#133,459 in Automotive (See Top 100 in Automotive)
#186 in Automotive Replacement Air Conditioning Compressors
Ensures Fast Refrigeration And Defogging: ①Oil Type:PAG 46;②R-efrigerant Type:R134a;③Pulley Grooves: 4;④Pulley Diameter:4.25 inch ;⑤Compressor type:10S20F;⑥Pulley type:Multi-Groove Serpentine;⑦Clutch Included: Yes; ⑧Noise:<72 dB.Our air conditioning compressor supply Stable and Consistent Cooling, It ensures stable and consistent cooling throughout your drive.
Guaranteed Compatibility : Replaces OEM part numbers:7511412,7511414,031873,1868N,19130457,1421127AFT,86811109,21994155,20880829,CO29002G,77377,2020940AM,CO29002ZI,638363,89024925,1522181R,031867,89023458,8258917910,89023461,22994155,23412818,8981864610,1522181,5875,2021671,2022093,78377,TEM272531,034810N,326024T1NEW,4710316,78376,25891791,2021177,19130450,272531,25940200,8152443210,10000631,1773X,6512557,5512557,4710706,4710708,25940199,8890234600,8150688530,8219941550,8151003370,4472204416,152
Fully Tested & Easy Installation: The ac compressor with clutch has been examined and tested carefully before its delivery. Air conditioning compressor is pre-filled with oil upon delivery, therefore, there is no need to add oil during initial use. Excessive oil addition may damage the ac compressor.
Low Noise & Low Fuel Consumption: AC compressor works excellent and has low noise with a better experience. With a lower load factor, low power will be input when driving at high speed, which increases fuel economy and makes operation smoothly.
w/ 10S17F Compressor; New w/ Clutch; May Require use of OE Manifold. DeSlugger Recommended to Eliminate Compressor Damage on Vehicles with Low Mount Compressor; Replacement of Stretch Fit Belt is Required
w/ 10S17F Compressor; New w/ Clutch; May Require use of OE Manifold. DeSlugger Recommended to Eliminate Compressor Damage on Vehicles with Low Mount Compressor; Replacement of Stretch Fit Belt is Required
w/ 10S17F Compressor
w/ 10S17F Compressor
w/ 10S17F Compressor
w/ 10S17F Compressor
How to Install?
Related Diagnostic Codes
P0530-A/C refrigerant pressure sensor circuit — inspect the sensor connector, wiring and refrigerant pressure.
P0531-Pressure sensor circuit range/performance — check the refrigerant charge, sensor signal and system pressure.
P0532–P0533-Pressure sensor circuit low/high input — inspect for wiring faults, refrigerant leaks, overcharging or excessive system pressure.
P0646-A/C compressor clutch relay control circuit low — check the relay, power supply, ground connection and related wiring.
These codes may relate to the A/C control system and do not necessarily indicate a faulty compressor. Perform a complete system diagnosis before replacement.
Checks Before Installation
Compare the new compressor with the original. Confirm the electrical connector, mounting holes, pulley specifications, and high- and low-pressure port locations match.
Check the connector terminals for damage, oxidation or corrosion.
Verify the correct refrigerant type, PAG oil type and oil quantity. Shipping oil may not meet the vehicle’s requirements.
Inspect the lines and condenser for leaks, blockage or metal contamination. Flush the system if the old compressor seized or failed internally.
Recover the refrigerant with approved equipment. Disconnect the battery and allow the engine to cool.
Installation Steps
Step-1: Recover the Refrigerant:Professionally recover the refrigerant. Do not release it into the atmosphere or mix different refrigerant types.
Step-2: Remove the Old Compressor:Photograph the original layout and label the high-pressure (H) and low-pressure (L) lines. Remove the belt, wiring and refrigerant lines, then seal all open ports immediately.
Step-3: Inspect and Clean the System:Check the lines, condenser, expansion valve and receiver-drier for debris or blockage. Flush or replace contaminated components as required.
