2009-2012 Mazda CX-7 2.3L/2.5L | HS18 New A/C Compressor | OE#EG2161450G/98120 - PHILTOP

2009-2012 Mazda CX-7 2.3L/2.5L | HS18 New A/C Compressor | OE#EG2161450G/98120 - PHILTOP

PAG

HS18

R134a

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1182ACC5573US

Specifications

Brand
PHILTOP
Oil Type
Pag 46
Compressor Type
HS18
Belt Type
Serpentine
Refrigerant Type
R134a
Pulley Groove Count
6
Items Included
1x A/C Compressors & Clutches - 98120,1x Manual
Material
Aluminum Alloy Housing,Cast Iron Pulley,Stainless Steel Valve Plate
Power Source
‎Corded Electric
Voltage
12 V
Mounting Type
Tangent Mount
Clutch Diameter
4.7 in/119.38 mm
Maximum Working Pressure
22 bar
Warranty Period
2-Year
OE Number
EG2161450G,EG2161450D,EG2161450F,EG2161450E,EG2161K00C,L4500EG22B08
Part Number
98120,6512908,639128

Highlights

  • #128,905 in Automotive (See Top 100 in Automotive)
  • #188 in Automotive Replacement Air Conditioning Compressors
  • Ensures Fast Refrigeration And Defogging: ①Oil Type:PAG 46;②R-efrigerant Type:R134a;③Pulley Grooves: 6;④Pulley Diameter:4.7 inch ;⑤Compressor type:HS18;⑥Pulley type:Serpentine;⑦Clutch Included: Yes; ⑧Noise:<72 dB.Our air conditioning compressor supply Stable and Consistent Cooling, It ensures stable and consistent cooling throughout your drive.
  • Widely Compatible: PHILTOP AC Compressor with Clutch Compatible withCX-7 2009-2012.Please confirm your vehicle details and old part number before ordering.
  • Guaranteed Compatibility : Replaces OEM part numbers:EG2161450G,2022247,98120,6512908,EG2161450D,EG2161450F,EG2161450E,EG2161K00C,L4500EG22B08,639128,2022247AM,2021928R.Verify your vehicle info using the Suncentauto compatibility checker.
  • Fully Tested & Easy Installation: The ac compressor with clutch has been examined and tested carefully before its delivery. Air conditioning compressor is pre-filled with oil upon delivery, therefore, there is no need to add oil during initial use. Excessive oil addition may damage the ac compressor.
  • Low Noise & Low Fuel Consumption: AC compressor works excellent and has low noise with a better experience. With a lower load factor, low power will be input when driving at high speed, which increases fuel economy and makes operation smoothly.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2009 - 20122010 - 201220092010 - 20122009 - 20122011 - 2012
MakeMazdaMazdaMazdaMazdaMazdaMazda
ModelCX-7CX-7CX-7CX-7CX-7CX-7
TrimGrand TouringSVSportSportTouringTouring
Engine2.3L L42.5L L42.3L L42.5L L42.3L L42.5L L4
Note
w/ HS18 Compressor
w/ HS18 Compressor
w/ HS18 Compressor
w/ HS18 Compressor
w/ HS18 Compressor
w/ HS18 Compressor

How to Install?

Related Diagnostic Codes

  • P0530-A/C refrigerant pressure sensor circuit — inspect the sensor connector, wiring and refrigerant pressure.
  • P0531-Pressure sensor circuit range/performance — check the refrigerant charge, sensor signal and system pressure.
  • P0532–P0533-Pressure sensor circuit low/high input — inspect for wiring faults, refrigerant leaks, overcharging or excessive system pressure.
  • P0646-A/C compressor clutch relay control circuit low — check the relay, power supply, ground connection and related wiring.

These codes may relate to the A/C control system and do not necessarily indicate a faulty compressor. Perform a complete system diagnosis before replacement.

Checks Before Installation

  • Compare the new compressor with the original. Confirm the electrical connector, mounting holes, pulley specifications, and high- and low-pressure port locations match.
  • Check the connector terminals for damage, oxidation or corrosion.
  • Verify the correct refrigerant type, PAG oil type and oil quantity. Shipping oil may not meet the vehicle’s requirements.
  • Inspect the lines and condenser for leaks, blockage or metal contamination. Flush the system if the old compressor seized or failed internally.
  • Recover the refrigerant with approved equipment. Disconnect the battery and allow the engine to cool.

Installation Steps

  • Step-1: Recover the Refrigerant:Professionally recover the refrigerant. Do not release it into the atmosphere or mix different refrigerant types.
  • Step-2: Remove the Old Compressor:Photograph the original layout and label the high-pressure (H) and low-pressure (L) lines. Remove the belt, wiring and refrigerant lines, then seal all open ports immediately.
  • Step-3: Inspect and Clean the System:Check the lines, condenser, expansion valve and receiver-drier for debris or blockage. Flush or replace contaminated components as required.
  • Step-4: Prepare the New Compressor:Adjust the refrigerant oil to the vehicle manufacturer’s specified type and quantity. Do not mix different oil types.
  • Step-5: Install the Compressor:Hand-start the mounting bolts and tighten them diagonally to the specified torque. Install new oil-lubricated O-rings, then reconnect the wiring and H/L lines according to the labels.
  • Step-6: Evacuate and Recharge:Reinstall and tension the drive belt. Evacuate the system for at least 30 minutes, then charge the specified type and amount of refrigerant.

Product Description

PHILTOP AC CompressorAC Compressor

Reviews

4.4/5

Based on 5 reviews

560%
420%
320%
20%
10%

Steve_DIYer_260

12/14/2025

Super easy to bolt on, and it got here really quickly. My AC is blowing cold air now, so I'm happy. Great price for a great part.

Steve_DIYer_413

10/05/2025

Got this compressor installed quickly, and it arrived super fast. It was pretty much plug and play. Big thanks to the seller!

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

Possible causes include low refrigerant pressure, a fuse or relay issue, wiring, control logic, a pressure sensor, or clutch-related conditions. Diagnose the control circuit before replacing parts.

A/C compressor replacement usually requires refrigerant recovery, vacuum, measured charging, and contamination checks. Professional service is recommended when the required equipment or procedures are unavailable.