattern
6 X 5.5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.5 in
Wheel Stud Size
M12*1.25
Flange Offset
1.78 in/45.3 mm
Flange Diameter
6.73 in/171.0 mm
Brake Pilot Diameter
3.54 in/89.9 mm
Warranty Period
2-Year
OE Number
402029FG0A,402029GG0B,402029FF0A,402029GG0A
Part Number
515155,515156,SP500705,WE61580,40242008,BR930886,103218,MB30323,103168,TXF30323,G30323,7503230,1411556357,94425348
Quantity
1

Highlights

  • Fitment: Front Wheel hub assembly compatible with 2012-2015 TITAN 4WD, 2012-2015 Armada 4WD
  • Superior Quality: Our wheel bearing hub assembly are made of high quality materials and have the same performance as the original equipment. In addition, the wheel hubs is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
  • Recovery Performance: PHILTOP hub bearings enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. Wheel hub bearing can provide you with a smooth and quiet driving environment, enhancing your driving experience.
  • Installation: Wheel hubs excellent assembly performance, precise overall structure, easy and quick installation.
  • Customer Service: PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2012 - 20132014 - 20152012 - 20132014 - 20152012 - 20132014 - 2015201220132014 - 2015201220132014 - 2015201220132014 - 2015201220132014 - 2015
MakeNissanNissanNissanNissanNissanNissanNissanNissanNissanNissanNissanNissanNissanNissanNissanNissanNissanNissan
ModelArmadaArmadaArmadaArmadaArmadaArmadaTITANTITANTITANTITANTITANTITANTITANTITANTITANTITANTITANTITAN
TrimPlatinumPlatinumSLSLSVSVPRO-4XPRO-4XPRO-4XSSSSLSLSLSVSVSV
Engine5.6L V85.6L V85.6L V85.6L V85.6L V85.6L V85.6L V85.6L V85.6L V85.6L V85.6L V85.6L V85.6L V85.6L V85.6L V85.6L V85.6L V85.6L V8
Note
Four-Wheel Drive;From 12/2011
Four-Wheel Drive
Four-Wheel Drive;From 12/2011
Four-Wheel Drive
Four-Wheel Drive;From 12/2011
Four-Wheel Drive
Four-Wheel Drive
Four-Wheel Drive;From 12/2011
Four-Wheel Drive;To 11/2014
Four-Wheel Drive
Four-Wheel Drive;From 12/2011
Four-Wheel Drive;To 11/2014
Four-Wheel Drive
Four-Wheel Drive;From 12/2011
Four-Wheel Drive;To 11/2014
Four-Wheel Drive
Four-Wheel Drive;From 12/2011
Four-Wheel Drive;To 11/2014

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.5/5

Based on 2 reviews

550%
450%
30%
20%
10%

DaveTheMechanic_346

03/26/2026

This hub assembly is built tough. The materials feel great, and it's priced really well for what you get. Definitely a smart buy for my Titan.

Chris_GearHead_107

04/16/2026

I had to grab a couple of extra tools I didn't have at home to get this installed, but luckily I found them. The hub assembly itself is good quality for the price, just a heads-up on tools.

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

Some bearings have a magnetic encoder or sealing side that must face a particular direction. Follow the vehicle service information and any markings supplied with the part.

Some vehicle manufacturers specify a one-time-use axle nut. Check the service procedure for your vehicle and use new hardware when required.