PHILTOP 8Pcs Front Suspension Kit Fit for F150 2005-2008, Mark LT 2006-2008,2 Upper Control Arms w/Ball Joint Assembly+2 Lower B

PHILTOP 8Pcs Front Suspension Kit Fit for F150 2005-2008, Mark LT 2006-2008,2 Upper Control Arms w/Ball Joint Assembly+2 Lower B

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8397CAK192JUS

Specifications

Brand
PHILTOP
Items Included
1x Front Upper Left Control Arm & Ball Joint Assembly - K80306 1x Front Upper Right Control Arm & Ball Joint Assembly - K80308 2x Front Lower Ball Joint - K80149 2x Front Stabilizer Sway Bar End Link - K80338 2x Outer Tie Rod End Link - ES3691
Quantity
8
Position
Front Upper
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
6L1Z3079BA,MCSOE7,7L1Z3084A,9L3Z3085A,6L3Z3085AL,4L3Z3084AB,4L3Z3084AA,6L3Z3084AR,4L3Z3085AB,4L3Z3085AA,7L1Z3085A,9L3Z3084A,BL3Z3084A,EL3Z3084A,BL3Z3085A,EL3Z3085A,2L1Z3050A,4L3Z3A130CA,EL3Z3084B,EL3Z3085B,5L3Z5K483DA
Part Number
ES3691,K80149,K80338,RK80308,RK80306,MK80149,MK80338,MES3691,TC5390,TA2763,TC5684,GK80149,GK80338,TO86435XL,TO86435RD,BJ85045XL

Highlights

  • #23,981 in Automotive (See Top 100 in Automotive)
  • #45 in Automotive Replacement Control Arms
  • Vehicle Specific: PHILTOP Control Arms for F150 2004-2008, Mark LT 2006-2008
  • Package Contents: 1x Front Upper Left Control Arm & Ball Joint Assembly - K80306, 1x Front Upper Right Control Arm & Ball Joint Assembly - K80308, 2x Front Lower Ball Joint - K80149, 2x Front Stabilizer Sway Bar End Link - K80338, 2x Outer Tie Rod End Link - ES3691
  • Increased Stability: Suspension kits play an important role in the ride, enhancing suspension performance, stability and steering response. The entire kit is designed to provide a smoother, more reliable ride
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2005 - 20082006 - 20082005 - 20082005 - 200820082005 - 20082005 - 2008200820082005 - 20082005 - 20082005 - 20082005 - 20082005 - 20082005 - 20082006 - 2008
MakeFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordLincoln
ModelF-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150Mark LT
TrimFX4Harley-Davidson EditionKing RanchLariatLimitedSTXSTXTHE 60TH ANNIVERSARY EDITIONTHE 60TH ANNIVERSARY EDITIONXLXLXLXLTXLTXLTBase
Engine5.4L V85.4L V85.4L V85.4L V85.4L V84.2L V64.6L V84.6L V85.4L V84.2L V64.6L V85.4L V84.2L V64.6L V85.4L V85.4L V8
Note----------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.5/5

Based on 4 reviews

575%
40%
325%
20%
10%

Lisa_CivicDriver_255

04/03/2026

Everything arrived quickly and was packaged well. The kit included all the necessary components, making the installation process much smoother. Great value for a complete set.

Chris_GearHead_189

02/20/2026

This kit completely transformed my F150's handling. No more clunks or vibrations, just a smooth, controlled ride. It feels like a completely different truck.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.