PHILTOP 8Pcs Front Control Arms w/Ball Joint & Sway Bar End Links & Outer Tie Rods for 2006-2008 Ram 1500 4WD, K620174 K

PHILTOP 8Pcs Front Control Arms w/Ball Joint & Sway Bar End Links & Outer Tie Rods for 2006-2008 Ram 1500 4WD, K620174 K

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8315CAK492NUS

Specifications

Brand
PHILTOP
Items Included
2x Front Outer Tie Rod Ends - ES80574 1x Front Upper Right Control Arm W/ Ball Joint - K620174 1x Front Upper Left Control Arm W/ Ball Joint - K620175 2x Front Lower Suspension Ball Joints - K7411 2x Front Stabilizer Sway Bar End Links - K80894
Quantity
8
Position
Front Upper
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
ES80574,K620174,K620175,K7411,K80894,MES80574,TA5218,MK7411,TC5385,MK80894,TC6952,RK620174,RK620175

Highlights

  • #41,554 in Automotive (See Top 100 in Automotive)
  • #77 in Automotive Replacement Control Arms
  • Confirmed Fit: Compatiable with Ram 1500 5.7L 2006-2008, Ram 1500 4.7L 2006-2008, Ram 1500 3.7L 2006-2008
  • Kit Includes: 2x Front Outer Tie Rod Ends - ES80574, 1x Front Upper Right Control Arm w/ Ball Joint - K620174, 1x Front Upper Left Control Arm w/ Ball Joint - K620175, 2x Front Lower Suspension Ball Joints - K7411, 2x Front Stabilizer Sway Bar End Links - K80894
  • Superior Quality: Coating with corrosion protection and promoting a longer service life, effectively help reducing the road noise and vibration. The high-strength steel body makes it more stable
  • Long Service Life: Designed to handle severe impacts and repetitive loads through heat-treatment.Coatings to studs inhibit corrosion to promote a long service life
  • Easy to install: Excellent product design and manufacturing technology make PHILTOP control arms better fit your car and make your installation fast and simple

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2006 - 20072006 - 20082006 - 20082006 - 20082006 - 20082006 - 20082006 - 20082008200820082006 - 20072006 - 20072006 - 2007
MakeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodge
ModelRam 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500
TrimLaramieLaramieSLTSLTSTSTSTSXTSXTSXTSportTRX4TRX4
Engine4.7L V85.7L V84.7L V85.7L V83.7L V64.7L V85.7L V83.7L V64.7L V85.7L V85.7L V84.7L V85.7L V8
Note
5 lug wheel only
5 lug wheel only
5 lug wheel only
5 lug wheel only
5 lug wheel only
5 lug wheel only
5 lug wheel only
5 lug wheel only
5 lug wheel only
5 lug wheel only
5 lug wheel only
5 lug wheel only
5 lug wheel only

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

4.4/5

Based on 5 reviews

560%
420%
320%
20%
10%

AutoMom_2019_12

04/25/2026

Got this kit for my truck and it arrived much sooner than I expected. All the components were there and fit perfectly. Getting the old parts off was the hardest part, but putting these on was easy.

Emma_DailyCommute_370

03/18/2026

My Ram 1500 was all over the place, but this kit completely transformed the handling. Steering is precise, and there's no more play in the wheel. Feels like a new truck.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.