2007-2021 Toyota Tundra 5.7L V8 | 1 PC Front 4WD Wheel Bearing | 435020C021/515202 - PHILTOP

2007-2021 Toyota Tundra 5.7L V8 | 1 PC Front 4WD Wheel Bearing | 435020C021/515202 - PHILTOP

Triple-Lip Seal

Front

4WD

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3460WBK6446US

Specifications

Brand
PHILTOP
ABS Type
Magnetic Ring
Drive Type
4WD
Lug Count
5
Position
Front
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
1x Front Wheel Hub and Bearing Assembly - 515202,Installation Instructions
Bolt Pattern
5 X
Surface Finish
Polished, Rust Protected
Wheel Stud Size
M14*1.5
Warranty Period
2-Year
OE Number
435020C021,435020C031,435700C010
Part Number
515202,H515103,WE60786,40644002,515103,BM500017,FW211,101979,P515103,0514194,696103,WH515103,WABM515103,FW7103,PT515103,7700012,29515103,40644002E,1411258933
Quantity
1

Highlights

  • Compatibility: Front Wheel Bearing and Hub Assembly for 2007-2021 Toyota Tundra 4WD, 2008-2022 Toyota Sequoia 4WD.
  • Wheel Hub Num: 435700C010, 950002, 515103, 515202, BR930981, H515103, 50002. Please refer to the Vehicle menu at the top of the list, select your vehicle's "Year, Make, Model" and click "Confirm" to make sure the wheel bearing fit your car.
  • Superior Quality: Our wheel hubs are made of high quality materials and have the same performance as the original equipment. In addition, the wheel bearing hub assembly is vehicle tested to ensure proper fit and excellent performance, thus extending the user's service life.
  • Recovery Performance: Wheel bearings support the gravity of the entire body and precisely guide the wheel rotation. High-quality wheel hub assemblies allow you to drive your vehicle safely and smoothly.
  • Please Note: If you do not have an installation manual or are not skilled enough to install wheel bearings, it is recommended that you seek assistance from a qualified mechanic.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2008 - 20222021 - 20222008 - 20222010 - 20122008 - 20092008 - 20222020 - 20222018 - 20222014 - 20212007 - 20132010 - 20132007 - 20092007 - 201320102007 - 20092007 - 2021202120102010 - 202120142014 - 20192014 - 20212007 - 20112010 - 20112014 - 20192007 - 20092007 - 20112014 - 20212015 - 20172019 - 20212021
MakeToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelSequoiaSequoiaSequoiaSequoiaSequoiaSequoiaSequoiaSequoiaTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundraTundra
TrimLimitedNightshadePlatinumSR5SR5SR5TRD ProTRD Sport1794 EditionBaseBaseBaseBaseLimitedLimitedLimitedNightshadePlatinumPlatinumSRSRSRSR5SR5SR5SR5SR5SR5TRD ProTRD ProTrail
Engine5.7L V85.7L V85.7L V84.6L V84.7L V85.7L V85.7L V85.7L V85.7L V84.0L V64.6L V84.7L V85.7L V84.6L V84.7L V85.7L V85.7L V84.6L V85.7L V84.0L V64.6L V85.7L V84.0L V64.6L V84.6L V84.7L V85.7L V85.7L V85.7L V85.7L V85.7L V8
Note
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD
4WD

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.6/5

Based on 9 reviews

567%
422%
311%
20%
10%

arnold dunn

02/27/2026

Verified buyer

Fits great. Appears as good as oem.

Kelly_SUV_Life_583

03/11/2026

The grinding noise is history. This bearing was a direct replacement and works perfectly. My Sequoia feels much safer and quieter now.

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

The design depends on the application. Compare the product type and images with the original part before installation; press-in bearings generally require suitable shop tools.

Some bearings have a magnetic encoder or sealing side that must face a particular direction. Follow the vehicle service information and any markings supplied with the part.