2015-2017 Ford F-150 3.5L/5.0L/2.7L | 1 PC Front 4WD Wheel Bearing FL3Z1104H/515195 - PHILTOP

2015-2017 Ford F-150 3.5L/5.0L/2.7L | 1 PC Front 4WD Wheel Bearing FL3Z1104H/515195 - PHILTOP

Triple-Lip Seal

Front

4WD

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3580WBK6391US

Specifications

Brand
PHILTOP
ABS Type
Speed Sensor
Drive Type
4WD
Lug Count
6
Position
Front
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
1x Front Wheel Hub and Bearing Assembly - 515195,Installation Instructions
Bolt Pattern
6 X 5.31
Surface Finish
Polished, Rust Protected
Wheel Stud Size
M14*1.5
Flange Offset
1.79 in/45.5 mm
Warranty Period
2-Year
OE Number
FL3Z1104H,FL3Z1104C,FL3Z1104A
Part Number
515195,MB40325
Quantity
1

Highlights

  • [Exact Replacement] 515195 Front Wheel Bearing and Hub Assembly fit for 2015-2017 Ford F-150 4WD
  • [Superior Quality] Our wheel bearing hub assembly are made of high quality materials and have the same performance as the original equipment. In addition, the wheel hubs is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
  • [Long lifespan] Brand new wheel hub assemblies and studs with rust and corrosion protected surface finish, making it has longer bearing life. Better seal design and triple oil seal, which lasts and minimizes noise and vibration and vibration also keeping moisture and other contaminants out.
  • [OE Number] BR931007, 515195, FL3Z1104H, FL3Z1104F, FL3Z1104C, FL3Z1104A, FL3Z1104E, MB40325, TXF40325, 103328, G40325, HUB306, HUB286
  • [Customer Service] PHILTOP Wheel hub assembly meet OE quality standards and come with a 2 year warranty. If you have any questions about our products, please contact us 24 hours a day.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2015 - 20172015 - 20172015 - 20172015 - 20172015 - 20172016 - 20172015 - 20172015 - 20172016 - 20172016 - 20172015 - 20172015 - 20172015 - 20172015 - 20172015 - 20172015 - 2017
MakeFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFord
ModelF-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150
TrimKing RanchKing RanchLariatLariatLariatLimitedPlatinumPlatinumSSVSSVXLXLXLXLTXLTXLT
Engine3.5L V65.0L V82.7L V63.5L V65.0L V83.5L V63.5L V65.0L V83.5L V65.0L V82.7L V63.5L V65.0L V82.7L V63.5L V65.0L V8
Note----------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

5.0/5

Based on 2 reviews

5100%
40%
30%
20%
10%

SarahDrives_268

10/04/2025

For a 4WD F-150, this hub is a great deal. The construction feels robust, and it's a fraction of the cost of the dealership's part. Feels like I got a real bargain.

CarGuy_John_703

03/02/2026

This absolutely solved the wobbly wheel issue I was having. Feels way more secure and stable now. The difference after replacing the old worn-out one is night and day.

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

Some vehicle manufacturers specify a one-time-use axle nut. Check the service procedure for your vehicle and use new hardware when required.

Torque values differ by vehicle and fastener. Use the vehicle manufacturer’s specification rather than a general value, as incorrect torque may affect bearing operation.