2018-2020 Ford F-150 3.0L/3.5L/5.0L/2.7L/3.3L | 1 PC Front 4WD Wheel Bearing | JL3Z1104E/515177 - PHILTOP

2018-2020 Ford F-150 3.0L/3.5L/5.0L/2.7L/3.3L | 1 PC Front 4WD Wheel Bearing | JL3Z1104E/515177 - PHILTOP

Triple-Lip Seal

Front

4WD

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1596WBK166ZUS

Specifications

Brand
PHILTOP
ABS Type
Speed Sensor
Drive Type
4WD
Lug Count
6
Position
Front
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
1x Front Wheel Hub and Bearing Assembly - 515177,Installation Instructions
Bolt Pattern
6 X 5.31
Surface Finish
Polished, Rust Protected
Wheel Stud Size
M14*1.5
Flange Offset
1.8 in/45.74 mm
Warranty Period
2-Year
OE Number
JL3Z1104E
Part Number
515177,HA590800,MB40334,BR961016,G40334,94704848
Quantity
1

Highlights

  • Fitment: PHILTOP Wheel Hub Bearing Assembly for 2018-2020 Ford F-150 4WD.
  • Long Service Life: Wheel bearing assembly is made of high-quality bearing steel, the parts have the greatest anti-corrosion capacity with fine workmanship and strong bearing capacity.
  • Excellent Performance: Application-specific advanced raceway design reduces stress, rotation and heat on components.The new wheel hub and bearing assembly restores the vehicle's performance well.
  • Simple Installation: Hub bearings are manufactured to OE standards to ensure consistency in shape and function with the original factory.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 20202018 - 2020
MakeFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFord
ModelF-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150
TrimKing RanchKing RanchKing RanchLariatLariatLariatLariatLimitedPlatinumPlatinumPlatinumSSVSSVXLXLXLXLXLXLTXLTXLTXLTXLT
Engine3.0L V63.5L V65.0L V82.7L V63.0L V63.5L V65.0L V83.5L V63.0L V63.5L V65.0L V83.5L V65.0L V82.7L V63.0L V63.3L V63.5L V65.0L V82.7L V63.0L V63.3L V63.5L V65.0L V8
Note-----------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

Reviews

4.7/5

Based on 6 reviews

567%
433%
30%
20%
10%

Nick

03/03/2024

Verified buyer

I've installed these about a month ago and wanted to test drive them for a while before writing this review .. I have to say the quality is really nice and I was pleasantly surprised when I unboxed them. These are supper quiet and easy to install. They come with the abs sensor (which is very convenient) and did fit my 2006 Chevy Colorado perfectly.I thought I was only going to only receive the left side but received both sides instead (which was a great surprise)! So I went ahead and replaced them both :)Overall I have to say that for the price, you just won't find anything better than these. They are very well made, are a direct replacement and come complete .. all you have to do is remove the old ones and install these .. no modification necessary. I definitely recommend these hubs.

Customer

01/01/2024

Verified buyer

Easy installationQuality product

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

Keep the part clean, avoid impact through the rolling elements, use the correct pressing surface, and tighten fasteners to the specified torque. Professional installation is recommended if special tools are required.

Possible signs include humming or grinding that changes with vehicle speed, wheel looseness, vibration, or an ABS warning. Similar symptoms can have other causes, so an inspection is recommended.