Step-4: Prepare the New Compressor:Adjust the refrigerant oil to the vehicle manufacturer’s specified type and quantity. Do not mix different oil types.
Step-5: Install the Compressor:Hand-start the mounting bolts and tighten them diagonally to the specified torque. Install new oil-lubricated O-rings, then reconnect the wiring and H/L lines according to the labels.
Step-6: Evacuate and Recharge:Reinstall and tension the drive belt. Evacuate the system for at least 30 minutes, then charge the specified type and amount of refrigerant.
Product Description
Reviews
4.6/5
Based on 7 reviews
5
71%
4
14%
3
14%
2
0%
1
0%
S
STEIN
04/07/2025
Verified buyer
Exact fit and functionality for my 08 Silverado. It is working just as it should and is quiet enough it’s hardly noticeable. Installation was what you would expect for this job, it’s not really hard it’s just so involved by the time you recover the gas and pull vacuum on it and recharge the system. Seems like a well made component. If it lasts then I’d say it’s a fair value.
A
Ashley_RoadTrip_716
03/08/2026
My car's air conditioning was completely shot, but this compressor fixed it. It's blowing ice cold air now, and I couldn't be happier. Definitely a worthwhile replacement.
FAQS
Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.
Some applications may specify rotating the compressor by hand before start-up or using a particular initial operating procedure. Follow the instructions supplied with the part and the vehicle service information.
Confirm that the compressor is the source of the problem and inspect the belt drive, electrical circuit, refrigerant charge, leaks, and other A/C components. Similar symptoms may have different causes.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
Aluminum Alloy Housing,Cast Iron Pulley,Stainless Steel Valve Plate
Noise Level Range
65-75 dB
#133,459 in Automotive (See Top 100 in Automotive)
#186 in Automotive Replacement Air Conditioning Compressors
Ensures Fast Refrigeration And Defogging: ①Oil Type:PAG 46;②R-efrigerant Type:R134a;③Pulley Grooves: 4;④Pulley Diameter:4.25 inch ;⑤Compressor type:10S20F;⑥Pulley type:Multi-Groove Serpentine;⑦Clutch Included: Yes; ⑧Noise:<72 dB.Our air conditioning compressor supply Stable and Consistent Cooling, It ensures stable and consistent cooling throughout your drive.
Guaranteed Compatibility : Replaces OEM part numbers:7511412,7511414,031873,1868N,19130457,1421127AFT,86811109,21994155,20880829,CO29002G,77377,2020940AM,CO29002ZI,638363,89024925,1522181R,031867,89023458,8258917910,89023461,22994155,23412818,8981864610,1522181,5875,2021671,2022093,78377,TEM272531,034810N,326024T1NEW,4710316,78376,25891791,2021177,19130450,272531,25940200,8152443210,10000631,1773X,6512557,5512557,4710706,4710708,25940199,8890234600,8150688530,8219941550,8151003370,4472204416,152
Fully Tested & Easy Installation: The ac compressor with clutch has been examined and tested carefully before its delivery. Air conditioning compressor is pre-filled with oil upon delivery, therefore, there is no need to add oil during initial use. Excessive oil addition may damage the ac compressor.
Low Noise & Low Fuel Consumption: AC compressor works excellent and has low noise with a better experience. With a lower load factor, low power will be input when driving at high speed, which increases fuel economy and makes operation smoothly.
