2006 Lincoln Zephyr 3.0L V6 | New A/C Compressor 6E5Z19D784A/68669 - PHILTOP

2006 Lincoln Zephyr 3.0L V6 | New A/C Compressor 6E5Z19D784A/68669 - PHILTOP

PAG

SP17

R134a

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6061ACC116AUS

Specifications

Brand
PHILTOP
Oil Type
Pag 46
Compressor Type
SP17
Belt Type
Multi-Groove Serpentine
Refrigerant Type
R134a
Pulley Groove Count
6
Items Included
1x A/C Compressors & Clutches - 68669,1x Manual
Material
Aluminum Alloy Housing,Cast Iron Pulley,Stainless Steel Valve Plate
Noise Level Range
65-75 dB
Power Source
‎Corded Electric
Voltage
12 V
Mounting Type
Tangent Mount
Clutch Diameter
4.37 in/111.00 mm
Mounting Distance
2.5 in/63.5 mm
Maximum Working Pressure
23 bar
Warranty Period
2-Year
OE Number
6E5Z19D784A,8E5Z19703A,6E5Z19703A,8E5Z19703C
Part Number
68669,6512757,639394,140482NEW,0610281,5512757,140482C,2021993,YCC386,5512371,140482,C2099,6512371,TEM275874,YC2548,YB3071,2021926R,2021993AM,1210X

Highlights

  • #91,322 in Automotive (See Top 100 in Automotive)
  • #81 in Automotive Replacement Air Conditioning Compressors
  • Ensures Fast Refrigeration And Defogging: ①Oil Type:PAG 46;②R-efrigerant Type:R134a;③Pulley Grooves: 6;④Pulley Diameter:4.37 inch ;⑤Compressor type:SP17;⑥Pulley type:Multi-Groove Serpentine;⑦Clutch Included: Yes; ⑧Noise:<72 dB.Our air conditioning compressor supply Stable and Consistent Cooling, It ensures stable and consistent cooling throughout your drive.
  • Widely Compatible: PHILTOP AC Compressor with Clutch Compatible with Fusion 2010-2012 3.0L/2.5L, 2006-2009, Milan 2010-2011 3.0L/2.5L, 2006-2009, MKZ 2010, Zephyr 2006.Please confirm your vehicle details and old part number before ordering.
  • Guaranteed Compatibility : Replaces OEM part numbers:6512371,TEM275874,140482,6512757,2021926,275874,CO11160C,7512371,639394,YC2548,C2099,CS20037,255633,639395,2021992AM,5512757,140482NEW,CS20034,CO11212C,YC2519,140482C,2021993,7512757,67669,8E5Z19703A,2021992,68669,YCC386,140482NC,6E5Z19703A,8E5Z19703C,6E5Z19D784A,5512371,0610281,YB3071,2021926R,2021993AM,1210X,T68669,330306T3NEW,AC1208921,208921,CWK639394,CO11160Z,CO11212SC,CO11212Z,CO11296G,140422N,2011554,2021926AM,A75874,1AMAC00101.Verify y
  • Fully Tested & Easy Installation: The ac compressor with clutch has been examined and tested carefully before its delivery. Air conditioning compressor is pre-filled with oil upon delivery, therefore, there is no need to add oil during initial use. Excessive oil addition may damage the ac compressor.
  • Low Noise & Low Fuel Consumption: AC compressor works excellent and has low noise with a better experience. With a lower load factor, low power will be input when driving at high speed, which increases fuel economy and makes operation smoothly.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2006 - 20092010 - 20122006 - 20092010 - 20122006 - 20122006 - 20092010 - 20122006 - 2012201020062006 - 20092010 - 20112006 - 20092006 - 20092010 - 20112006 - 2011
MakeFordFordFordFordFordFordFordFordLincolnLincolnMercuryMercuryMercuryMercuryMercuryMercury
ModelFusionFusionFusionFusionFusionFusionFusionFusionMKZZephyrMilanMilanMilanMilanMilanMilan
TrimSSSESESESELSELSELBaseBaseBaseBaseBasePremierPremierPremier
Engine2.3L L42.5L L42.3L L42.5L L43.0L V62.3L L42.5L L43.0L V63.5L V63.0L V62.3L L42.5L L43.0L V62.3L L42.5L L43.0L V6
Note
w/ 4-3/8Inch Dia. Pulley; w/ SP17 Compressor
w/ 4-3/8Inch Dia. Pulley; w/ SP17 Compressor
w/ 4-3/8Inch Dia. Pulley; w/ SP17 Compressor
w/ 4-3/8Inch Dia. Pulley; w/ SP17 Compressor
w/ 4-3/8Inch Dia. Pulley; w/ SP17 Compressor
w/ 4-3/8Inch Dia. Pulley; w/ SP17 Compressor
w/ 4-3/8Inch Dia. Pulley; w/ SP17 Compressor
w/ 4-3/8Inch Dia. Pulley; w/ SP17 Compressor
w/ 4-3/8Inch Dia. Pulley; w/ SP17 Compressor
w/ 4-3/8Inch Dia. Pulley; w/ SP17 Compressor
w/ 4-3/8Inch Dia. Pulley; w/ SP17 Compressor
w/ 4-3/8Inch Dia. Pulley; w/ SP17 Compressor
w/ 4-3/8Inch Dia. Pulley; w/ SP17 Compressor
w/ 4-3/8Inch Dia. Pulley; w/ SP17 Compressor
w/ 4-3/8Inch Dia. Pulley; w/ SP17 Compressor
w/ 4-3/8Inch Dia. Pulley; w/ SP17 Compressor

