2008-2012 Honda Accord 2.4L L4 | 8 PC Front Upper Control Arm | OE#51520TA0A03/K90456 - PHILTOP

2008-2012 Honda Accord 2.4L L4 | 8 PC Front Upper Control Arm | OE#51520TA0A03/K90456 - PHILTOP

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8961CAK4771US

Specifications

Brand
PHILTOP
Items Included
1x Front Driver Upper Control Arm with Pre-Assembled Ball Joint - K620614 1x Front Passenger Upper Control Arm with Pre-Assembled Ball Joint - K620615 1x Front Driver Outer Tie Rod End - ES800460 1x Front Passenger Outer Tie Rod End - ES800459 1x Front Driver Sway Bar/ Stabilizer Link - K90456 1x Front Passenger Sway Bar/ Stabilizer Link - K90457 2x Front Lower Ball Joints Set - K500081
Quantity
8
Position
Front Upper
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
51520TA0A03,51321SEAE01,51320SEAE01,51510TA0A03,51321SDAA04,51320TA0A01,51321SDR003,51325TA0A01,51320SDAA04,51320SDR003,53540TA0A01,53560TA0A01
Part Number
K90456,K90457,K500081,ES800459,ES800460,RK620615,RK620614,MK90456,MK90457,TC3634,TC3633,TC1527,TA2783,K500128,CK620615,GS60159,CK620614,GS60160,1026008,1026007,CB59047PR,CB59048PR,JTC7711,534899,ACT656,GS60614,GK90456,SL59041XL

Highlights

  • #48,107 in Automotive (See Top 100 in Automotive)
  • #92 in Automotive Replacement Control Arms
  • Fitment: Control Arms Kit Replacement for 2009 2010 2011 2012 2013 2014 Acura TSX - [2008 2009 2010 2011 2012 Honda Accord]
  • Kit Includes: 1x Front Driver Upper Control Arm with Pre-Assembled Ball Joint - K620614;1x Front Passenger Upper Control Arm with Pre-Assembled Ball Joint - K620615;1x Front Driver Outer Tie Rod End - ES800460;1x Front Passenger Outer Tie Rod End - ES800459;1x Front Driver Sway Bar/ Stabilizer Link - K90456;1x Front Passenger Sway Bar/ Stabilizer Link - K90457;2x Front Lower Ball Joints Set - K500081
  • High Quality: Polishing and rust prevention; the anti-corrosion coating on the control arm can prolong the service life. All materials used for the control arm coating are environmentally friendly
  • Easy Installation: Precision tolerances for easy installation on all parts. Control arm has steering alignment that ensure you a perfect work
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2009 - 20142012 - 20142010 - 20142008 - 20122008 - 20122008 - 20122008 - 20122008 - 20122008 - 20122008 - 20122011 - 2012
MakeAcuraAcuraAcuraHondaHondaHondaHondaHondaHondaHondaHonda
ModelTSXTSXTSXAccordAccordAccordAccordAccordAccordAccordAccord
TrimBaseSpecial EditionV6EXEXEX-LEX-LLXLX-PLX-SSE
Engine2.4L L42.4L L43.5L V62.4L L43.5L V62.4L L43.5L V62.4L L42.4L L42.4L L42.4L L4
Note-----------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

4.5/5

Based on 6 reviews

567%
417%
317%
20%
10%

Amanda_MomOfThree_713

04/14/2026

Solid construction on these parts, you can tell they're built to last. A great deal for the price. My Accord's suspension feels tight and responsive again.

Tom_Handy_257

12/11/2025

The delivery was quick and everything was packaged securely. Installation was surprisingly easy, all the bolts lined up. My Honda feels much more controlled now.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.