w/ 10S17F Compressor; New w/ Clutch; May Require use of OE Manifold. DeSlugger Recommended to Eliminate Compressor Damage on Vehicles with Low Mount Compressor; Replacement of Stretch Fit Belt is Required
2021 - 2025
Isuzu
NPR-HD
Base
6.6L V8
w/ 10S17F Compressor; New w/ Clutch; May Require use of OE Manifold. DeSlugger Recommended to Eliminate Compressor Damage on Vehicles with Low Mount Compressor; Replacement of Stretch Fit Belt is Required
2022
Isuzu
NQR
Base
6.0L V8
w/ 10S17F Compressor
2024 - 2025
Isuzu
NQR
Base
6.6L V8
w/ 10S17F Compressor
2022
Isuzu
NRR
Base
6.0L V8
w/ 10S17F Compressor
2024 - 2025
Isuzu
NRR
Base
6.6L V8
w/ 10S17F Compressor
Product Specifications
Brand
PHILTOP
Oil Type
Pag 46
Compressor Type
10S20F
Belt Type
Multi-Groove Serpentine
Refrigerant Type
R134a
Pulley Groove Count
4
Items Included
1x A/C Compressors & Clutches - 78377,1x Manual
Material
Aluminum Alloy Housing,Cast Iron Pulley,Stainless Steel Valve Plate
P0530-A/C refrigerant pressure sensor circuit — inspect the sensor connector, wiring and refrigerant pressure.
P0531-Pressure sensor circuit range/performance — check the refrigerant charge, sensor signal and system pressure.
P0532–P0533-Pressure sensor circuit low/high input — inspect for wiring faults, refrigerant leaks, overcharging or excessive system pressure.
P0646-A/C compressor clutch relay control circuit low — check the relay, power supply, ground connection and related wiring.
These codes may relate to the A/C control system and do not necessarily indicate a faulty compressor. Perform a complete system diagnosis before replacement.
Checks Before Installation
Compare the new compressor with the original. Confirm the electrical connector, mounting holes, pulley specifications, and high- and low-pressure port locations match.
Check the connector terminals for damage, oxidation or corrosion.
Verify the correct refrigerant type, PAG oil type and oil quantity. Shipping oil may not meet the vehicle’s requirements.
Inspect the lines and condenser for leaks, blockage or metal contamination. Flush the system if the old compressor seized or failed internally.
Recover the refrigerant with approved equipment. Disconnect the battery and allow the engine to cool.
Installation Steps
Step-1: Recover the Refrigerant:Professionally recover the refrigerant. Do not release it into the atmosphere or mix different refrigerant types.
Step-2: Remove the Old Compressor:Photograph the original layout and label the high-pressure (H) and low-pressure (L) lines. Remove the belt, wiring and refrigerant lines, then seal all open ports immediately.
Step-3: Inspect and Clean the System:Check the lines, condenser, expansion valve and receiver-drier for debris or blockage. Flush or replace contaminated components as required.
Step-4: Prepare the New Compressor:Adjust the refrigerant oil to the vehicle manufacturer’s specified type and quantity. Do not mix different oil types.
Step-5: Install the Compressor:Hand-start the mounting bolts and tighten them diagonally to the specified torque. Install new oil-lubricated O-rings, then reconnect the wiring and H/L lines according to the labels.
Step-6: Evacuate and Recharge:Reinstall and tension the drive belt. Evacuate the system for at least 30 minutes, then charge the specified type and amount of refrigerant.
Product Description
Reviews
4.6/5
Based on 7 reviews
5
71%
4
14%
3
14%
2
0%
1
0%
S
STEIN
Apr 07,2025
Verified buyer
Exact fit and functionality for my 08 Silverado. It is working just as it should and is quiet enough it’s hardly noticeable. Installation was what you would expect for this job, it’s not really hard it’s just so involved by the time you recover the gas and pull vacuum on it and recharge the system. Seems like a well made component. If it lasts then I’d say it’s a fair value.
A
Ashley_RoadTrip_716
Mar 08,2026
My car's air conditioning was completely shot, but this compressor fixed it. It's blowing ice cold air now, and I couldn't be happier. Definitely a worthwhile replacement.
FAQS
Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.
Some applications may specify rotating the compressor by hand before start-up or using a particular initial operating procedure. Follow the instructions supplied with the part and the vehicle service information.
Confirm that the compressor is the source of the problem and inspect the belt drive, electrical circuit, refrigerant charge, leaks, and other A/C components. Similar symptoms may have different causes.