How to Install?

Related Diagnostic Codes

  • P0530-A/C refrigerant pressure sensor circuit — inspect the sensor connector, wiring and refrigerant pressure.
  • P0531-Pressure sensor circuit range/performance — check the refrigerant charge, sensor signal and system pressure.
  • P0532–P0533-Pressure sensor circuit low/high input — inspect for wiring faults, refrigerant leaks, overcharging or excessive system pressure.
  • P0646-A/C compressor clutch relay control circuit low — check the relay, power supply, ground connection and related wiring.

These codes may relate to the A/C control system and do not necessarily indicate a faulty compressor. Perform a complete system diagnosis before replacement.

Checks Before Installation

  • Compare the new compressor with the original. Confirm the electrical connector, mounting holes, pulley specifications, and high- and low-pressure port locations match.
  • Check the connector terminals for damage, oxidation or corrosion.
  • Verify the correct refrigerant type, PAG oil type and oil quantity. Shipping oil may not meet the vehicle’s requirements.
  • Inspect the lines and condenser for leaks, blockage or metal contamination. Flush the system if the old compressor seized or failed internally.
  • Recover the refrigerant with approved equipment. Disconnect the battery and allow the engine to cool.

Installation Steps

  • Step-1: Recover the Refrigerant:Professionally recover the refrigerant. Do not release it into the atmosphere or mix different refrigerant types.
  • Step-2: Remove the Old Compressor:Photograph the original layout and label the high-pressure (H) and low-pressure (L) lines. Remove the belt, wiring and refrigerant lines, then seal all open ports immediately.
  • Step-3: Inspect and Clean the System:Check the lines, condenser, expansion valve and receiver-drier for debris or blockage. Flush or replace contaminated components as required.
  • Step-4: Prepare the New Compressor:Adjust the refrigerant oil to the vehicle manufacturer’s specified type and quantity. Do not mix different oil types.
  • Step-5: Install the Compressor:Hand-start the mounting bolts and tighten them diagonally to the specified torque. Install new oil-lubricated O-rings, then reconnect the wiring and H/L lines according to the labels.
  • Step-6: Evacuate and Recharge:Reinstall and tension the drive belt. Evacuate the system for at least 30 minutes, then charge the specified type and amount of refrigerant.

Product Description

PHILTOP AC CompressorAC Compressor

Reviews

4.8/5

Based on 8 reviews

575%
425%
30%
20%
10%

Evan b.

04/12/2026

Verified buyer

I recently replaced the AC compressor in my 2007 Ford Fusion with the PHILTOP 68669 model, and I have to say I'm quite impressed. The installation process was pretty straightforward, and I appreciated that it came with a clutch, which made it all the more convenient. After getting it installed, I noted a significant improvement in my car's cooling performance. The air conditioning works like a charm now, blowing cold air in no time, even on the hottest days.What stood out to me was how smooth the compressor operates; there are no strange noises or vibrations, which is a big relief. I was a bit hesitant at first, wondering if this would be a reliable replacement, but it has held up well so far. Overall, it seems like a solid purchase for anyone looking to replace their AC compressor in a Ford Fusion or Milan. I would recommend giving it a try if you're facing AC issues in those models!

Rosa amalia sabin

06/05/2025

Verified buyer

Súper calidad

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

A/C compressor replacement usually requires refrigerant recovery, vacuum, measured charging, and contamination checks. Professional service is recommended when the required equipment or procedures are unavailable.

Check oil quantity, refrigerant charge, belt alignment and tension, mounting, and system pressure. Stop operating the A/C if severe noise or binding occurs and inspect the system.