2010-2013 Toyota 4Runner 4.0L V6 | 7-Groove Pulley 100A Alternator | OE#2706031180/2101166 - PHILTOP

2010-2013 Toyota 4Runner 4.0L V6 | 7-Groove Pulley 100A Alternator | OE#2706031180/2101166 - PHILTOP

Pulley Grooves: S7

Amperage: 100 A

Built to Last

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1319ANR371QUS

Specifications

Brand
PHILTOP
Pulley Grooves
S7
Amperage
100 A
Rotation Direction
CW
Regulator
IR
Fan Type
IF
Voltage
12 V
Material
Pure Copper Windings, Silicon Steel Laminations, Aluminum Housing
Items Included
1x Alternator 11517N 1x Manual
Warranty Period
2-Year
OE Number
2706031180
Part Number
2101166,2100741,AL3389X

Highlights

  • Reference Alternators Part Number: 1042102840, 11517, 2706031180, 2706031260, 2101166, A3517, 1042118602, 2100741, AL3389X
  • Automotive alternator specifications: Amperage Rating -100Amp,Voltage -12 Volt,Groove Pulley-S7,Rotation-CW,Specs For-,Design-IR/IF,Plug Clock--
  • Compatibility:2011-2013 4Runner,2010-2014 FJ Cruiser,2010 4Runner 4.0L,2011-2014 Tundra 4.0L
  • OEM Standards: Designed to meet rigorous OEM specifications, the PHILTOP Car Alternator is crafted from premium-grade materials and undergoes exhaustive quality testing. Leveraging cutting-edge energy conversion technology, it minimizes power loss to boost fuel efficiency and extend battery lifespan. Its robust construction ensures reliable operation under extreme temperatures, vibrations, and harsh driving conditions, delivering unmatched durability and longevity.
  • Note:If your car has problems like starting difficulty, lack of power, increased fuel consumption, charging system failure, or strange noises, replace the alternator promptly. Before installation, verify your vehicle make, model, year, engine, and OEM part number. Note that the alternator's appearance may differ from your original part, but it is typically fully interchangeable and compatible in function and fitment. If in doubt, send us a photo to confirm; if in doubt, send us a photo to confirm.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20102011 - 201320102011 - 201320102011 - 20132010 - 20142011 - 201320142011
MakeToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
Model4Runner4Runner4Runner4Runner4Runner4RunnerFJ CruiserTundraTundraTundra
TrimLimitedLimitedSR5SR5TrailTrailBaseBaseSRSR5
Engine4.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.0L V6
Note
w/o Front and Rear 120V Outlets
-
w/o Front and Rear 120V Outlets
-
w/o Front and Rear 120V Outlets
-----

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, charging output, and connections.
  • P0563-High system voltage:check voltage regulation and grounds.
  • P0620-Generator control circuit fault:check control wiring and connections.
  • P0621-Generator lamp/L terminal circuit fault:check the warning-light circuit.
  • P0622-Generator field/F terminal circuit fault:check the field circuit and connections.
  • P065B-Generator control circuit range/performance:check charging performance and control signals.

Codes alone do not confirm alternator failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points and electrical connectors to the original alternator.
  • Check the battery: Charge and test the battery before installation.
  • Inspect the drive system: Check the belt, tensioner, wiring, and terminals for wear, damage, or corrosion.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the belt routing and wiring connections. Release belt tension and remove the belt from the alternator pulley.
  • STEP 3 — Disconnect the power cable and electrical connectors. Support the alternator and remove its mounting bolts.
  • STEP 4 — Install the new alternator and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the wiring and reinstall the belt. Confirm correct belt routing, alignment, and tension before reconnecting the negative battery cable.

After Installation

  • Check that all connections are secure and the belt is seated correctly.
  • Start the engine and confirm the charging warning light turns off.
  • Check charging voltage at the battery against the vehicle manufacturer’s specifications.
  • Switch on the headlights and blower to check charging performance under load. Listen for belt squeal or unusual noise.

Product Video

Product Description

Reviews

4.4/5

Based on 7 reviews

557%
429%
314%
20%
10%

Jason_Trucks_870

01/18/2026

I was surprised at how fast this arrived. It was a direct fit for my Tundra and took very little effort to get it installed and running.

Brad_AutoParts_941

12/28/2025

My old alternator was barely putting out 12 volts, but this one is rock steady at 14.4. It's a huge improvement and the truck starts up much easier now.

FAQS

PHILTOP Alternator are specifically designed for [specific vehicle models]. You can check the vehicle compatibility and product images on this page, or reach out for confirmation to ensure a perfect match.

Please refer to the picture. Generally,our alternators do not include bolts or other accessories. It is recommended to make full use of the existing bolts and other accessories, which can be perfectly matched with the original accessories.

Check the package contents listed on the product page. If an included item is missing, contact us with your order number and photos of everything received.